Reinforced Concrete Members design according to Eurocode

From 55.99 C$ /h

This course provides a comprehensive introduction to the design of reinforced concrete structural elements according to Eurocode 2 (EN 1992-1-1). It is intended for students and professionals in structural and civil engineering who want to develop a solid understanding of concrete design in line with European standards.

The course covers the fundamental principles of limit state design, material properties, and practical design procedures for beams, slabs, columns, and foundations. Emphasis is placed on correct application of Eurocode 2 provisions, including partial safety factors, load combinations, and serviceability checks. Students will gain hands-on experience through detailed design examples, reinforcement detailing, and structural drawings.

Key Topics:

Material properties and partial safety factors
Ultimate and serviceability limit states
Design of beams for bending, shear, and deflection
Design of one-way and two-way slabs
Column design (axial, uniaxial, and biaxial loading)
Design of pad footings and strip foundations
Crack width control and deflection checks
Reinforcement anchorage, laps, and detailing rules
Use of Eurocode 2 design aids and practical calculation methods
Learning Outcomes:
By the end of the course, learners will be able to:

Understand and apply Eurocode 2 design principles to reinforced concrete structures
Design structural elements including beams, slabs, columns, and foundations
Perform checks for serviceability and durability
Prepare reinforcement layouts and documentation in line with Eurocode 2 requirements

Location

Online from United Kingdom

About Me

As a dedicated tutor with a deep passion for structural engineering, I aim to simplify complex concepts and make them accessible to learners of all levels. With a strong foundation in engineering principles and years of experience, I’m committed to helping students understand the core fundamentals of structural analysis, design, and problem-solving. My teaching approach focuses on clarity, practical application, and fostering a genuine interest in the subject. Whether you're preparing for exams or looking to enhance your knowledge, I am here to guide you through each step with patience and enthusiasm.

Education

- Teesside University, United Kingdom
(September 2020 -onward)
• PhD in Civil Engineering (onward, predicted 2026)
• Master of Engineering in Civil Engineering (completed June 2023)
• Bachelor of Civil Engineering (completed June 2022)
- University of Damascus, Syria
(2007 - 2012)
• Bachelor of Civil Engineering (4 out of 5 years completed)
- The Ministry of Education, Damascus, Syria
(2005 - 2007)
• General secondary school certificate

Experience / Qualifications

- Associate Lecturer, Teesside University, United Kingdom
(February 2023 -onward)
Achievements and responsibilities:
• Demonstrate the lecture to the students.
• Provide support and assistance to learners during lectures.
- Teaching Assistant, Gateshead Council, United Kingdom
(February 2016 -September 2017)
Achievements and responsibilities:
• Supporting the learning and progression of learners.
• Encouraging learner participation and development
• To identify and overcome participants’ barriers to learning.
- Teacher, Al Rawafid School, Beirut, Lebanon
(January 2013 – November 2015)
Achievements and responsibilities:
• Teaching Mathematics and Physics to 16-18-year-olds
• Taught around 5 classes which included approximately 300 children
• One-to-one teaching support
• Developing training courses
• Devising lesson plans to follow the syllabus.

Age

Adults (18-64 years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Arabic

Skills

Structural engineering

Civil engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Steel Structural Elements Design According to Eurocode

55.99 C$ /h

Need Help with Steel Structural Design to Eurocode? I’ve got you covered
book your session today and strengthen your steel design skills.
Are you a civil or structural engineering student struggling with Eurocode 3? Or a recent graduate aiming to feel confident in steel structure design?
Join my class on Steel Structural Design to Eurocode (EC3) – a practical and student-focused course designed to help you succeed.
You’ll learn how to:
Design steel beams, columns, and connections to Eurocode 3
Understand load paths and stability requirements
Apply real-world examples to structural design problems
Prepare for coursework, exams, or industry work with confidence
Why choose my class?
I’m a structural engineering tutor with a passion for simplifying complex design concepts. My sessions are hands-on, practical, and tailored to your learning pace.
Perfect for:
Civil/Structural Engineering students
Recent graduates preparing for industry
Anyone needing guidance through EC3 design calculations
Let’s take the stress out of steel design – and turn it into a skill you can rely on.

Haider

5.0

(6)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered in

✔ CAD (including CREO - SolidEdge - Inventor - NX - SolidWorks)
✔ FEM (including Ansys, CREO - SolidEdge - Inventor - NX - SolidWorks)
✔ CFD (including Ansys CFX & Fluent, OpenFoam, CREO)
✔ Energy theory
✔ Thermal theory
✔ Chemistry
✔ BQ NTG
✔ HQ technology
✔ Computer science
✔ Structural theory (TWL 1 to 3)
✔ Elastostatics
✔ Dynamics
✔ Materials science
✔ Steel construction

+ other subjects on request

When contacting us, please state your class/course of study/training and subject!

I am looking forward to hearing from you.

Manish

5.0

(6)

Need help in
Strength of materials?
Roadways?
Concrete?
Fluid?
Static?
Physics?
Just contact me
I will give service to each individual.
So you can contact me through this and you will pass the final for sure. Else full refund. I only trust on work

Saeed

5.0

(6)

I am an expert civil engineer with two years of professional experience. I worked on various small and large projects regarding Buildings, Roads, Bridges, Flyovers, Water Tanks etc. I have expertise in the following Subjects and Software of Civil Engineering. Structural Analysis and Design Reinforced Concrete Design Hydraulics and Hydrology Geometric and Pavement Design Soil mechanics and Foundation Engineering Steel Structure Design Engineering mechanics (Statics) SOFTWARE: AUTOCAD EPANET RISA 2D-3D PRIMAVERA MS OFFICE ETABS CSI SAFE STAAD PRO ABAQUS HEC-RAS SAP2000

Reza

5.0

(6)

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB.

Some of the finite element modeling and numerical simulations I have worked on include:
- Multiscale finite element modeling for fatigue crack propagation in porous materials.
- Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper].
- Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles.
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials.
- Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions.

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Khaldoun

5.0

(6)

Are you interested in mastering structural analysis software like ETABS and Robot Structural Analysis? Whether you're a student, a recent graduate, or a professional looking to enhance your skills, my classes are designed for you!

About Me:
I am a freelance structural engineer with extensive experience in analyzing and designing various projects, including both concrete and steel structures. I have successfully collaborated on university projects, bridging the gap between theoretical knowledge and practical application. My goal is to empower you with the skills and knowledge needed to excel in the field of structural engineering.

Course Outline:
Introduction to Structural Analysis:
Fundamentals of structural engineering
Overview of software applications in design

ETABS:
• ETABS is one of the premier software applications for structural analysis and design, tailored specifically for building systems. In our ETABS module, you'll gain a comprehensive understanding of its powerful capabilities. We will cover the essential features, including how to create complex models of multi-story buildings, apply various loads, and analyze their responses to dynamic forces such as wind and earthquakes. You will learn best practices for reinforcing concrete structures and optimizing designs for both strength and serviceability. Through hands-on projects, you will become proficient in interpreting analytical results, generating design reports, and ensuring compliance with international design codes. By the end of this segment, you will have the ability to confidently utilize ETABS for real-world engineering challenges.

Robot Structural Analysis:
• Robot Structural Analysis is a robust software solution that provides advanced simulation capabilities for structural engineers tackling intricate design challenges. In our Robot module, you'll explore the software's extensive tools for analyzing a wide range of structures, from simple beams to complex frames and trusses. We will delve into advanced analysis methods, including linear and non-linear static analysis, dynamic response analysis, and more. You will learn how to effectively use load combinations, perform detailed design checks for both concrete and steel structures, and evaluate the structural integrity under various loading conditions. This module emphasizes the importance of optimal performance and efficiency in design, equipping you with the knowledge to use Robot Structural Analysis for sophisticated project requirements. Real-life case studies will provide valuable context and enhance your practical skills.

Concrete and Steel Design:
Principles of design for both materials
Practical case studies and projects

Freelancing Tips:
Managing client projects
Best practices for successful freelancing in structural engineering

Course Goals and Outcomes
Within just 10 sessions, you will develop the necessary skills to work with either ETABS or Robot Structural Analysis, enabling you to take on real-world projects confidently. By the end of the course, you will be well-prepared to apply your knowledge and expertise in practical engineering scenarios

Why Choose My Classes?
Hands-on experience with real-world projects
Interactive learning environment
Personalized guidance tailored to your learning pace

Mustafa

5.0

(6)

All the classes of mine include flexible hours depending on requests from tuition-takers. Every session takes one hour with interactive learning techniques. The primary aim of them is to ensure the tuition takers satisfy with the outcomes in the end.

Abdeer

5.0

(6)

Graduated from the external aggregation in Industrial Sciences and holder of a doctorate in mechanical engineering, I offer courses adapted for students of technical schools and faculties. My expertise allows me to offer quality support to master the fundamental and advanced concepts of the following disciplines:

Courses offered:
🔧 Solid mechanics: Analysis and understanding of mechanical phenomena.
📐 Rational mechanics: Resolution of mechanical systems using rigorous approaches.
⚙️ Strength of Materials (RDM) and Mechanical Materials (MMC): Understanding the mechanical properties of structures and materials.
🏗️ Mechanical construction: Design, dimensioning, and production of mechanical systems.
💻 Industrial computing: Programming and automation in an industrial context.

Why choose my courses?
✔️ Clear and structured teaching methodology.
✔️ Practical and theoretical experiences adapted to academic expectations.
✔️ Preparation for exams, competitions, and technical projects.

Course format:

Target audience: Students from leading universities, technical faculties, and engineering training centers.
Organization: Individual or group courses, in person or online.
Teaching materials: Corrected exercises, detailed summaries, and practical simulations.

Abbas

5.0

(6)

My courses are designed to help students of all levels, from beginner to advanced, achieve their academic goals. Whether you need help with basic concepts or want to deepen your understanding of more complex topics, I am here to guide you.

In each session, we will work together to identify your strengths and weaknesses, set achievable goals, and develop a personalized plan to improve your skills. My teaching approach is student-centered, meaning that I adapt my methods to fit your learning style and pace.

Isha

5.0

(6)

Aeronautics is an incredibly captivating and cutting-edge field that has the power to inspire students to pursue their studies in aerospace engineering. It offers a fascinating blend of science and technology, allowing students to explore the principles of flight, aerodynamics, and aircraft design.

With aeronautics, students can venture into the realm of space exploration, unmanned aerial vehicles, supersonic flight, and future air transportation technologies like electric aircraft and vertical take-off and landing vehicles.

The field of aeronautics presents endless opportunities for innovation and pushing the boundaries of what's possible in the skies, making it an enticing and rewarding area of study for aspiring aerospace enthusiasts.

TOPICS COVERED:

Aerodynamics: The study of airflow around aircraft and how it affects their performance

Aircraft Structures: Understanding the design and analysis of aircraft components for safety and durability.

Propulsion Systems: Learning about different propulsion technologies, such as jet engines and propellers.

Flight Mechanics: Analyzing the dynamics and control of aircraft during flight.

Aircraft Design: The process of conceptualizing, modeling, and optimizing aircraft configurations.

Aircraft Stability and Control: Understanding the stability and control characteristics of aircraft during various maneuvers.

Aerospace Materials: Learning about materials used in aircraft construction and their properties.

Unmanned Aerial Systems (UAS): Understanding the design and operation of drones and other unmanned aircraft.

Baia

5.0

(6)

Want to learn Revit and AutoCAD for engineering and BIM projects?

This course is designed for beginners, university students, and aspiring engineers who want to develop practical skills in electrical design, BIM workflows, and technical drafting.

No previous experience is required.

Students can also receive help with:
- university assignments
- BIM and Revit projects
- technical drawings
- portfolio development
- internship preparation

Lessons are adapted to the student’s level and learning goals.

Mohamed

5.0

(6)

Elevate your civil engineering skills with personalized tutoring in building and road construction from an experienced civil engineer. This course is designed for students and professionals who want to excel in the essential areas of civil engineering, focusing on the intricacies of constructing buildings and roads.

Comprehensive Building Focus: Understand the principles and practices of building construction, including site analysis, structural design, materials selection, and construction methods.
-Expert Road Construction: Learn the detailed processes involved in road construction, from planning and design to pavement technology and maintenance.
- Real-World Experience: Gain practical insights from a civil engineer with hands-on experience in building and road construction projects.
- Customized Learning: Tailor your learning journey to your needs, whether you are a beginner or seeking advanced knowledge in specific areas of construction.
- Interactive Sessions: Engage in one-on-one or small group sessions with detailed case studies, hands-on projects, and interactive problem-solving exercises.
- Professional Development: Enhance your resume and career prospects with targeted skills in high-demand areas of civil engineering.

Additional Information for Students:

- Course Structure: Flexible scheduling to fit your availability, with options for both online and in-person sessions.
- Resource Materials:Access to exclusive course materials, including industry reports, technical papers, and design software tutorials.
- Networking Opportunities: Connect with other students and professionals in the building and road construction industry through our community forums and events.
- Certification: Receive a certificate of completion to validate your expertise and boost your professional credentials.
- Continued Support: Benefit from ongoing support and mentorship, even after you complete the course, to help you apply your new skills in

Ali

5.0

(6)

📐 Civil & Structural Engineering Tutoring – Master Statics & Mechanics of Materials**
Are you a student struggling with the foundational subjects of civil and structural engineering? I offer one-on-one tutoring designed to help you confidently tackle core topics like **Statics** and **Mechanics of Materials**.

With a strong background and proven proficiency in these subjects, I provide clear explanations, step-by-step problem-solving strategies, and personalized guidance tailored to your course and learning style. Whether you're preparing for an exam, working through tough assignments, or just need concepts clarified, I’m here to help you build a solid understanding.

**Topics Covered Include:**

* Equilibrium of forces and moments
* Free-body diagrams
* Trusses, frames, and beams
* Internal forces (shear and moment diagrams)
* Stress and strain analysis
* Axial, torsional, bending, and shear stresses
* Mechanical properties of materials
* Mohr’s Circle, deflection, and more

**Who It's For:**

* Civil & Structural Engineering undergrads
* Students in related engineering programs taking statics/mechanics courses
* Anyone needing a refresher on fundamental mechanics

**Session Format:**

* Online (via Zoom, Teams, or your preferred platform)
* Flexible scheduling
* Homework help, exam prep, or concept reviews

Let’s simplify the complex and get you confident in your courses!

Désiré

5.0

(6)

In this era, it is important to master the computer aided design softwares in order to ensure interoperability with other actors of our domain. Hence attending a class in the mastery of this skill will make you ready to adapt yourself in the professional milieu.
This program is open to civil engineering students who aspire to be structural engineers and other professionals or beginners who wish to freshen up or develop another skill.

Pritam

5.0

(6)

Equilibrium of rigid bodies is one of the topics which can be described as the foundation of the structural analysis for the superstructures. So, in this topic, the equilibrium conditions will be studied by us for the analysis of the two-dimensional structures. The application of those conditions will be studied as well.

Wilmer

5.0

(6)

My goal is to assist high school students in learning Spanish as a second language, enabling them to communicate clearly—both orally and in writing. Additionally, I aim to share my university-level knowledge of mathematics and physics with my students.