Facility Planning and facility layout, the decision of facility planning

From 16 C$ /h

Facility Planning is composed of facility location as a decision for choosing the best location to minimize the total cost of transportation and the other decpline is the location layout and the different improvement of layout to minimize cost

Extra information

Having a special knowledge about the measurement of distance and some basics of mathematics

Location

Online from Egypt

About Me

Welcome
I am Dr. Ghada, PhD in Engineering
I have a great passion for teaching and I have taught for 20 years, basic engineering subjects such as statistics and operations research. I also have experience teaching mathematics to different grades up to the general year.

Education

Zagazig University
Industrial Engineering
PhD in Industrial Engineering
MSc in Industrial Engineering
BSc in Mechanical Engineering, Department of Industrial Engineering and Production
High School Diploma from the Arab Republic of Egypt

Experience / Qualifications

20 years of university teaching experience in statistics, operations research, production planning, and maintenance.
6 years of experience in online teaching.

Age

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

90 minutes

120 minutes

The class is taught in

English

Arabic

Skills

Industrial engineering

Product management

Mechanical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Teaching mathematics at the secondary level, teaching statistics at the secondary, university and postgraduate levels

13 C$ /h

Teaching statistics starting with studying the sample space of a random experiment and its various operations, as well as studying probabilities and their various theories, as well as studying random variables (continuous or discrete) and functions expressing random variables, as well as studying hypotheses and their various conditions, as requested and determining the content required to be taught to students.

Hypothesis Test for single Sample to estimate and define the population parameters such as mean and standard deviation

14 C$ /h

The hypothesis test is an extended for estimation of population parameters and it test the null hypothesis versus to an alternative hypothesis to determine the accepted and rejection rejoin to claim the null hypothesis, these for a single population may be applied for any discipline of engineering

Haider

5.0

(8)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered (online) in

✔ Math

✔ Physics

✔ Technical mechanics (statics, strength theory, kinematics)

✔Technical drawing

✔ Machine elements

✔ Thermodynamics

✔ Fluid dynamics

+ other subjects on request

When contacting please
Class / study / training and subject
notify!

I am looking forward to hearing from you.

Alonso

5.0

(8)

I am a Full Professor of Mechanical Engineering with 30 years of experience in areas such as Strength of Materials, Stability, Physics (Kinematics and Dynamics), Statics, Elasticity, Solid Mechanics, Machine Elements, Stress Analysis, Structures and Advanced Materials Mechanics . I emphasize teaching through problem solving and practical applications.
The Strength of Materials classes include topics such as: Stress analysis. Axial load, bending, Torsion, Transverse load, Combined stresses, Stress transformation, Energy methods, Calculation of deflections in beams, statically indeterminate problems, buckling, shear center, compound bending and asymmetric bending, Castigliano's theorem, Mohr's method , Virtual work, Creep and Fracture Criteria, etc.

Reza

5.0

(8)

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB.

Some of the finite element modeling and numerical simulations I have worked on include:
- Multiscale finite element modeling for fatigue crack propagation in porous materials.
- Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper].
- Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles.
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials.
- Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions.

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Adam

5.0

(8)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Gabby

5.0

(8)

Experienced Math, Physics and Engineering tutor for high school, IB and university courses. I enjoy encouraging high school and university students to find a passion for math, physics, and stem topics. I can help with homework problems, exam studying and learning content. I'm living in Palma, and am able to meet at the students home, or I have access to a work space near Placa d'Espana. I can also offer classes online. I obtained a degree in Mechanical Engineering from the University of British Columbia and achieved top marks. I love design, engineering and machining so can help with student's design or engineering related aspirations. Furthermore, I could support with engineering and science applications for university programs, and can provide insight into the university landscape in Canada. Over a year ago I moved to Palma from Canada to improve my Spanish and work as an mechanical engineer in the marine industry.

Tim

5.0

(8)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

Rayane

5.0

(8)

Dynamics is a branch of physics and engineering mechanics that studies the motion of objects and systems under the influence of forces. In this course, students delve into the principles governing the behavior of particles and rigid bodies in motion. Topics covered include kinematics, which describes the motion without regard to its causes, and kinetics, which focuses on the forces causing the motion. Students learn Newton's laws of motion, the principles of work and energy, and the concepts of impulse and momentum. Additionally, they explore rotational motion, including angular velocity, angular acceleration, and moments of inertia. Through theoretical study and practical applications, students develop the ability to analyze and predict the motion of objects and systems, essential for fields such as mechanical engineering, aerospace engineering, and physics.

Mohamed

5.0

(8)

Hi,
I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success.

Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs.

Feel free to contact me for more information !

Ahmd

5.0

(8)

Mechanics of materials (or strength of materials) is a branch of engineering that analyzes the behavior of solid objects subject to various loads, focusing on deformation, stress, strain, and failure. It determines the internal resistance of components (e.g., beams, columns, shafts) to ensure structural safety. Key concepts include elasticity, plasticity, torsion, bending, and material stress-strain relationships.

Abdelmalek

5.0

(8)

- Modbus Protocol Introduction
- Modbus Frame Structure & Byte Analysis
- Modbus Exception Handling & Error Codes

Each module in this series is structured with core learning content followed by two mandatory practical components:
Challenge: A hands-on troubleshooting or design scenario to test your practical skills.
Audit: A checklist and verification quiz to ensure full mastery before moving to the next section.

Youssef

5.0

(8)

Hello,
Welcome to my online interactive Solidworks design crash course.
In this course you'll learn everything you need to start your journey with solidworks.
You'll learn:
Sketching.
Modelling.
Assembling.
Working Drawings.
After this course you'll be able to continue on your own with no issues

يحيى

5.0

(8)

Lesson title:
General Physics for University Students (Physics 101 & 102) - The Complete Guide to Mastering Concepts, Solving Complex Problems, and Guaranteeing A+ Exams

Detailed lesson description:
Do you feel that the general physics course is an obstacle to your academic achievement? Do you find it difficult to connect theoretical laws and apply them to complex exam problems in English? Do you suffer from time constraints during exams or difficulty in extracting data correctly?

Don't worry! This comprehensive and intensive course is specifically designed to be your first and complete reference for passing the General Physics I & II courses with the highest distinction (A+), and turning physics from a source of anxiety into a strength in your GPA.

---

First: Topics covered in the General Physics 1 course (Physics 101 - Mechanics and Heat):

1. Vectors and Physical Quantities:
Understanding scalar and vector quantities and their applications.
- Adding and subtracting vectors structurally and computationally (Vector Addition & Components).
- Standard multiplication and cross product (Dot Product & Cross Product) and their direct uses.

2. Movement in one dimension and two dimensions (Kinematics in 1D & 2D):
- Equations of motion with constant acceleration.
- Free Fall & Projectile Motion.
Uniform Circular Motion and Determination of Acquired Acceleration Directions.

3. Newton's Laws of Motion and their applications:
- Newton's first, second and third laws and the formulation of the free-body diagram.
- Applying forces to different axes and dismantling the vehicles.
- Dealing with static and kinetic friction forces, inclined surfaces, and suspended masses.

4. Work, Energy & Conservation of Energy:
- Calculating the work done by constant and variable forces.
- Kinetic and Potential Energy.
- The principle of conservation of mechanical energy and its applications in the presence and absence of friction.

5. Linear Momentum & Collisions:
- Definition of momentum and calculation of impulse (Momentum & Impulse).
- Elastic and inelastic collisions in one dimension and two dimensions (Elastic & Inelastic Collisions).
- Calculating the center of mass for systems and particle systems.

6. Rotational Motion and Torque:
- Speed, angular acceleration, and the relationship between them and linear quantities.
- Bending moment, shear moment, and inertia moment.
- Applying Newton’s second law to rotational motion and the conservation of angular momentum.

---

Second: Topics covered in the General Physics 2 course (Physics 102 - Electricity and Magnetism):

1. Electric Charge and Coulomb's Law:
- Properties of electric charges and the laws of attraction and repulsion.
- Calculating the net electric force resulting from a group of point charges (Superposition Principle).

2. Electric Field and Gauss's Law:
- Calculating the electric field strength for point charges and continuous charge distributions.
- Electric flux and applications of Digges' law to spherical, cylindrical and planar surfaces.

3. Electrical Potential and Potential Energy:
- The difference in electrical potential and the work done to move the charges.
- Calculating the electrical potential resulting from the different distributions of conductive and insulating surfaces.

4. Capacitors and Dielectrics:
- Capacitor capacity and methods of connecting capacitors in series and parallel (Series & Parallel Capacitors).
- Energy stored in the electric field and the effect of introducing dielectric materials on capacitance and voltage.

5. Electric current and electrical circuits (Current, Resistance & DC Circuits):
- Ohm's Law and the difference between resistance and resistivity.
- Analyzing complex electrical circuits using Kirchhoff's Voltage & Current Laws.
- Capacitor charging and discharging circuits (RC Circuits).

6. Magnetic Field and Magnetic Forces:
- The magnetic force acting on moving charges and wires through which a current flows (Lorentz Force).
- The movement of charges in uniform magnetic fields.
- Biot-Savart Law and Ampere's Law for calculating magnetic fields.

---

Advantages of the teaching method and services provided in this course:

* Simplifying and deconstructing concepts: Transforming complex laws and dry theories into simplified ideas explained in Arabic while maintaining complete directness and professionalism in dealing with English terminology.
* Exam-style training: Solving hundreds of problems and concepts ranging from beginner to advanced levels and levels for outstanding students.
* Solving Past Papers: A comprehensive review of past years’ questions from various universities and coverage of midterm and final exam concepts.
Overcoming the obstacle of multiple choice (MCQs): Introducing critical thinking strategies, quick problem-solving, and techniques for eliminating incorrect answers to deal with time pressure in electronic and paper tests.
* Support and follow-up: Answering student inquiries, explaining school and university assignments (Assignments & Homeworks), clarifying weaknesses and addressing them immediately.

Who is this course for?
This course is aimed at all first and second year students in engineering colleges (mechanical, electrical, civil, aviation, computer), science college students (physics, mathematics, chemistry), technological and technical college students, and every student who seeks to break the barrier of fear of physics and reach the top by obtaining the highest grade.

Keywords (Tags):
Physics 101, Physics 102, General Physics, University Physics, Physics 101, Physics 102, Mechanics, Electricity and Magnetism, Engineering, University, Physics Exams, Physics Problem Solving, Past Papers, Calculus-based Physics, Coulomb, Newton, Kirchhoff, Diving, Piots Savar, EmSAT, Physics Tests, University Physics Explanation, Physics Questions and Answers, Physics Homework, General Physics I, General Physics II

Patricien

5.0

(8)

Master the complexities of Liquid Rocket Engine (LRE) design and analysis in this comprehensive, engineering-focused course. Led by an experienced aerospace engineer, this class breaks down advanced propulsion concepts into structured, practical lessons designed to build real-world design skills. You will dive deep into foundational propulsion topics, including thermodynamic cycles, injector configurations, and combustion element behavior. The course also features dedicated modules on turbomachinery, covering centrifugal pumps, impellers, inducers, and turbines. To bridge theory with industry practice, you will learn how to perform high-fidelity Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) specifically for rocket injectors and turbopump components. Additionally, you will master advanced 3D CAD design techniques using industry-standard software like SolidWorks and CATIA V5. Whether you are an engineering student or a practicing professional, this course will provide you with the exact tools needed to analyze and design liquid rocket components from scratch.

Hakan

5.0

(8)

I offer clear and structured Calculus I and Calculus II lessons for university students, particularly those studying engineering, science, and other STEM subjects.

My aim is not only to help you solve problems, but also to understand the mathematical ideas behind the methods. I explain concepts step by step and connect calculus to practical applications in physics and engineering whenever useful.

Topics can include:

• Functions, limits, and continuity
• Derivatives and differentiation techniques
• Applications of derivatives and optimization
• Integrals and integration techniques
• Applications of definite integrals
• Sequences and series
• Parametric and polar functions
• Introduction to multivariable calculus
• Partial derivatives
• Engineering applications of calculus

Lessons can be adapted to your individual goals, whether you need help understanding a difficult topic, preparing for an exam, reviewing a course, or solving practice problems.

As a mechanical engineer with university-level teaching and laboratory experience, I regularly work with mathematics in subjects such as mechanics, thermodynamics, fluid mechanics, heat transfer, and computational engineering. This allows me to explain not only how a mathematical method works, but also why it is useful.

Lessons are interactive and tailored to your current level. Students are encouraged to ask questions throughout the lesson.

Hend

5.0

(8)

In this lesson we cover the basics of statics, the science that studies stationary objects under the influence of different forces, and is the cornerstone of engineering subjects such as mechanics and construction.
What you will learn in this lesson:
• The concept of power, its types, and methods of representing it
• Analyzing forces into their components
Conditions for equilibrium of bodies
• Solve practical examples step by step
The lesson is suitable for engineering students of all specializations, and for anyone who wishes to build a strong understanding of the material before moving on to advanced subjects.