Online Engineering Tutor: Thermodynamics, Solid Mechanics, Dynamics, Control Systems and MATLAB with an Aerospace Graduate

From 68 C$ /h

Build a clear understanding of engineering and learn to solve problems independently. I am an Aerospace Engineering graduate from the Institute of Space Technology, Islamabad, offering online lessons for college and university students.

Topics include thermodynamics, solid mechanics and strength of materials, engineering dynamics, control systems and engineering materials. Where relevant, we use MATLAB and Simulink for modelling, simulation, plotting and checking results. Please send your syllabus or specific questions before booking so I can confirm the topic and level are a good fit.

A typical 60-minute lesson starts with a short review of your question and the concepts behind it. We identify assumptions, choose a diagram or mathematical model, and work through a representative problem step by step. You then try a related problem with feedback. We finish by reviewing the method, common mistakes and a focused practice target.

For exams, we can practise suitable past-paper questions and improve the structure of your working, units, sign conventions and interpretation. For coursework, I help you understand the brief, plan your method, debug your code and review your own reasoning so you can produce and explain your own work.

Lessons are online via webcam in English, Urdu or Punjabi. To discuss a lesson, message me through Apprentus with your course level, topic, deadline and any relevant materials.

Extra information

Before booking, please share your syllabus, topic and a sample question through Apprentus so I can confirm suitability. For the lesson, bring your notes, a way to write or annotate working, and MATLAB/Simulink if we have agreed to use it. Lesson times are agreed in advance; my time zone is Asia/Karachi (UTC+5).

Location

Online from Pakistan

About Me

I am Ali, an Aerospace Engineering graduate from the Institute of Space Technology, Islamabad. I provide online tutoring in engineering, engineering mathematics and technical problem solving for college and university students. My core areas include thermodynamics, solid mechanics, dynamics, control systems and MATLAB/Simulink.

My lessons connect physical meaning, diagrams and equations. We start with what you already understand, identify the specific gap, and work through a representative problem together. You then practise a similar problem with feedback. I pay attention to assumptions, units, sign conventions and checks that help you judge whether an answer makes sense.

Please share your course level, syllabus and the topics you want to cover through Apprentus before booking, so I can confirm that the lesson matches your needs. Lessons are online and can be taught in English, Urdu or Punjabi.

Education

BS Aerospace Engineering, Institute of Space Technology, Islamabad, 2026.

Relevant degree coursework includes engineering mechanics, thermodynamics, aerodynamics, control systems, flight dynamics and stability, numerical analysis, CAD, artificial intelligence, digital systems, and spacecraft dynamics and control.

Experience / Qualifications

I provide structured online tutoring for engineering and related technical subjects, including concept revision, guided problem solving and exam preparation. My aerospace engineering background helps me connect mathematical methods with physical systems, modelling and simulation.

I support students in understanding assignment briefs, planning their approach, reviewing their own work and finding errors. The aim is to help students develop the reasoning and confidence to complete their work independently.

Topics and software support are agreed after reviewing your materials. I can help with MATLAB/Simulink modelling, interpretation and debugging where these fit the course topic.

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Urdu

Panjabi

Skills

Engineering

Mechanical engineering

Thermodynamics

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Reza

4.64

(25)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

My extensive teaching experience covers a wide range of engineering courses, including:

- Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics.

- Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more.

- Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc.

- CAD/CAM Software: Autocad, Solidworks.

- Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA.

My research and teaching interests are diverse, including:
• Additive manufacturing
• Mechanical metamaterials
• Acoustical metamaterials
• Electromagnetic metamaterials
• Aeroacoustics
• Soft matter and soft robotics
• Fatigue and fracture mechanics
• Experimental mechanics
• Multiscale numerical modelling
• Biomaterials
• Porous materials
• Manufacturing of medical devices and implants
• Deep learning
• Image processing
• Topology optimization
• Origami and Kirigami structures
• Self-folding and self-assembly structures
• Tissue engineering
• Permeability in porous materials
• Fluid-Solid Interaction

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Matías

4.64

(25)

Do you aspire to master mathematics, physics and engineering at a university level? Do you want to exceed your limits and excel in these demanding fields? Do not search anymore ! Our tailor-made private lessons are there for you.

Why choose our courses?

Unparalleled Expertise: Our professors are experts in their field, with extensive experience in university teaching. They are ready to guide you towards success.

Personalized Program: We tailor each course to your specific needs, from understanding fundamental concepts to solving complex problems.

Total Flexibility: Choose the schedule that suits you best. Whether you are an active student or a professional, we adapt to your schedule.

Constant Support: You will benefit from continuous monitoring between classes to answer all your questions and concerns.

Quality Teaching Materials: We provide high-quality learning resources to support your progress.

Who can benefit from our courses?

High school students preparing for their baccalaureate or entrance exams to engineering schools.

University students pursuing a degree in mathematics, physics or engineering.

Professionals looking to acquire or deepen technical skills.

Join us today!

Excellence doesn't wait. Contact us now to book your first lesson. Together we will build a bright future based on a solid understanding of mathematics, physics and engineering.

Haider

4.64

(25)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered in

✔ CAD (including CREO - SolidEdge - Inventor - NX - SolidWorks)
✔ FEM (including Ansys, CREO - SolidEdge - Inventor - NX - SolidWorks)
✔ CFD (including Ansys CFX & Fluent, OpenFoam, CREO)
✔ Energy theory
✔ Thermal theory
✔ Chemistry
✔ BQ NTG
✔ HQ technology
✔ Computer science
✔ Structural theory (TWL 1 to 3)
✔ Elastostatics
✔ Dynamics
✔ Materials science
✔ Steel construction

+ other subjects on request

When contacting us, please state your class/course of study/training and subject!

I am looking forward to hearing from you.

Jeremy

4.64

(25)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have 6 years of experience teaching Physics and Maths to kids from unprivileged backgrounds both in a homework schools as well as via private teaching. In private teaching, I have experience tutoring people with learning disabilities (ADHD, Dyslexia, Discalculia and more), younger kids of ages 7-12 and older students preparing for their final baccalaureate exams in advanced maths/physics curriculums.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Adam

4.64

(25)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Samaa

4.64

(25)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

Nicolas

4.64

(25)

As a current Master's student in Aerospace Engineering at TU Delft, I have successfully navigated the entire Bachelor's curriculum and the competitive selection procedure, so I am fully equipped to guide you through the study plan and specific admission requirements. I offer personalized tutoring sessions designed to ensure comprehensive preparation for the entrance exams. These classes include a detailed review of key concepts in Mathematics and Physics, intensive practice with relevant exercises, and specific strategies to tackle the test effectively. I also place a dedicated focus on mastering the First Year Material (FYM) section (often the most challenging and unfamiliar part for applicants) to help you build the confidence and skills necessary to succeed. Furthermore, I am happy to discuss the degree program itself and explore the opportunities available in Delft to help you prepare for your future student life.

Ayoub

4.64

(25)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Intasar

4.64

(25)

I have graduated with a degree in chemical engineering from the University of Edinburgh, UK. I am also an Erasmus Mundus scholar with a master's in Analytical Chemistry from Uppsala University. Currently, I am pursuing a PhD in physical chemistry.

I have been tutoring since 2012 to fund my education expenses. I formally began tutoring in 2014 as part of my vocational training as a teacher in Ghana, funded by the University of Edinburgh. The formal training has taught me a lot about curriculum development, time management, and fusing my teaching methodology to my students’ needs. I have been tutoring in Physics, Chemistry, and Math, in person and online; the hybrid model has allowed me to reach out and teach students in 8 different countries. I have successful students from these past nine years who have not only commended my work ethic but can also stand testament to my enthusiasm.

My excellent academic career has nurtured in me a natural talent for teaching. My experiences have taught me how to tackle one problem at a time, and I believe that using this approach—paired with my unconventional examples that force students to think outside the box—I can truly provide an excellent understanding and explanation. My teaching methodology is based on two main things: skill development and adaptation. Initially, I create a skeleton of the most suitable methodology tailored to the preferred curriculum, after which, I adapt that lecture to the specific needs of the student based on their knowledge and grasp of the concepts. Second, I like to develop analytical and scientific ability along with knowledge in my students, and for that, I use a combination of resources in the form of worksheets, class tasks, and past papers. Last, I believe in the strong ethic of providing feedback to the parents, so that they are aware of their child’s progress.

Frequently Asked Questions:
Which subject(s) do you teach?
I teach math, mechanics, statistics, chemistry and physics. I also teach biology up to GCSE level.

When are you available? My timetable is quite flexible. I am happy to work weekdays, week evening and weekends.

Which ages and levels do you teach? The majority of my students are between the ages of 10-18, but I also teach college Students. I am also helping foundation and first year university students.

Which qualifications do you prepare your students for? GCSE, o-level, A/S-level, A-level, IB, School entrance exams and SATs

Describe your arrangements for online tutoring? I use Zoom online sessions since it has many tools and features specially designed for interactive and visual learning. I am fully equipped with modern gadgets for e-learning. I use Google drive and docs to share files.

Alonso

4.64

(25)

I am a Mechanical Engineer, Master in Mechanical Engineering and Retired Full Professor from the University of Zulia (Venezuela).
I taught university-level engineering courses for over 30 years. I helped train more than 9,000 students. I supervised over 50 undergraduate theses. I taught undergraduate and graduate courses in various subjects related to mechanical engineering (Mathematics, Physics, Dynamics, Mechanisms, Strength of Materials, Stability, Solid Mechanics, Fluid Mechanics, Machine Elements, Machine Design, Statics, Mechanics of Machines, Mechanics of Materials, Rational Mechanics, Principles of Lubrication, Simulation of Sliding Bearings, Advanced Mechanics of Materials, Stress Analysis, Failure Theories, Structures, Mechanisms). In addition, I have given private lessons in Physics, Statics, Strength of Materials, Stability I, Stability II, Fluid Mechanics, Rational Mechanics, Mechanics of Materials, Dynamics, Elements of Machines and Mechanisms for 7 years to students from different countries of the world (online) and in particular to students from Argentina (online and in person) from various universities in the country (UBA, ITBA, UTN, UNLZ, UADE, etc).

Stop struggling with Strength of Materials! Many students get lost among so many formulas. My goal is for you to understand the physical logic behind each problem. I am a university professor and offer personalized tutoring for undergraduate and graduate students.
What we will do:
- Solve exercise guides.
- Intense preparation for midterms/finals.
- Theoretical explanations focused on practice.
I have extensive experience teaching courses related to Mechanical Engineering at both the undergraduate and graduate levels. I have taught courses such as Strength of Materials, Stability I, Stability II, Statics, Mechanics of Materials, Elasticity, Mechanics of Solids, Fluid Mechanics, Machine Elements, Rational Mechanics, Stress Analysis, Mechanisms, Mechanics of Machines, and Advanced Mechanics of Materials. Furthermore, I have a strong background in Mathematics, Mathematical Analysis, Calculus, and Physics (Statics, Kinematics, and Dynamics). I emphasize teaching through problem-solving and practical applications.
For online classes I use a digitizing tablet connected to the computer and an interactive digital whiteboard that allows me to develop and explain the solution to exercises or the theory in real time directly on PDF or JPG files (they can be exercise or theory guides), which makes the class more enjoyable and efficient and also guarantees the same quality as a face-to-face class.

I am a University Professor with extensive experience in teaching subjects related to Mechanical Engineering at the Undergraduate and Postgraduate levels. I have taught subjects such as Strength of Materials, Stability, Elasticity, Solid Mechanics, Machine Elements, Rational Mechanics, Stress Analysis, Mechanisms, Machine Dynamics and advanced materials mechanics. In addition, I have a solid background in Mathematics, Mathematical Analysis, Calculus and Physics (Kinematics and Dynamics). I emphasize through problem solving and practical applications.

Baia

4.64

(25)

I'm a working MEP engineer, currently building Python automation for Revit workflows daily - plan checks, model coordination, and repetitive drafting tasks. I teach other engineers, architects, and BIM professionals how to do the same, using pyRevit and real project workflows, not toy examples.

Topics include:
pyRevit fundamentals and setup
Automating repetitive Revit tasks (model checks, plan generation, data extraction)
Writing custom scripts for your firm's specific workflows
Applying Python automation to real MEP/BIM projects

Hakan

4.64

(25)

I offer personalized Mechanical Engineering lessons for university students who want to strengthen their understanding of core engineering subjects, prepare for exams, solve assignments, or improve their problem-solving skills.

My main teaching areas include:

Thermodynamics

Fluid Mechanics

Heat Transfer

Engineering Mathematics

Calculus

Physics

Computational Fluid Dynamics (CFD)

ANSYS Fluent fundamentals and engineering applications

My lessons focus on understanding the physical and mathematical principles behind engineering problems rather than simply memorizing formulas. I explain concepts step by step, work through practical examples, and adapt the lesson to the student's current level and objectives.

Lessons can be used for exam preparation, topic revision, homework and problem-solving practice, or structured study throughout the semester.

As a mechanical engineer with university teaching and laboratory experience, I aim to connect theoretical concepts with real engineering applications whenever possible.

Hakim

4.64

(25)

Salam i am Hakim I am an engineering student offering practical, personalized online lessons in Languages (Algerian Darija, Tamazight, and French and islamic lessons) as well as STEM subjects (Mathematics, Robotics, and Control Systems).

Whether you want to reconnect with your family roots, prepare for travel to North Africa, master conversational French, or get clear, step-by-step guidance in Mathematics and Robotics engineering concepts, I tailor every lesson to your exact goals.

My teaching style is focused on clarity, practical application, and building your confidence whether we are practicing everyday language dialogues or solving complex engineering problems. Let's work together to achieve your goals

Fariah

4.64

(25)

I make STEM subjects, especially Mathematics and Physics, easier and more enjoyable for students by breaking down difficult concepts into simple, step-by-step explanations. My lessons focus on building a strong understanding of the basics before moving on to more challenging problems.

I use practice exercises, exam-style questions, and real examples to help students apply what they learn and build confidence. With a 730 SAT Math score and a strong academic background in Mathematics and Physics, I can help students improve their problem-solving skills, prepare for exams, and achieve their academic goals.

My teaching approach is patient, interactive, and adapted to each student’s learning pace, so students feel comfortable asking questions and learning from their mistakes.

Turgut

4.64

(25)

This course provides a comprehensive and practical guide to modern engineering, focusing on core concepts such as electromagnetic modelling, RF systems, and sensor technologies. Designed for all skill levels, the course breaks down complex technical phenomena into clear, digestible modules through structured lectures, visual presentations, and step-by-step demonstrations.

You will learn not only theoretical principles but also effective presentation and communication techniques to clearly explain complex technical data, pitch engineering designs, and share project results with multidisciplinary teams. Whether you are building prototypes or presenting technical solutions, this course equips you with both technical expertise and professional communication skills.