Technology (Technical drawing, information chain, energy chain.........)

Doctor and graduate in mechanical engineering, I give private lessons at the following level: * Kinematic Model Course (direct or inverse) * Dynamic Model Course (direct or reverse) * Static Model Course (direct or inverse) * Course Planning the trajectory * Robot Control Course * Programming course on Matlab or RoboStudio.

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems. - Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws. - Electronic components: Resistors, capacitors, inductors, diodes. - Operational amplifiers: Operation, characteristics, applications. - Basic analog circuits: Amplifiers, filters, oscillators. - Introduction to digital electronics: Binary logic, logic gates, combinational circuits. - Numbering systems: Conversion between bases, adders, subtractors. - Transistors: Bipolar transistors, field effect transistors, characteristics, applications. - Transistor amplifiers: Configuration, gain calculations, stability. - Analog integrated circuits: Voltage regulators, A/D and D/A converters. - Sequential digital systems: Flip-flops, registers, counters. - Microcontrollers and microprocessors: Architecture, basic programming, interfaces. - Analysis of electronic circuits: Frequency and time analysis methods. - Advanced analog circuits: Differential amplifiers, power amplifiers, active filters. - Modulation and demodulation techniques: AM, FM, PM. - Embedded systems: Design of real-time systems, communication between peripherals. - Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators. -

Lessons for mechanical, industrial and electrical engineering students. Ability to understand and communicate information easily and smoothly, God willing. Five years of experience teaching engineering college courses at various universities in Saudi Arabia, Kuwait, Cairo and the Emirates. Holds a master's degree and a preliminary doctorate.

In these Engineering Classes, I guide, mentor, and facilitate your growth and intuitive technical understanding. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Contact me here to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, Aero/ Flight Dynamics, Control Systems, Dynamic Structures, Business Data Analysis, or any other topics. Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way. Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you! __________________________________________________________________________________ Previously supported students from top universities such as: UK: - Imperial College London (+ Business School) (ICL) - University College London (UCL) - King's College London (KCL) NL: - Delft University of Technology (TUDelft) - University of Amsterdam - University of Groningen SW - ETH Zurich - Swiss Federal Institute of Technology AU - Queensland University of Technology - University of Queensland - Griffith University __________________________________________________________________________________ A little about myself: My name is Anh; I was born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences, and Engineering, with 4 years of working experience in the Aerospace and Maritime industry. I have a fun, ambitious, and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding: - a degree as a Master of Aeronautical Engineering from Imperial College London, - A*A*A* A-Level Further Maths and Physics, with, - straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming). Digital electronics Analog electronic electromagnetism (propagation of high frequency waves) Automatic (continuous, sampled) electrical engineering (transformers, electrical machines, switching power supply) C / c ++ programming, Assembler, ARM, STM32 renewable energy (wind, PV) engineering Sciences RDM Python,VHDL PIC Microprocessor and Microcontroller Signal processing and data acquisition Engineering Sciences These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes. COURSE OBJECTIVES AND PEDAGOGICAL APPROACH Resumption and deepening of fundamental concepts through exercises with course reminders. Put the student in a situation of questioning and research. Respond to individual issues and questions Exercise training in order to achieve real mastery of the content. Learn to build theoretical reasoning from observable facts or hypotheses. Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background) This educational approach is effective since it has often led me to interesting results with my students. Associate professor provides support courses in electrical engineering

I'm an experienced tutor and Aerospace Engineer working as a control engineer in the space business. I hold a 5-year experience tutoring more than 60 engineering undergrad students, helping them understand the technical contents and prepare for their exams. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Among the subjects I've previously taught you can find Controls, Flight Mechanics, Fluid Mechanics, Design, Aerospace Structures, among many others. I've also helped students with their dissertations and even mentored students in their transition to the profesional world. __________________________________________________________________________________ Previously supported students in Aerospace, Mechanical, Electrical Engineering, among others, from universities like: UK: - University of Bristol - Swansea University - Imperial College London (+ Business School) - University College London - King's College London NL: - Delft University of Technology SW - ETH Zurich - Swiss Federal Institute of Technology ES: - Universidad Carlos III de Madrid - Universidad Politécnica de Madrid

Hello, I am an Electronics and Automation Engineer with a specialization in Electromechanical Automation Systems. As a project manager in maritime signaling, I am well-positioned to teach electrical engineering and electronics subjects using practical and real-world examples. I am available to teach in both French and Arabic, covering a range of topics such as microcontrollers, embedded systems, motors, power electronics, digital system design, digital circuits, and more. Additionally, I offer programming and other core courses in electrical engineering and electronics. If you are looking for an experienced teacher to help deepen your understanding of electrical engineering and electronics, please do not hesitate to contact me. I am excited to help you achieve your goals.

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics. Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects. Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies. Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life. Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life. Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently. Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Associate professor giving support courses in the subjects of Physics and Engineering Sciences dedicated to students in Technical Baccalaureate, Higher Technician Certificate BTS and in CPGE preparatory classes (MPSI, TSI, PSI). The objective is to strengthen your foundations and deepen your knowledge to succeed in your DS and exams. 1. Industrial sciences: Analytical and graphical statics - Kinematics - Kinetics - Dynamics - Energetics Automatic Linear - servo control Industrial design - theory of mechanisms 2. Physics: Thermodynamics - electrokinetics - mechanics of the material point and of non-deformable solids.

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology). I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB. Some of the finite element modeling and numerical simulations I have worked on include: - Multiscale finite element modeling for fatigue crack propagation in porous materials. - Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper]. - Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles. - Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials. - Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions. If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Hi, I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success. Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs. Feel free to contact me for more information !

Tutoring help for design and manufacture/ product design, please provide me with topics you would like assistance on and I can tailor a lesson for your needs. I am a professional product design engineer, have a masters degree with distinction from the university of Strathclyde and an A at higher from the SQA.

Associate professor in engineering sciences, 5 years of professional experience at all levels, college, high school, university, preparatory classes, engineering schools. Gives courses from college to university, preparation for exams, revisions, oral preparation, development of study methodologies. Webcam lessons

✅ Experienced teacher offering private online physics lessons for all levels. ✅ Fully dedicated and focused on student progress. ✅ Very patient, systematic, and organized. I teach a wide range of topics in physics, including but not limited to: 5- Physical quantities and units - Kinematics (types of motion, kinematics of point particles and rigid bodies) - Dynamics (frictional and inertial forces, Newton's laws) - Laws of conservation (energy, momentum) - Theory of collision processes - Inertial and non-inertial reference frames - Potential and kinetic energy - Gravitation and gravity fields - Oscillatory and wave motions - Harmonic oscillator - Doppler effect - Standing waves - Sound waves and physical characteristics of sound - Surface tension and capillary phenomena - Fluid mechanics - Temperature and heat - Calorimetry - Phase transitions - Principles of thermodynamics - Electrostatics - Electromagnetism - Kirchhoff's laws - Electronic circuits - Dielectrics - Optics ... and much more. If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Electrical engineering is the foundation of modern technology, powering everything from household appliances to industrial automation. This class is designed to introduce beginners to the core concepts of electrical engineering, making complex topics easy to understand. You will learn about: Basic electrical concepts: Voltage, current, resistance, and power Circuit analysis techniques: Ohm’s Law, Kirchhoff’s Laws, and network theorems Introduction to electronic components: Resistors, capacitors, diodes, and transistors etc Hands-on projects using breadboards and simulation software By the end of this course, students will have a strong understanding of electrical fundamentals and be able to apply them in real-world applications, including Arduino and Raspberry Pi projects.