Interior and Exterior Lighting Course by Webcam - Sousse

Translated by GoogleSee original

Interior and Exterior Lighting Course by Webcam

From 41 C$ /h

This course will contain all of these chapters:
Introduction
Photometric quantities
Lighting devices
* Light sources
* Lighting fixtures
Lighting quality criteria
Preliminary lighting project
Applications on real lighting projects

Location

Online from Tunisia

About Me

University lecturer in Electrical Engineering and Electrical Consulting Engineer with 20 years of experience gives online courses in electricity; Electrical Engineering and Electrotechnics.

Education

Electrical Engineer and DEA in Automation and Industrial Computing
Specialist in Electrotechnics (Low Voltage Electrical Installation Engineering)

Experience / Qualifications

20 years of experience as an Electrical Engineering Technologist Currently Electrical Engineering Technologist
Electrical Consulting Engineer for the Construction Sector

Age

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

Arabic

Italian

English

French

Skills

Engineering

Electrical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Detailed course in Domestic Electricity by Webcam

41 C$ /h

This course will contain all of these chapters:
General Theme:
DOMESTIC DISTRIBUTION – SMALL AGRICULTURAL – SMALL TERTIARY
Chapters:
1 DELIVERY OF ENERGY
2 ELECTRICAL INSTALLATION OF A HOUSE
3 DIAGRAMS OF THE DOMESTIC INSTALLATION
4 Main installation rules
5 DRIVER SECTIONS
6 CALIBER OF PROTECTIONS
7 CASES OF BATHROOMS
8 DISTRIBUTION TABLE
9 Electrical conduits
10 EQUIPMENT
11 PROTECTION OF PROPERTY
12 USER PROTECTION
13 Surge Protection

Electrotechnics Low Voltage Electrical Installations

41 C$ /h

Several courses on Low Voltage electrical installations
General design rules
Connection
LV Distribution Architecture
LV equipment
Power Budget
Circuit Protection
Choice of pipes
Electrical Safety
Power surges
Reactive energy compensation
Domestic Facilities
NFC15-100 standard.

Matías

4.88

(85)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Jeremy

4.88

(85)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have 5 years of experience teaching Physics and Maths to kids from unprivileged backgrounds both in a homework schools as well as via private teaching. In private teaching, I have experience tutoring people with learning disabilities (ADHD, Dyslexia, Discalculia and more), younger kids of ages 7-12 and older students preparing for their final baccalaureate exams in advanced maths/physics curriculums.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Adam

4.88

(85)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Samaa

4.88

(85)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

Rania

4.88

(85)

[ENG]: Infrared (IR) spectroscopy is a powerful analytical technique used to study the vibrational patterns of molecules. It is widely used in the fields of chemistry, biochemistry and materials science to identify and characterize chemical compounds. Understanding the interpretation of infrared spectra is crucial for accurate analysis of complex samples.
In this online course, you will learn the basics of infrared spectroscopy and its application in chemical analysis. You will learn how to interpret infrared spectra, including identifying characteristic peaks and understanding their relationship to specific chemical functional groups and ligands. You will also learn how to use infrared spectroscopy for quantitative analysis, and how to analyze complex spectra.

By the end of this course, you will have a strong foundation in infrared spectroscopy and will be able to analyze and interpret infrared spectra with confidence. This course is suitable for students and professionals in the fields of chemistry, biochemistry and materials science who wish to expand their knowledge of analytical techniques

Join us to unleash the potential of infrared spectroscopy in your research and analysis.

[French]: La Spectroscopie infrarouge (IR) is an analytical technique for permanently performing vibrational modes of molecules. It is large in the domains of chimie, biochemistry and materia science to identifier and react to chemical compositions. Comprendre l'interpretation des Specters IR is essential for analyzing précise d'échantillons complexes.

Color formations in line, the broad application of infrared conformational rules and the application of its son in chimique analysis. Numerous opinions and comments on the infrared spectra, the testimony in the selected images and the close relationship between the artistic groups and the relationships between chimeric species. également également à utiliser la Spectroscopie IR for quantitative analysis and spectrum complex analyzer.

Accurate disc formation, solid base and IR spectroscopy et al are able to analyze and interpret infrared spectra in confidence. These courses are addressed to students and professions in the fields of chemistry, the body, biochemistry and the science of matériaux that souhaitent élargir leurs connexiones des analytical technologies.

Rejoin us to edit the effective IR spectroscopie in your searches and analysis.

Ayoub

4.88

(85)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Roland

4.88

(85)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. As it is highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A major part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduate Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of experience and knowledge of the program to help you out with the right preparation to get in. Over the last four years, I have helped tens of students secure a spot! Moreover, I offer a free personalised lesson plan for each student, which is fully based on the admission syllabus and past exams, to ensure an even higher chance of admission for each student.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will become more effective and accurate. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, the city of Delft, what to expect from the study and whether it is the right fit for you.

Ali

4.88

(85)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

Venkateswarlureddy

4.88

(85)

I am an Analog IC Design Engineer with strong academic and practical experience in integrated circuit design. During my master’s, I published two conference papers in the field of analog and power management circuits. Currently, I am working as an Analog IC Design Engineer, focusing on developing circuits such as operational amplifiers, current mirrors, bandgap references, and LDOs. My teaching approach blends solid theoretical foundations with real-world design practices, making complex concepts intuitive and industry-relevant. Whether you are a beginner or an advanced learner, I can guide you from fundamentals to hands-on design methodologies.

Yomna

4.88

(85)

This course explains how air interacts with bodies, from airfoils to aircraft.

Topics Covered:

Aerodynamic forces and moments
Airfoil theory and lift generation
Drag and pressure distribution
Subsonic and compressible aerodynamics
Boundary layers and flow separation

Applications:

Aircraft and drones
Automotive aerodynamics
Wind and performance analysis

يحيى

4.88

(85)

Lesson:
This course is a cornerstone for any student aspiring to excel in scientific and technological fields. The lesson focuses on transitioning from traditional mathematics to the world of "instantaneous change" through the study of limits, derivatives, and their vital applications.
In this course you will learn:
• A deep understanding of Limits and Continuity.
• Mastering the rules of differentiation for various functions (trigonometric, exponential, and logarithmic functions).
• Applying differentiation to solve real-world problems such as finding maximum, minimum, and time-related rates.
• A preliminary introduction to the concept of integration and spaces.
This content is designed to be a practical and comprehensive guide to help you excel academically and pass exams with high efficiency.
):
Calculus I serves as the bridge between school mathematics and advanced university science. This course is specifically designed to enable students to understand the "language of movement and change" that governs our world, and it is a fundamental and essential requirement for engineering, artificial intelligence, and science students at top universities nationwide.
What will the student learn on this academic journey?
• The philosophy of limits and continuity: We will break the barrier of fear of limits, to learn how to predict the behavior of functions at critical points and how to determine the continuity of curves, which is a vital basis for understanding the stability of geometric systems.
• The Art of Derivative: The student will practice extracting the instantaneous rate of change using advanced differentiation rules (Product, Quotient, and Chain Rules), with a strong focus on trigonometric and logarithmic functions that appear frequently in EmSAT exams.
• Real-world applications (Optimization): We will not be satisfied with paper-based solutions, but will learn how to use differentiation to find optimal solutions (maximum and minimum values), such as determining the shortest path or achieving the highest technical efficiency at the lowest possible cost.
• Introduction to Integration: We will lay the foundation for the science of integration by understanding the inverse relationship between differential and integral calculus, which will fully prepare the student for the Calculus 2 course.
Why choose this lesson?
We don't just solve equations; we aim to build an "analytical mindset." This approach simplifies complex concepts, connects them to practical realities, and equips students with smart strategies for tackling the most frequently asked exam questions in UAE university curricula, ensuring not just success, but excellence and an A grade.
Additional information for the student (more detailed):
• Prerequisites: The student should preferably have a good understanding of the basics of algebra and the ability to solve equations and inequalities.
• Required tools: A scientific calculator (preferably advanced models such as those allowed in EMAST), and a graph book to track the behavior of the curves.
• Session approach: We follow a strict and organized system of explanation based on progression from easy to difficult, while providing training examples that simulate actual final exams.

Muhammad

4.88

(85)

As a teaching assistant in the College of Engineering (specializing in Mechatronics Systems Engineering), I provide specialized academic support to engineering students to help them understand complex material, pass exams with distinction, and complete academic projects professionally.
I offer explanations and assistance in the following courses:
• Fluid Mechanics & Hydraulic/Pneumatic Control.
• Rigid Body Dynamics.
• Sensors and Data Acquisition Systems.
• Digital control machines and computer-aided design/manufacturing (CAD/CAM & CNC).
• Electric Machines & Drives.
• Renewable Energies.
In addition to theoretical explanations and worksheet solutions, I offer practical guidance in using engineering software (such as MATLAB and ANSYS) and assistance with graduation projects and course projects (CAD modeling and CFD simulations). My goal is to simplify engineering concepts and connect them to practical applications.

Ammar

4.88

(85)

Engineering and design become much easier when analysis, geometry, technical representation, digital modelling, spatial reasoning, and visual communication are connected within one coherent problem-solving process.

I am a PhD-qualified engineer, university professor, researcher, technical trainer, designer, and multidisciplinary consultant with more than 30 years of experience across engineering, teaching, project work, CAD, technical drawing, 3D modelling, GIS, visualization, information systems, and professional problem solving.

This class provides a personalized pathway for school and university students, engineering and design learners, architects and technicians, researchers, professionals, career changers, and adult learners. Depending on your goals, we can focus deeply on one specialized area or connect several areas within a complete technical workflow.

PHYSICS & APPLIED ENGINEERING SCIENCE
• Mechanics: motion, forces, Newton’s laws, work, energy, momentum, and rotational motion
• Statics, dynamics, equilibrium, torque, and engineering applications
• Fluids, pressure, buoyancy, density, and basic fluid mechanics
• Heat, temperature, thermodynamics, and energy transfer
• Waves, oscillations, sound, optics, electricity, and magnetism according to the learner’s level
• Mathematical modelling of physical systems
• Units, dimensions, vectors, graphs, and interpretation of experimental or engineering data
• Connecting physical principles to engineering design, calculations, and real-world technical problems

CHEMISTRY & ENGINEERING MATERIALS
• Atomic structure, chemical bonding, molecular structure, and periodic trends
• Stoichiometry, chemical reactions, solutions, concentrations, gases, and equilibrium
• Acids, bases, oxidation-reduction, and introductory thermochemistry
• Properties and behaviour of engineering materials
• Metals, polymers, ceramics, composites, and material-selection principles when relevant
• Connecting chemical principles to materials, manufacturing, environmental, and engineering applications

ENGINEERING DESIGN & PROBLEM SOLVING
• Understanding and structuring engineering problems
• Translating requirements into technical objectives
• Identifying constraints, assumptions, variables, and criteria
• Engineering calculations and quantitative reasoning
• Applied mechanics and engineering fundamentals when relevant
• Dimensional reasoning and unit consistency
• Design alternatives and trade-off analysis
• Verification and reasonableness checking
• Engineering decision making
• Design methodology and iterative improvement
• Interpreting technical specifications
• Connecting analysis to drawings, models, and deliverables
• Engineering-management and multidisciplinary project contexts

AUTOCAD & TECHNICAL DRAFTING
• AutoCAD interface and efficient workflows
• Coordinate systems and precise geometric construction
• 2D drafting fundamentals
• Layers, properties, object organization, and standards
• Blocks and reusable drawing content
• Dimensions, annotations, text, and hatching
• Model space and paper space
• Layouts, viewports, scales, and plotting
• Technical drawing principles
• Reading and interpreting engineering drawings
• Plans, sections, elevations, and details
• Drawing organization and documentation quality
• Advanced drafting workflows
• AutoCAD 3D concepts when relevant
• Improving speed, accuracy, and drawing consistency

BIM & REVIT WORKFLOWS
• BIM concepts and model-based thinking
• Revit project organization
• Levels and grids
• Walls, floors, roofs, and building elements
• Doors, windows, components, and families
• Views, sections, elevations, and schedules
• Annotation and documentation workflows
• Sheets and presentation standards
• View templates and graphical consistency
• Family-library organization
• BIM coordination principles
• Connecting models to professional documentation
• Developing structured Revit templates and repeatable workflows

3D MODELLING & PARAMETRIC DESIGN
• 3D geometric thinking
• Curves, surfaces, solids, and meshes
• Constructive and feature-based modelling concepts
• Precision modelling
• Product and engineering geometry
• Architectural and spatial modelling
• Rhino 3D workflows
• Grasshopper and visual parametric thinking
• Parameters, relationships, dependencies, and constraints
• Algorithmic generation of geometry
• Reusable and adaptive design logic
• Design iterations and controlled variation
• SolidWorks and Inventor workflows when relevant
• 3D Studio Max and visualization contexts when relevant
• Connecting models to drawings, analysis, fabrication, or presentation

CAD/CAM & MANUFACTURING WORKFLOWS
• From CAD geometry to manufacturable components
• Design-for-manufacturing principles
• Introduction to CAM concepts and machining strategies
• CNC fundamentals, coordinate systems, tools, operations, and toolpaths when relevant
• SolidWorks CAD/CAM workflows
• Verification, simulation, and interpretation of manufacturing outputs

GIS, MAPPING & SPATIAL ANALYSIS
• Foundations of Geographic Information Systems
• Spatial data models
• Vector and raster concepts
• Coordinate systems and projections
• Georeferencing
• Spatial data collection and organization
• Attribute data and database relationships
• Geodatabases
• Selection and spatial queries
• Buffering, overlay, proximity, and spatial analysis
• Thematic mapping
• Cartographic principles
• Spatial patterns and decision support
• ArcGIS Desktop and ArcGIS Pro workflows when relevant
• Remote-sensing and imagery concepts when relevant
• Integrating maps, analysis, and professional reporting

GRAPHIC DESIGN & VISUAL COMMUNICATION
• Principles of visual communication
• Composition and layout
• Visual hierarchy
• Typography
• Colour and contrast
• Image preparation and editing
• Vector graphics and illustration
• Technical diagrams and infographics
• Maps and spatial presentation
• Engineering and architectural presentation
• Portfolio and project-board development
• Presentation graphics
• Adobe Photoshop workflows
• Adobe Illustrator workflows
• Adobe InDesign workflows
• Connecting technical accuracy with visual clarity

Depending on your objectives, practical work may involve AutoCAD, Revit, BIM workflows, Rhino, Grasshopper, SolidWorks, Inventor, 3ds Max, ArcGIS Desktop, ArcGIS Pro, QGIS, Adobe Photoshop, Illustrator, InDesign, SketchUp, Figma, Canva or other relevant technical and design tools.

My teaching approach follows a structured workflow:
define the problem → understand the requirements → analyze the constraints → develop the geometry or data structure → create the drawing, model, or spatial analysis → verify accuracy → refine the solution → communicate it clearly

I do not simply demonstrate isolated commands. I help you understand why a workflow is appropriate, how information should be structured, how accuracy can be verified, how alternative solutions can be evaluated, and how the final technical idea should be communicated professionally.

We can work with your course syllabus, engineering problem, technical drawing, CAD file, Revit/BIM model, 3D model, parametric definition, GIS dataset, map, design project, portfolio, graphic layout, or professional workflow challenge.

Whether you are learning your first CAD commands, solving an engineering problem, developing a BIM workflow, building a 3D or parametric model, conducting spatial analysis, or improving technical visual communication, I will adapt the sessions to your level, objectives, and pace.

My goal is to help you become an independent technical problem solver who can analyze, design, model, verify, visualize, and communicate solutions with confidence.

Baia

4.88

(85)

I'm a working MEP engineer, currently building Python automation for Revit workflows daily - plan checks, model coordination, and repetitive drafting tasks. I teach other engineers, architects, and BIM professionals how to do the same, using pyRevit and real project workflows, not toy examples.

Topics include:
pyRevit fundamentals and setup
Automating repetitive Revit tasks (model checks, plan generation, data extraction)
Writing custom scripts for your firm's specific workflows
Applying Python automation to real MEP/BIM projects

Julien

4.88

(85)

In-depth study of mathematical concepts up to post-baccalaureate level.

Application of problem-solving methods to engineering sciences.

Coaching to find YOUR learning method and succeed in all your exams

Computer skills refresher course

Learning 3D modeling and engineering software