Translated by GoogleSee original

Calculus 1 & 2 for preparatory and university students

From 48 C$ /h

This course is aimed at preparatory year students and students in various disciplines that require the study of differential and integral calculus (Calculus 1 & 2), such as engineering, natural sciences, computer science, economics, and management.
We begin with the basics of terms, differentiation and its rules, then we move on to applications of differentiation, rates of change and extreme values, leading up to definite and indefinite integration and its various methods and applications in calculating areas and volumes and solving problems.
The lessons are presented in a simplified and progressive manner, with solved examples and exercises that simulate university exams, focusing on understanding concepts, avoiding common mistakes, and gaining skill and confidence in problem-solving.
The goal is to build a strong mathematical foundation that helps the student excel in Calculus and prepare effectively for advanced university courses.

Extra information

It is better to attend the lesson on a tablet rather than a computer.

Location

Online from Saudi Arabia

About Me

Are you looking for a tutor who can help you understand your subjects easily and boost your confidence? 👨‍🏫
I teach Mathematics, Chemistry, Physics, and English for all levels up to university. I offer lessons online or at home using modern methods and interactive techniques that make learning both fun and easy.

I also have extensive experience preparing students for the Saudi GAT (General Aptitude Test) in both Arabic and English, covering quantitative and verbal sections, with practical training in fast and accurate problem-solving strategies.

With me, you will learn through clear steps, simplified examples, and practical applications that help you achieve top results 🎯.

Education

I hold a Bachelor’s degree in Chemical Engineering from the University of Khartoum, graduating with Second Class Honours.
Throughout my academic journey, I have completed multiple courses in education and teaching, in addition to training programs in academic and professional coaching. This has enabled me to build a strong knowledge base in teaching methods and develop educational skills tailored to the diverse needs of students.

Experience / Qualifications

Algooru Platform – Online Private Tutoring (2019 – 2022)
Preparation for the General Aptitude Test (quantitative and verbal) and foundational support in Mathematics, English, and Science.

Private Tutoring (2019 – 2022)
Teaching quantitative and verbal aptitude, as well as Mathematics, English, Chemistry, and Physics.
Experienced in teaching Saudi, Sudanese, and International curricula through one-on-one tutoring sessions.

Ali Al-Sayyid Secondary School for Boys and Girls (2021 – 2022)
Taught Chemistry, Physics, Engineering Sciences, Mathematics, and English to high school students.

Arbab Al-Aqaid Primary School for Boys (2018)**
Taught Mathematics, Science, and English while achieving the educational objectives set by the administration.

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

Arabic

English

Skills

Computer engineering

Electrical engineering

Mechanical engineering

Reviews

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

دورة الاستعداد لاختبار القدرات العامة (GAT) – القسم الكمي باللغة الإنجليزية

48 C$ /h

يستهدف هذا الكورس الطلاب انترناشونال الذين يدرسون باللغة الإنجليزية ويستعدون لاختبار القدرات العامة (GAT)، مع التركيز على القسم الكمي، لبناء أساس رياضي قوي وتطوير مهارات التفكير المنطقي والتحليل الكمي.

نتدرج في شرح أهم المفاهيم الرياضية باللغة الإنجليزية، بما يشمل الحساب، والنسب والتناسب، والمعادلات، والهندسة، والإحصاء، والاحتمالات، والمسائل اللفظية، مع توضيح المصطلحات الرياضية الإنجليزية وطرق الحل السريعة والفعّالة.

تُقدَّم الدروس بأسلوب مبسّط ومتدرج، مع أمثلة محلولة وتدريبات تحاكي الاختبار، والتركيز على فهم أنماط الأسئلة، وتجنب الأخطاء الشائعة، وإدارة الوقت بكفاءة.

الهدف هو تمكين الطالب من فهم الأسئلة الرياضية باللغة الإنجليزية وحلها بثقة وسرعة، والاستعداد لتحقيق درجة متميزة في اختبار GAT.

GAT Exam Preparation – Quantitative Section (English)

48 C$ /h

This course is designed for international students studying in English who are preparing for the General Aptitude Test (GAT), with a focus on the Quantitative Section. It aims to build a strong mathematical foundation and develop essential quantitative reasoning and problem-solving skills.

The course covers key mathematical topics, including arithmetic, ratios and proportions, percentages, algebra, geometry, statistics, probability, sequences, and word problems, with an emphasis on efficient problem-solving techniques and time management.

Lessons are delivered in a clear, structured, and step-by-step approach, featuring worked examples and practice questions similar to those found on the actual exam. Special attention is given to mathematical terminology in English, common mistakes, and effective strategies for solving different question types.

The goal is to help students solve quantitative questions accurately and efficiently, build confidence, and achieve an excellent GAT score.

Youssef

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Haider

4.85

(13)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered in

✔ CAD (including CREO - SolidEdge - Inventor - NX - SolidWorks)
✔ FEM (including Ansys, CREO - SolidEdge - Inventor - NX - SolidWorks)
✔ CFD (including Ansys CFX & Fluent, OpenFoam, CREO)
✔ Energy theory
✔ Thermal theory
✔ Chemistry
✔ BQ NTG
✔ HQ technology
✔ Computer science
✔ Structural theory (TWL 1 to 3)
✔ Elastostatics
✔ Dynamics
✔ Materials science
✔ Steel construction

+ other subjects on request

When contacting us, please state your class/course of study/training and subject!

I am looking forward to hearing from you.

Adam

4.85

(13)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Gabby

4.85

(13)

Experienced Math, Physics and Engineering tutor for high school, IB and university courses. I enjoy encouraging high school and university students to find a passion for math, physics, and stem topics. I can help with homework problems, exam studying and learning content. I'm living in Palma, and am able to meet at the students home, or I have access to a work space near Placa d'Espana. I can also offer classes online. I obtained a degree in Mechanical Engineering from the University of British Columbia and achieved top marks. I love design, engineering and machining so can help with student's design or engineering related aspirations. Furthermore, I could support with engineering and science applications for university programs, and can provide insight into the university landscape in Canada. Over a year ago I moved to Palma from Canada to improve my Spanish and work as an mechanical engineer in the marine industry.

علاء

4.85

(13)

Principles of using visualization methods for geometric shapes, front, top, back, and side facades, with an explanation of drawing methods on paper, along with the use of appropriate tools for engineering drawing, for students of mechanical, architectural, and industrial engineering and all engineering disciplines that study the subject of engineering design and its principles. Designs for products of mechanical elements and components can be made to be ready for drawing through programs such as AutoCAD and then 3D printing to visualize the product and then manufacturing and production. The courses also contribute to understanding shapes and ways to deal with them with the required sizes and engineering details and the types of paper suitable for engineering drawing.

Ali

4.85

(13)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

Reza

4.85

(13)

This tutoring class is designed to support Mechanical Engineering students in mastering core concepts of thermodynamics. I cover key topics such as the First and Second Laws of Thermodynamics, energy conservation, entropy, thermodynamic cycles (Carnot, Rankine, Otto, Brayton), and the analysis of closed and open systems. Emphasis is placed on clear explanations, worked examples, and strategies for solving complex engineering problems.

Core Thermodynamics topics that I teach include:
• Basic Concepts: Systems (closed, open), properties, processes, and energy forms
• First Law of Thermodynamics: Energy conservation in closed and open systems
• Applications: turbines, compressors, nozzles, heat exchangers
• Properties of Substances: Phase changes, property tables, ideal gas law, P-v-T behavior
• Second Law of Thermodynamics: Heat engines, refrigerators, Carnot cycle, reversibility
• Entropy: Entropy changes, T-s diagrams, irreversibility
• Thermodynamic Cycles: Otto, Diesel, Rankine, Brayton, and vapor-compression cycles

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Pallavi

4.85

(13)

Learn Python with a structured, hands-on approach! Whether you are a absolute beginner looking to start coding, a student needing help with coursework, or a professional aiming to automate tasks, these lessons are tailored for you.What we will cover:
Core Fundamentals: Variables, loops, functions, and data structures.Object-Oriented Programming: Building reusable and clean code.Real-World Projects: Creating scripts, data analysis, or web scraping based on your goals.

Problem Solving: Learning how to debug and think like a programmer. Lessons are highly interactive. We will write code together from day one, and you will receive practical exercises after every session to build your confidence.

Test

4.85

(13)

You will learn how to develop websites with and without AI, as well as skills related to the software development sector such as programming, databases, different development methodologies, and writing technical specifications.

Mayank

4.85

(13)

In this 30-minute class, we will understand the two core components of a microprocessor: the ALU (Arithmetic Logic Unit) and the Control Unit. I will explain their structure, functions, and how they work together to execute instructions, using simple diagrams and practical examples. The goal is to build a clear understanding of how a microprocessor processes and controls data.

4.85

(13)

Learn PowerShell through practical, one-on-one training focused on real-world Windows administration.

This course is designed for IT professionals, system administrators, IT support technicians, and career changers who want to develop practical PowerShell skills for managing Windows Server, Active Directory, and Microsoft Exchange environments.

Topics Covered
PowerShell fundamentals and command structure

Working with PowerShell commands, cmdlets, parameters, and objects

Variables, operators, conditions, and loops

Working with files, folders, and Windows processes

Managing Windows Server with PowerShell

Creating and managing Active Directory users, groups, and computers

Active Directory administration and automation

Bulk user and account management

Searching and filtering Active Directory objects

PowerShell for Microsoft Exchange Online

PowerShell for on-premises Exchange Server

Managing Microsoft 365 and Exchange objects with PowerShell

Writing reusable PowerShell scripts

Error handling and troubleshooting

Automating repetitive administrative tasks

Practical scripting exercises based on real IT administration scenarios

Who Is This Training For?
This training is suitable for:

IT Support and Help Desk professionals

Desktop Support technicians

Windows Administrators

System Administrators

Microsoft 365 Administrators

Network/IT professionals

Students preparing for an IT career

Career changers entering the IT field

Anyone who wants to automate Windows administration tasks

No advanced programming background is required. We can start with the fundamentals and progress toward practical administration and automation.

Lessons are one-on-one and customized to your current knowledge and career goals, with an emphasis on hands-on exercises rather than theory alone.

If your goal is to learn PowerShell for Windows Server, Active Directory, Microsoft 365, or Exchange administration, this training can be tailored specifically to your needs.

Hakan

4.85

(13)

I offer clear and structured Calculus I and Calculus II lessons for university students, particularly those studying engineering, science, and other STEM subjects.

My aim is not only to help you solve problems, but also to understand the mathematical ideas behind the methods. I explain concepts step by step and connect calculus to practical applications in physics and engineering whenever useful.

Topics can include:

• Functions, limits, and continuity
• Derivatives and differentiation techniques
• Applications of derivatives and optimization
• Integrals and integration techniques
• Applications of definite integrals
• Sequences and series
• Parametric and polar functions
• Introduction to multivariable calculus
• Partial derivatives
• Engineering applications of calculus

Lessons can be adapted to your individual goals, whether you need help understanding a difficult topic, preparing for an exam, reviewing a course, or solving practice problems.

As a mechanical engineer with university-level teaching and laboratory experience, I regularly work with mathematics in subjects such as mechanics, thermodynamics, fluid mechanics, heat transfer, and computational engineering. This allows me to explain not only how a mathematical method works, but also why it is useful.

Lessons are interactive and tailored to your current level. Students are encouraged to ask questions throughout the lesson.

Hend

4.85

(13)

In this lesson we cover the basics of statics, the science that studies stationary objects under the influence of different forces, and is the cornerstone of engineering subjects such as mechanics and construction.
What you will learn in this lesson:
• The concept of power, its types, and methods of representing it
• Analyzing forces into their components
Conditions for equilibrium of bodies
• Solve practical examples step by step
The lesson is suitable for engineering students of all specializations, and for anyone who wishes to build a strong understanding of the material before moving on to advanced subjects.

Mohamed

4.85

(13)

Teaching electrical engineering online to university students

I offer online private lessons for engineering college students, focusing on simplifying engineering concepts, solving problems step by step, and practicing exam and project questions.

I help students understand the material from the ground up instead of relying on memorization, using practical examples, illustrations and simulations when needed.

The subjects I teach include:

Electrical Circuits
Electrical Machines
- Electrical Power Systems
Power System Protection
Electrical Installation & Distribution
Energy Conversion
Renewable Energy Systems
High Voltage and High Voltage Engineering
- Transformer stations and substations
- Electronics and basic electronic circuits
- Basic Control Systems
Engineering mathematics used in electrical engineering

During the lecture, I focus on:

1. Explain the concept in a simple and organized way.
2. Derivation of important laws and equations.
3. Solve various examples and problems step by step.
4. Training the student on exam questions.
5. Explaining common mistakes and how to avoid them.
6. Use MATLAB/Simulink, ETAP and simulation when needed.
7. A comprehensive review before tests and exams.

Teaching method:

- Individual lectures or small online groups.
- Live and interactive explanation via Zoom or Google Meet.
- Sharing the screen and writing on the electronic whiteboard.
- The possibility of recording the lecture as agreed.
- Providing summaries and practice problems for review.

The goal: for the student to be able to understand the material, solve problems on their own, and prepare confidently for exams and engineering projects.