Translated by GoogleSee original

Structural mechanics for science and technology (BTS - Cycle Ing - M)

From 37 C$ /h

Hello !
This is a training pack concerning the analysis and calculation of structures, provided mainly within scientific and technical training of the engineering type, LMD and BTS relating to mechanical engineering and/or civil engineering. This is a set of training sessions which aim to provide all the knowledge and skills and know-how relating to the practical study of mechanical systems of the structural type, in particular hyperstatic structures and to provide a wealth of methods allowing to apprehend all types of structures.

On the program (although not limited):

1 - Reminders of RDM on the calculation of displacements;
2 - Bresse method;
2 - Energetics, method of forces;
3 - Three-moment method (Clapeyron method);
4 - Hearth method;
5 - Displacement method 1;
6 - Displacement method 2;
7 - Hardy-Cross method;
8 - Calculation of lines of influence.

Extra information

Provide sheets of paper, pens, a ruler and a calculator for possible note taking and problem solving.

Location

Online from Morocco

About Me

Hi there,

Civil engineer, building engineering and structural engineering - EHTP;
Undergraduate Professor of engineering mechanics, mechanical engineering - UM6P;
Mechanical engineering, structural engineering and structural mechanics enthusiast and professional;
Fields of interest include applied physics, engineering mechanics (cf.CPGE), classical mechanics, applied mechanics, mechanical engineering, structural engineering, structural mechanics and civil engineering.

Education

2022-Present : PhD student in structural and computational mechanics - UM6P
2021-2022 : Undegraduate professor certification, engineering mechanics and ME - UM6P
2017-2020 : Engineering degree, Civil and structural engineering - EHTP

Experience / Qualifications

Structural Engineer;
Structural and applied mechanics consulting;
Mechanics teacher and PhD student at UM6P;
Engineering mechanics instructor.

Age

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Intermediate

Advanced

Duration

60 minutes

90 minutes

120 minutes

The class is taught in

French

English

Arabic

Skills

Engineering

Mechanical engineering

Civil engineering

Reviews

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Mechanics of Continuous Media for science and technology (BTS - Cycle Ing - M)

37 C$ /h

Hello !
This is a training pack concerning the MMC and the theory of elasticity, provided mainly within scientific and technical training of the engineering type, LMD and BTS relating to mechanical engineering and/or civil engineering. This is a set of training sessions that aim to provide all the knowledge and skills relating to the fundamental understanding of the behavior of any deformable mechanical system and then allows you to extend it to the case. solids in their specific cases.

On the program (although not limited):

1 - Tensor calculation, reminders of mathematics;
2 - Kinematics of the continuous medium;
3 - Deformations of a continuous medium;
4 - Mechanical stresses in a continuous medium;
5 - Mohr circles and stress transformation;
6 - Behavioral laws and isotropic linear elasticity;
7 - Resolution of elasticity problems in displacements and stresses;
8 - Plane elasticity, Airy problems;
9 - Energetics of continuous media and variational methods;
10 - Application: Extension on non-deformable solids;
11 - Application: Extension on beams and plates.

Industrial Sciences for Engineers (CPGE - L GM/GE)

37 C$ /h

Hello !
This training pack is specially designed for students in preparatory classes for grandes écoles, offering in-depth expertise in the key areas of solid mechanics, automation and systems analysis through the use of SysML.

On the program (non-limiting):

1-Solid Mechanics: Exploration of the concepts of kinematics, statics, kinetics, energy and dynamics of solids/systems of non-deformable solids.

2-Automation and Control of Continuous Linear Invariant Systems (CLIS): Study of the fundamental principles of control and automation. Students learn to design, analyze, and regulate complex dynamic systems to achieve specific performance.

3-Systems Analysis and Requirements with SysML: Introduction to SysML (Systems Modeling Language) for functional analysis of systems. Students acquire skills to model, specify, and analyze the requirements of complex systems, thus facilitating the design and development process.

Matías

4.88

(85)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Haider

4.88

(85)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered in

✔ CAD (including CREO - SolidEdge - Inventor - NX - SolidWorks)
✔ FEM (including Ansys, CREO - SolidEdge - Inventor - NX - SolidWorks)
✔ CFD (including Ansys CFX & Fluent, OpenFoam, CREO)
✔ Energy theory
✔ Thermal theory
✔ Chemistry
✔ BQ NTG
✔ HQ technology
✔ Computer science
✔ Structural theory (TWL 1 to 3)
✔ Elastostatics
✔ Dynamics
✔ Materials science
✔ Steel construction

+ other subjects on request

When contacting us, please state your class/course of study/training and subject!

I am looking forward to hearing from you.

Jeremy

4.88

(85)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have 6 years of experience teaching Physics and Maths to kids from unprivileged backgrounds both in a homework schools as well as via private teaching. In private teaching, I have experience tutoring people with learning disabilities (ADHD, Dyslexia, Discalculia and more), younger kids of ages 7-12 and older students preparing for their final baccalaureate exams in advanced maths/physics curriculums.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Adam

4.88

(85)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Samaa

4.88

(85)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

Nicolas

4.88

(85)

As a current Master's student in Aerospace Engineering at TU Delft, I have successfully navigated the entire Bachelor's curriculum and the competitive selection procedure, so I am fully equipped to guide you through the study plan and specific admission requirements. I offer personalized tutoring sessions designed to ensure comprehensive preparation for the entrance exams. These classes include a detailed review of key concepts in Mathematics and Physics, intensive practice with relevant exercises, and specific strategies to tackle the test effectively. I also place a dedicated focus on mastering the First Year Material (FYM) section (often the most challenging and unfamiliar part for applicants) to help you build the confidence and skills necessary to succeed. Furthermore, I am happy to discuss the degree program itself and explore the opportunities available in Delft to help you prepare for your future student life.

Ayoub

4.88

(85)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Roland

4.88

(85)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. As it is highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A major part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduate Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of experience and knowledge of the program to help you out with the right preparation to get in. Over the last four years, I have helped tens of students secure a spot! Moreover, I offer a free personalised lesson plan for each student, which is fully based on the admission syllabus and past exams, to ensure an even higher chance of admission for each student.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will become more effective and accurate. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, the city of Delft, what to expect from the study and whether it is the right fit for you.

Reza

4.88

(85)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).
Key topics that I teach for this course include:
• Calculus: Differentiation & integration, Multivariable calculus
• Linear Algebra: Matrices, vectors, systems of equations, Eigenvalues and eigenvectors
• Differential Equations: First- and second-order ODEs, Laplace transforms
• Complex Numbers: Polar form, Euler’s formula
• Vector Calculus: Gradient, divergence, curl, Line and surface integrals
• Series & Transforms: Taylor series, Fourier series

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Ammar

4.88

(85)

Engineering and design become much easier when analysis, geometry, technical representation, digital modelling, spatial reasoning, and visual communication are connected within one coherent problem-solving process.

I am a PhD-qualified engineer, university professor, researcher, technical trainer, designer, and multidisciplinary consultant with more than 30 years of experience across engineering, teaching, project work, CAD, technical drawing, 3D modelling, GIS, visualization, information systems, and professional problem solving.

This class provides a personalized pathway for school and university students, engineering and design learners, architects and technicians, researchers, professionals, career changers, and adult learners. Depending on your goals, we can focus deeply on one specialized area or connect several areas within a complete technical workflow.

PHYSICS & APPLIED ENGINEERING SCIENCE
• Mechanics: motion, forces, Newton’s laws, work, energy, momentum, and rotational motion
• Statics, dynamics, equilibrium, torque, and engineering applications
• Fluids, pressure, buoyancy, density, and basic fluid mechanics
• Heat, temperature, thermodynamics, and energy transfer
• Waves, oscillations, sound, optics, electricity, and magnetism according to the learner’s level
• Mathematical modelling of physical systems
• Units, dimensions, vectors, graphs, and interpretation of experimental or engineering data
• Connecting physical principles to engineering design, calculations, and real-world technical problems

CHEMISTRY & ENGINEERING MATERIALS
• Atomic structure, chemical bonding, molecular structure, and periodic trends
• Stoichiometry, chemical reactions, solutions, concentrations, gases, and equilibrium
• Acids, bases, oxidation-reduction, and introductory thermochemistry
• Properties and behaviour of engineering materials
• Metals, polymers, ceramics, composites, and material-selection principles when relevant
• Connecting chemical principles to materials, manufacturing, environmental, and engineering applications

ENGINEERING DESIGN & PROBLEM SOLVING
• Understanding and structuring engineering problems
• Translating requirements into technical objectives
• Identifying constraints, assumptions, variables, and criteria
• Engineering calculations and quantitative reasoning
• Applied mechanics and engineering fundamentals when relevant
• Dimensional reasoning and unit consistency
• Design alternatives and trade-off analysis
• Verification and reasonableness checking
• Engineering decision making
• Design methodology and iterative improvement
• Interpreting technical specifications
• Connecting analysis to drawings, models, and deliverables
• Engineering-management and multidisciplinary project contexts

AUTOCAD & TECHNICAL DRAFTING
• AutoCAD interface and efficient workflows
• Coordinate systems and precise geometric construction
• 2D drafting fundamentals
• Layers, properties, object organization, and standards
• Blocks and reusable drawing content
• Dimensions, annotations, text, and hatching
• Model space and paper space
• Layouts, viewports, scales, and plotting
• Technical drawing principles
• Reading and interpreting engineering drawings
• Plans, sections, elevations, and details
• Drawing organization and documentation quality
• Advanced drafting workflows
• AutoCAD 3D concepts when relevant
• Improving speed, accuracy, and drawing consistency

BIM & REVIT WORKFLOWS
• BIM concepts and model-based thinking
• Revit project organization
• Levels and grids
• Walls, floors, roofs, and building elements
• Doors, windows, components, and families
• Views, sections, elevations, and schedules
• Annotation and documentation workflows
• Sheets and presentation standards
• View templates and graphical consistency
• Family-library organization
• BIM coordination principles
• Connecting models to professional documentation
• Developing structured Revit templates and repeatable workflows

3D MODELLING & PARAMETRIC DESIGN
• 3D geometric thinking
• Curves, surfaces, solids, and meshes
• Constructive and feature-based modelling concepts
• Precision modelling
• Product and engineering geometry
• Architectural and spatial modelling
• Rhino 3D workflows
• Grasshopper and visual parametric thinking
• Parameters, relationships, dependencies, and constraints
• Algorithmic generation of geometry
• Reusable and adaptive design logic
• Design iterations and controlled variation
• SolidWorks and Inventor workflows when relevant
• 3D Studio Max and visualization contexts when relevant
• Connecting models to drawings, analysis, fabrication, or presentation

CAD/CAM & MANUFACTURING WORKFLOWS
• From CAD geometry to manufacturable components
• Design-for-manufacturing principles
• Introduction to CAM concepts and machining strategies
• CNC fundamentals, coordinate systems, tools, operations, and toolpaths when relevant
• SolidWorks CAD/CAM workflows
• Verification, simulation, and interpretation of manufacturing outputs

GIS, MAPPING & SPATIAL ANALYSIS
• Foundations of Geographic Information Systems
• Spatial data models
• Vector and raster concepts
• Coordinate systems and projections
• Georeferencing
• Spatial data collection and organization
• Attribute data and database relationships
• Geodatabases
• Selection and spatial queries
• Buffering, overlay, proximity, and spatial analysis
• Thematic mapping
• Cartographic principles
• Spatial patterns and decision support
• ArcGIS Desktop and ArcGIS Pro workflows when relevant
• Remote-sensing and imagery concepts when relevant
• Integrating maps, analysis, and professional reporting

GRAPHIC DESIGN & VISUAL COMMUNICATION
• Principles of visual communication
• Composition and layout
• Visual hierarchy
• Typography
• Colour and contrast
• Image preparation and editing
• Vector graphics and illustration
• Technical diagrams and infographics
• Maps and spatial presentation
• Engineering and architectural presentation
• Portfolio and project-board development
• Presentation graphics
• Adobe Photoshop workflows
• Adobe Illustrator workflows
• Adobe InDesign workflows
• Connecting technical accuracy with visual clarity

Depending on your objectives, practical work may involve AutoCAD, Revit, BIM workflows, Rhino, Grasshopper, SolidWorks, Inventor, 3ds Max, ArcGIS Desktop, ArcGIS Pro, QGIS, Adobe Photoshop, Illustrator, InDesign, SketchUp, Figma, Canva or other relevant technical and design tools.

My teaching approach follows a structured workflow:
define the problem → understand the requirements → analyze the constraints → develop the geometry or data structure → create the drawing, model, or spatial analysis → verify accuracy → refine the solution → communicate it clearly

I do not simply demonstrate isolated commands. I help you understand why a workflow is appropriate, how information should be structured, how accuracy can be verified, how alternative solutions can be evaluated, and how the final technical idea should be communicated professionally.

We can work with your course syllabus, engineering problem, technical drawing, CAD file, Revit/BIM model, 3D model, parametric definition, GIS dataset, map, design project, portfolio, graphic layout, or professional workflow challenge.

Whether you are learning your first CAD commands, solving an engineering problem, developing a BIM workflow, building a 3D or parametric model, conducting spatial analysis, or improving technical visual communication, I will adapt the sessions to your level, objectives, and pace.

My goal is to help you become an independent technical problem solver who can analyze, design, model, verify, visualize, and communicate solutions with confidence.

Baia

4.88

(85)

I'm a working MEP engineer, currently building Python automation for Revit workflows daily - plan checks, model coordination, and repetitive drafting tasks. I teach other engineers, architects, and BIM professionals how to do the same, using pyRevit and real project workflows, not toy examples.

Topics include:
pyRevit fundamentals and setup
Automating repetitive Revit tasks (model checks, plan generation, data extraction)
Writing custom scripts for your firm's specific workflows
Applying Python automation to real MEP/BIM projects

Norbert

4.88

(85)

Ik stem mijn aanpak volledig af op jouw behoeften.

Samen werken we toe naar wat jij nodig hebt, of het nu gaat om lesstof uit studieboeken of om specifieke praktische vaardigheden.

Tijdens de proefles bespreken we je doelen en stellen we een plan op. Indien nodig passen we dat gaandeweg samen aan.

Iyad

4.88

(85)

As a microtechnology student at EPFL, I tutor high school and gymnasium students in physics. My goal is for you to truly understand the phenomena, rather than simply memorizing formulas.

The program, depending on your level, includes: mechanics (movement, forces, energy), electricity, electromagnetism (electric and magnetic fields, induction), waves and optics, thermodynamics, and modern physics.

Each session is tailored to your needs: catching up on the basics, help with homework, preparing for a quiz or exam, or further study.

I work with concrete examples, progressive exercises, and clear explanations, and you have time to ask all your questions. Welcome to students who want to gain confidence in physics!

Khaled

4.88

(85)

All Subjects for Civil Engineering Students and Graduates. Subjects cover also professional Engineers needs in Building Information Modelling (BIM), Project Management, AI Transformation, Construction Methodologies, Lean Construction and FIDIC Contracts.

Pratheek

4.88

(85)

- Learn professional CATIA V5 and V6 modeling from a Senior Mechanical Design Engineer with over 12 years of OEM experience across automotive and high-capacity rolling stock platforms.

- Master parametric 3D modeling, advanced surfacing, sheet metal assemblies, structural aluminum extrusions, and tolerance stack-up analysis through practical industry workflows.

- Whether you are an engineering student aiming to build a standout portfolio or a professional looking to master global compliance standards (EN, GMRT) and Design for Manufacturing (DFM), get personalized guidance tailored to your goals.