Trusted teacher

I specialize in Maths, Science and English. These subjects are basic staples in life which you'll need to study in any major field. As I have done my Mechanical Engineering I would be able to guide you through these subjects and make it look easy!

Trusted teacher

This lessons will take you from knowing the basics about SOLIDWORKS to give you all the knowledge and skills needed to become a certified SOLIDWORKS Professional (CSWP). This lessons will enable you to, with confidence, use SOLIDWORKS to design complex innovations and draft complex models. After this lessons, you can proudly list your advanced SOLIDWORKS skills in your resume.

Trusted teacher

Lecturer talking too fast? Or just not explaining things properly? Need something broken down into easy steps? I'm here to help! From Thermodynamics to Material Engineering, let me know what you need help with and we can set up a customised lesson. I'm also happy to cover Engineering Maths. With hard work and a lot of studying, I have recently graduated with a Master in Mechanical Engineering with Distinction. I achieved As in every module, bar one, and achieved this by gaining a really good understanding of each subject.

Trusted teacher

I specialise in mechanical engineering, and teach basic maths and physics to a lot of students. I am currently a PhD student in Sweden and I love teaching. I can help in explaining the topics pedagogically, and I understand the level of student. I always try to blend in and adjust the levels so that the student get the best out of it. I have a high knowledge of how to apply the maths in real life applications and I always come with examples to keep the students interested.

Trusted teacher

Engineer of training and trade, I give courses of sciences of the engineer, mechanical engineering, robotics, mechanical design.

Trusted teacher

Hello everyone and have a nice day, As a teacher, teacher, student, teacher, professional teacher, and professional student/coaching/unterstützung in MATLAB/Simulink/embedded programme/automatic code generation...etc., you can also contact him. Use this device for your Master Elektrotechnik-Ingenieur with a new academic design and installation tool in the basic model and use the Matlab/Simulink-Model for embedded System and Regelung on the E-Motoren with a fan and pass it. and Anforderungen. For more information, please contact us. Unterstützung professionelle in Matlab, Simulink, C, Microcontroller and embedded Programmierung an. There is a lot of expertise in this article, too: - Matlab, Simulink, - S-Functions, Simulink Modelle, Model Basierte Programmierung and Code Generation, - Electrical drives and E-Motoren, - STM32 Microcontroller, - Rapid Prototyping mittels dSPACE HiL-Systeme and Echtzeit-Systeme, - Power electronics / Leistungselektronik, - Betreuung and Unterstützung während verschiedenenenenenen der projecterbeiten, - ... There is a lot of contact with you. Very nice greetings

Trusted teacher

Hi here is Mc larry, I am a French and English native speaker with German as my third language. I currently live in Germany where I study Mechatronic Systems Engineering. I have 2 years of experience as a French tutor and I find it most of the time interesting. French is a romantic language for me and I find it good to be able to share some of the knowledge I know to students or people. As an English tutor, I just have a few months of experience but I find it awesome too. My teaching techniques are very easy and simple to understand and I hope i will be able to share that with you :)

Trusted teacher

As an Associate Professor of Industrial Engineering (CPGE), a State Engineer in Mechanical Engineering and a Doctor (PhD), I offer private mechanics lessons all year round, remotely or at home, for pupils and students. For who ? Objective of excellence (improvement, ranking, selective applications). Refresher courses in case of gaps or weak foundations. Consolidation of fundamentals and mastery of useful techniques throughout the course. Targeted preparation for tests, exams and oral presentations. CPGE competitive entrance exams: CCINP, Centrale, Mines-Ponts, MP, PSI, TSI streams. Technological Baccalaureate: STM, STE, SMB (refresher and intensive training). Project support (final year project, TIPE, mini-projects). Revision/preparation: review the essentials of the past year and get ahead. Subjects taught Solid mechanics: kinematics, statics, dynamics, energy (and kinetics). Strength of materials & vibration; elasticity; fracture mechanics. Mechanism theory. Mechanical engineering & mechanical manufacturing (processes, tolerances, metrology). Materials: mechanical characterization; equilibrium diagrams (binary, Fe-C). Thermal and thermochemical treatments. MMC (continuous media): modelling and calculations. CAD/Design: CATIA, SolidWorks. NDT/NDT: principles and applications (basics). Terms and conditions Format: individual or small groups. Location: online (interactive whiteboard, screen sharing, files) or at home. Method: initial diagnosis, personalized work plan, progressive exercises, exam-style questions, annotated corrections, regular assessments. Materials: summary sheets, roadmaps, bibliographies, corrected exercises. Targeted results Solid foundations, operational methods, autonomy and sustainable performance. Effective preparation for assessments and competitions, increased confidence and speed.

Trusted teacher

Hello everyone. My name is Ayoub, a professor of industrial sciences, with more than 6 years of experience in academic support. I offer private engineering science lessons at home in Kenitra, Rabat and Casablanca or remotely for pupils and students: • Who has basic difficulties or deficiencies... • Who want to strengthen the base and get used to the techniques seen throughout the course and which are always useful to know and master. • Who wish to review the essentials of the previous year's program and get ahead of the program. These courses are intended for CP-BTS and high school students and are personalized for each student according to their level, ability and motivation, guaranteeing the best marks in the national exam. Methodology The course takes place in three stages: 1) Summary and explanation of the course or chapter to work on then target the essentials of the course. 2) Do simple exercises to put the course into practice and apply an effective method of solving and writing exercises. 3) In a third step I give exercises with increasing difficulty that the student will do on his own to test him and put him in a condition to manage independently. We correct this list of exercises together and the unsuccessful exercises are to be redone by the student for the next session.

Trusted teacher

I love the process of teaching and learning alike, because I feel the same joy assisting someone to learn something, as if I had just learned something new and wonderful myself. For university level mechanical or related engineering students, I have over 3 years of official tutoring experience at the University of California, Davis, while studying Aerospace and Mechanical Engineering. I enjoy helping you with Calculus, Differential Equations, Physics, and many more listed below: Differential, Integral, Vector, and Multivariable Calculus, Linear Algebra, Differential Equations, Dynamics, Statics, Fluid Mechanics, Thermodynamics, Thermofluid Dynamics, Mechanics of Materials, and Electrical Circuits and Systems. My tutoring philosophy consists of 3 core principles: - Positive feedback - Asking questions - Pen in your hand Positive feedback means that I will never become impatient with you, over-emphasize what you did wrong, make you feel bad for your mistakes, or make you feel stupid. Comfortably making lots of mistakes will help you learn better and retain your problem-solving process more easily. I will praise and congratulate you often for the concepts that you come to understand, and will point out that even if you don't reach the correct answer, there were many correct thinking-processes that you were using that deserve recognition. Asking questions means that I will never give you the answer directly, but rather confirm what you have right, and ask you targeted questions to help you think differently about the problems you are struggling with. I believe it is the most effective and most enjoyable way to learn something, when you manage to deduce some of the answers to your questions yourself. You will retain the concepts longer and it will better equip you to learn related topics in the future. Pen in your hand means that you will be the one driving the session. I want you to narrate your thoughts, decisions, and reasons for why you write down what you do. This will help understand the problem better by simply speaking it aloud, and it will help me better understand exactly what you do/don't understand.

Trusted teacher

Get professional help in : Assignment Research paper Thesis For engineering, economics Programming, Computer science Robotics Manufacturing technology Full support. Done by qualified and experienced professionals. From various fields of study

Trusted teacher

I am an Aeronautical engineer, graduated from the Royal Military School. I provide private lessons in mechanics (fluids or solids), thermodynamics and engineering sciences. Courses are mainly taught online on different platforms (zoom, skype, teams, etc.). My goal is to help students understand and find solutions to the problems they face. I try to help them develop their own working method by giving them different elements and guiding them in the way that suits them best.

Trusted teacher

Mechanical Engineer graduated from INSA Lyon gives courses to teach students how to carry out digital modeling and simulations as part of higher engineering studies. Whether for power transmission, material resistance, vibration and acoustics, solid dynamics, structural mechanics, heat transfer and fluid mechanics, the objective is to teach student how to take charge and thus master software, such as ANSYS, ABAQUS FEA, COMSOL Multiphysics, STAR CCM+, MATLAB and ARTEMIS, which allow engineering students to carry out case studies and projects in the field of elements and finite volumes or using numerical schemes and the finite difference method. I have sufficient experience in numerical modeling and simulation applied to various engineering cases such as: 1. Thermal analysis of CubeSat 2. Thermal study of heat-reflecting paint 3. Study of fluid mechanics in agitation and mixing 4. Fluid mechanics study of an inclined skate 5. Acoustics analysis of various sounds 6. Vibration analysis of structures 7. Analysis of bearings and their vibration due to present defects 8. Simulations of transmission errors in gears 9. Modeling contacts in gears 10. Hertz theory 11. Study of Friction and Lubrication of an air thrust bearing 12. Thermoelasticity simulation 13. Simulation in Structural Calculation 14. Simulation of static resistance of a car 15. Simulation of mechanical resistance of beams

Trusted teacher

Hello, I am an educator. You can find information about the mechanics-based courses you encounter in your education life. You can find information about Static, Mechanical, Dynamic, strength, kinematics, mechanical vibrations, finite element analysis, Ansys program

Trusted teacher

I will teach in this class physics 101 and physics 102 this will be explanation of chapters from university physics books and problem session solving I will teach the students how to solve the problem correctly in a fast way topics will be mechanics, electromagnetism, vibrations , thermodynamics and quantum physics

Trusted teacher

I am a Mechanical Engineer and I provide support to students for the semester assignments they have to do as well as support for their dissertation. Areas I specialize in are Finite Element Analysis (ANSYS) in Fluid, Heat Transfer and Structure Durability Problems, Construction Sector Studies, MATLAB Simulations, Robotics and 3D Object and Structural Design in Solidworks, Inventor, AutoCAD 2D. Private lessons are also delivered in the whole range that has to do with the Mechanical Engineer.

Trusted teacher

Do you want to significantly increase your child's mathematical average? Do you want it to integrate a selective course? Do you want it to become autonomous? For 7 years, I have helped more than 100 students in difficulty from middle school and high school to achieve their goals and regain self-confidence. My method in 3 points: - in the short term, significantly increase the average by assimilating the course and preparing for the next tests (assimilating the course, writing files, practicing standard exercises, anticipating the teacher's expectations and test questions, having methods of writing) - in the medium term, integrate reasoning and work methods (learn to work regularly in this order: assimilation, training exercise, preparation for the test and analysis of the pass test) - in the long term, set a goal, build the steps to reach this goal, become aware of the SIMPLICITY of math, have confidence in your abilities, release your potential) Your child can contact me whenever he wants If you want to increase your child's math results, contact me before the next test!

Trusted teacher

Tutor for Math, Science and Technology Hi, I am a private tutor providing lessons for Degree students and School students and now available in Bahrain for any help in Math, science and engineering subjects. I have been tutoring for past ten years. I taught and helped in mathematics, physics and Mechanical engineering related subject for students from Bahrain University, Bahrain polytechnic, AMA University and from other few Universities of Australia and Europe for Bahraini, Emirati, Saudi and other students. In Bahrain, I have been teaching students of Riffa Views International School, British School, St Christopher School, Al Noor International School, New Millennium School, Indian School, New Indian School, and AMA International School. I teach them Math and Physics and Chemistry.

Trusted teacher

A university teaching assistant with six years of teaching experience in teaching mechanical engineering students. I had experience in teaching various engineering courses including college physics, engineering drawing, thermodynamics, fluid mechanics, programming with C++ and Fortran languages, design of thermal systems, and more. I have an M.Sc. in mechanical engineering with my research area in the field of internal combustion engines. I can deliver the information easily and conveniently, and I focus on having the student understand the basics deeply, and then consolidate this understanding by solving problems. I establish in the student mind the systematic method of solving problems because it develops the ability to solve engineering problems - as well as problems of daily life - in a correct manner.

Trusted teacher

CAD software is powerful tool used in many industries for Mechanical design. In this course I will teach PTC CREO CAD software. I have 11 years of industrial experience in Automobile industries to design Automobile components. So my course will prepare you such that you can start working in industry or you can start as freelancer as well. I will be supporting you for your projects after course as well. This course is divided into 3 categories, Basic, Intermediate and Advanced. As per your need you can choose the course level. If you have computer it will be good so that you can do practice at your home, or you can practice at my PC. Please contact me to discuss more, we can customize this course as per your need. Thank you

Trusted teacher

State engineer in aeronautics (mechanical engineering) laureate the Royal Air School of Marrakech accumulating 5 years of experience, Phd in numerical mechanical calculation (vibroacoustic and aeroacoustic) at the EMI and specialized master in nonlinear mechanics offers you private lessons in mechanics at a distance (or at home) for pupils and students: • Who has basic difficulties or deficiencies in Mechanics... • Who want to strengthen the base and get used to the techniques seen throughout the course and which are always useful to know and master. • Who needs to prepare specific competitions (Or DS). • Who needs help with the graduation project. • Who wish to review the essentials of the previous year's program and get ahead of the program. the courses I offer: -the mechanics of rigid solids (Kinematics, Statics, Dynamics, Kinetics, Energetics). - Theory of Mechanisms. - solid mechanics (materials and structural calculation), vibrations, dynamics - the mathematical tools necessary for mechanics (modeling and simulation process) - finite element method for the linear and nonlinear case. - Computer-assisted design CAD (Catia). - Tired -science of materials and composite materials. -mechanics of fluids and thermal (CFD). - Non-destructive testing.

Trusted teacher

Mechanical engineering is a broad field that covers various topics related to the design, analysis, and manufacturing of mechanical systems. Here’s a brief overview of the core subjects you would typically study during a mechanical engineering program at university: Mathematics: Calculus: For understanding changes in systems, modeling dynamic behavior, and analyzing forces and motions. Linear Algebra: Used for solving systems of equations, matrix operations, and structural analysis. Differential Equations: Essential for modeling physical systems that change over time (e.g., motion, heat, fluid flow). Probability and Statistics: For analyzing data, reliability, and risks in engineering systems. Physics: Mechanics: Studying the forces and motion in solid bodies (statics and dynamics). Thermodynamics: Understanding energy systems, heat transfer, and the conversion of energy between mechanical forms. Fluid Mechanics: Focuses on the behavior of fluids (liquids and gases) in motion and at rest, which is essential for systems like pumps, engines, and turbines. Material Science: Exploring the properties of materials and how they behave under various conditions (stress, temperature, etc.). Statics and Dynamics: Statics: Study of forces in equilibrium, such as the forces on structures or machines that are not moving. Dynamics: Study of forces and motion in systems that are in motion, including vibrations, acceleration, and kinematics. Strength of Materials: Learning how materials respond to various forces, including stress, strain, bending, and torsion. This is essential for designing durable and safe structures and machines. Manufacturing Processes: Understanding different manufacturing techniques like casting, welding, machining, 3D printing, and material forming. Concepts of production planning, quality control, and design for manufacturability. Control Systems: Study of systems that maintain desired outputs (e.g., in robotics or automated systems). This includes understanding feedback loops and stability. Machine Design: Focus on designing mechanical components (gears, shafts, bearings) to perform specific tasks reliably and efficiently. Heat Transfer: Studying how heat moves through materials and fluids, which is critical for applications like engines, HVAC systems, and electronics cooling. Dynamics of Machinery: The study of moving mechanical components, their vibrations, and how to design them to minimize failure and wear. Computational Methods: Learning how to use software tools (like CAD, FEM, and CFD) for designing, simulating, and analyzing mechanical systems. Robotics and Automation: Study of robotic systems, automation in manufacturing, and how to integrate mechanical components with electronic control systems. Renewable Energy and Sustainability: Topics related to sustainable engineering solutions, energy-efficient systems, and the use of renewable energy sources (wind, solar, etc.).