1) Aircraft Propulsion and Gas Turbine Engine Theory

From 31.66 C$ /h

The class could be organized based on the student background, it may cover a combination of the following courses:
1-Gas Turbine Engine Theory
2-Aero-Engine Propulsion
3-Turbomachinery
4-Gas Dynamics (compressible flow)
5-Fluid Mechanics (incompressible flow)

Extra information

Should be studied thermodynamics and fluid mechanics

Location

Online from Austria

About Me

I always use the interactive techniques in my classes, follow on support, and mind mapping for different matter of issues in any non understood point.
Based on my previous experience as a professional and academic.

Education

1-PhD candidate of Mechanical Power Engineering-Zagazig University
2- MSc. Of Mechanical Power Engineering-Zagazig University
3- BSc. Of Aerospace Engineering-Military Technical College

Experience / Qualifications

MSc. Thesis(Modeling and Simulation of Double Spool TurboFan Engine Using SIMULINK)
PhD thesis (Axial Flow Compressor Deterioration Due to Water Ingestion in Jet Engines)

Age

Adults (18-64 years old)

Student level

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Skills

Mechanical engineering

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Haider

5.0

(6)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered in

✔ Structural engineering
✔ Design
✔ Test method and technique
✔ Measurement technology
✔ FEA
✔ Fluid mechanics
✔ Hydromechanics
✔ Structural mechanics
✔ Fluid mechanics
✔ Electric drives
✔ Fluid dynamics
✔ MS Office (Word, PowerPoint, Excel, Visio, Project, Access, Outlook)

+ other subjects on request

When contacting please
Class / study / training and subject
notify!

I'm looking forward to your messages.

Alonso

5.0

(6)

I am a Full Professor of Mechanical Engineering with 30 years of experience in areas such as Strength of Materials, Stability, Physics (Kinematics and Dynamics), Statics, Elasticity, Solid Mechanics, Machine Elements, Stress Analysis, Structures and Advanced Materials Mechanics . I emphasize teaching through problem solving and practical applications.
The Strength of Materials classes include topics such as: Stress analysis. Axial load, bending, Torsion, Transverse load, Combined stresses, Stress transformation, Energy methods, Calculation of deflections in beams, statically indeterminate problems, buckling, shear center, compound bending and asymmetric bending, Castigliano's theorem, Mohr's method , Virtual work, Creep and Fracture Criteria, etc.

Abdeer

5.0

(6)

Are you in preparatory classes (CPGE) and want to excel in Engineering Sciences? I offer personalized courses to support you in key subjects, with a pedagogy adapted to your academic needs and your objectives.

Modules taught:
🔧 Strength of Materials (RDM): Analysis of stresses, deformations and dimensioning of structures.
⚙️ Elasticity: Study of elastic solids and resolution of stress and deformation problems.
🌊 Fluid and solid mechanics: Fundamental concepts and applications in the field of fluid structures and systems.
💻 Industrial computing: Programming, automation and simulation of industrial systems.

Highlights of my courses:
✔️ Methodical and structured approach adapted to the CPGE program.
✔️ Typical exercises and solving complex problems.
✔️ Specific preparation for competitive examinations for major engineering schools.
✔️ Clear and detailed teaching materials provided in each session.

For who ?
🎓 Students in scientific preparatory classes (CPGE).
🏫 Students and professionals looking to strengthen their knowledge in SII.

Course organization:

Format: Individually or in small groups.
Modalities: Online or in person depending on your preferences.
Flexibility: Classes tailored to your schedule.

Yassine

5.0

(6)

Associate Professor and Doctor of Mechanical Engineering – Recognized academic expertise, combining scientific rigor and pedagogical excellence.

Private tutor for 10 years – A decade of experience in personalized support and student success.

I do not charge for extra time – My commitment is total: the time needed to understand and master the concepts is included.

Passionate and patient teaching – I teach with kindness, adapting to each individual's pace to transmit knowledge and methods in a lasting way.

Project and internship support – Structured guidance to enhance your work and strengthen your academic and professional record.

Sliding scale pricing based on the number of hours – A fair formula that rewards long-term investment.

I offer private online tutoring adapted to all levels of higher education:

🟥 Engineering Cycle • 🟥 Master's Degree • 🟥 Bachelor's Degree • 🟥 Preparatory Classes for the Grandes Écoles
🟥 Integrated preparatory courses • 🟥 DUT • 🟥 BTS • 🟥 Post-bac.
Which aim to:
🟡 Achieve excellent grades with guaranteed results thanks to a proven method.
🟡 Reinforcing fundamental concepts and acquiring practical tips.
🟡 Complete preparation for tutorials, homework, tests, exams and national competitions.
🟡 Specialized support for academic and industrial projects

🟢 Working method: an effective 3-step method
course review and summary
• drafting a complete summary sheet
· focus on important elements, key formulas and tips
• Fast and efficient revision support
progressive training
• Typical exercises and direct application
• problems of in-depth study
· complex synthesis exercises
optimal preparation
• Specific methods for each type of assessment
• Strategies for tests, exams and competitions
• simulations of tests under real-world conditions

I use remote platforms such as:
Zoom, Teams, Google Meet...
I use a graphics tablet as a tool.

Among the courses I teach:
🟢 Solid mechanics;
🟢 The mechanics of the point;
🟢 Strength of materials (SOM);
🟢 Continuum mechanics (CM);
🟢 Elasticity;
🟢 Structural calculations using finite element (FE);
🟢 Reinforced concrete structural calculations;
🟢 The vibration continues;
🟢 Fluid mechanics;
🟢 Hydraulics;
🟢 Thermodynamics;
🟢 Heat transfer;
🟢 Industrial design;
🟢 Aeronautics;
🟢 Machine components;
🟢 The materials;
🟢 Metallurgy;
🟢 Mechanical manufacturing processes;
🟢 Metrology;
🟢 Servomechanisms and regulation.

I offer continuing education courses or industrial projects to be carried out using modeling and numerical simulation software, CAM and CAD:
🟢 Ansys;
🟢 Abaqus;
🟢 Catia;
🟢 SolidWorks

Anh

5.0

(6)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Youssef

5.0

(6)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Tim

5.0

(6)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

Ahmd

5.0

(6)

Engineering drawings are used to communicate design ideas and technical information to engineers and other professionals throughout the design process. An engineering drawing represents a complex three-dimensional object on a two-dimensional piece of paper or computer screen by a process called projection.

Oualid

5.0

(6)

I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs.
Homework help for Baccalaureate students.
preparation for the competition.
For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.

Francisco

5.0

(6)

With 7+ years' experience in education, I have coached over 50 students to improve their academic results and boost their confidence in math and physics.

My tutoring services always include a personalized plan for each student. This plan is established during the first session where I like to meet the student, better understand their difficulties and get to know their schedule.

In the first session, we will:

- Get to know each other.
- Understand the student's strengths and identify areas for improvement.
- Understand the student's needs and difficulties.
- Get to know the student's schedule.
- Create a tutoring plan

Typically, sessions take place as follows:
i. Theoretical review of complex concepts in simple terms
ii. Tips for solving problems
iii. Abundance of exercises from my databases (exams, exercises)

If you are interested in my services, please provide the following information when contacting me:

- School system (French Bac, Matu, IB, A-levels)
- Location of tutoring (or video tutoring if applicable)
- Number of sessions per week and preferred days and times of the week (this can also be discussed after the first session, if you prefer)

Check out my profile if you want to know more about me :)

See you soon,
Francisco

Mohamed

5.0

(6)

Hi,
I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success.

Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs.

Feel free to contact me for more information !

Yassmine

5.0

(6)

As a mechanical engineer, I offer tutoring in mathematics, physics and mechanical engineering, adapting each session to the specific needs of the student. My goal is to make these subjects clear and accessible while promoting understanding and practical application of concepts.

Reza

5.0

(6)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).
Key topics that I teach for this course include:
• Calculus: Differentiation & integration, Multivariable calculus
• Linear Algebra: Matrices, vectors, systems of equations, Eigenvalues and eigenvectors
• Differential Equations: First- and second-order ODEs, Laplace transforms
• Complex Numbers: Polar form, Euler’s formula
• Vector Calculus: Gradient, divergence, curl, Line and surface integrals
• Series & Transforms: Taylor series, Fourier series

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Ahmed

5.0

(6)

This course is intended for preparatory year university students and all majors that rely on the study of differential and integral calculus (Calculus 1 & 2), such as: engineering in all its branches, natural sciences, computer science, economics, and management, in addition to any field that requires a strong foundation in mathematics.

In this course, we will go through a step-by-step explanation of the concepts of differentiation and integration, starting with limits, derivatives, and their rules, then moving on to practical applications of differentiation, such as maximum rates of change and solving physical and engineering problems. Finally, we will discuss definite and indefinite integration and its various methods of calculation, with practical applications for areas, volumes, and solving equations.

The lessons are designed in a simple and streamlined style that helps students understand complex concepts easily, with a focus on practical training through solving exercises and questions similar to those found on university exams. Detailed explanations of common mistakes and practical tips are also provided for confidently passing Calculus and achieving outstanding results.

This course is not limited to simply solving problems, but rather aims to build a solid mathematical foundation that will enable the student to pursue his other university courses more easily.

Eng

5.0

(6)

All materials related to the Mechanical Engineering Department - training on machines and hydraulic and pneumatic circuit design programs - a mechanical engineer with a master's degree, teaching experience and extensive practical experience - the explanation will be easy and simplified and linked to the practical part so that the student benefits from the content