Statics, Mechanics of material, Structure, design,

Translated by GoogleSee original

From 33 C$ /h

The course begins with a quick reminder of the static calculation of beams and the notion of stresses around a point,
followed by three chapters on the calculation of stresses and strains under the effect of shear force, bending moment, and torque. Then come four chapters on calculation methods such as the theorem of the virtual works, the area of moments method, the three-moment method, and lines of influence. And at the end, two chapters
are dedicated to the effect of axial loading covering the buckling design and the compound and deflected bending design.

Extra information

You have to use a scientific calculator

Location

Online from United Arab Emirates

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

French

English

Arabic

Skills

Mechanical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Statics, Mechanics and resistance of materials, metallic structure

31 C$ /h

The resistance of materials (RDM) is a particular discipline of continuum mechanics, allowing the calculation of the stresses and deformations in the structures of the different materials (machines, mechanical engineering, building and civil engineering).

RDM makes it possible to reduce the study of the global behavior of a structure (relationship between stresses — forces or moments — and displacements) to that of the local behavior of the materials composing it (relationship between stresses and deformations). The objective is to design the structure according to criteria of resistance, admissible deformation and acceptable financial cost.

When the stress intensity increases, there is first elastic deformation (the material deforms in proportion to the applied force and returns to its initial shape when the stress disappears), sometimes followed (depending on the ductility of the material) plastic deformation (the material does not return to its initial shape when the stress disappears, a residual deformation remains), and finally rupture (the stress exceeds the intrinsic resistance of the material).

Haider

5.0

(6)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered in

✔ Structural engineering
✔ Design
✔ Test method and technique
✔ Measurement technology
✔ FEA
✔ Fluid mechanics
✔ Hydromechanics
✔ Structural mechanics
✔ Fluid mechanics
✔ Electric drives
✔ Fluid dynamics
✔ MS Office (Word, PowerPoint, Excel, Visio, Project, Access, Outlook)

+ other subjects on request

When contacting please
Class / study / training and subject
notify!

I'm looking forward to your messages.

Alonso

5.0

(6)

I am a Full Professor of Mechanical Engineering with 30 years of experience in areas such as Strength of Materials, Stability, Physics (Kinematics and Dynamics), Statics, Elasticity, Solid Mechanics, Machine Elements, Stress Analysis, Structures and Advanced Materials Mechanics . I emphasize teaching through problem solving and practical applications.
The Strength of Materials classes include topics such as: Stress analysis. Axial load, bending, Torsion, Transverse load, Combined stresses, Stress transformation, Energy methods, Calculation of deflections in beams, statically indeterminate problems, buckling, shear center, compound bending and asymmetric bending, Castigliano's theorem, Mohr's method , Virtual work, Creep and Fracture Criteria, etc.

Reza

5.0

(6)

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB.

Some of the finite element modeling and numerical simulations I have worked on include:
- Multiscale finite element modeling for fatigue crack propagation in porous materials.
- Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper].
- Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles.
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials.
- Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions.

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Adam

5.0

(6)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

علاء

5.0

(6)

Principles of using visualization methods for geometric shapes, front, top, back, and side facades, with an explanation of drawing methods on paper, along with the use of appropriate tools for engineering drawing, for students of mechanical, architectural, and industrial engineering and all engineering disciplines that study the subject of engineering design and its principles. Designs for products of mechanical elements and components can be made to be ready for drawing through programs such as AutoCAD and then 3D printing to visualize the product and then manufacturing and production. The courses also contribute to understanding shapes and ways to deal with them with the required sizes and engineering details and the types of paper suitable for engineering drawing.

Mohamed

5.0

(6)

Hi,
I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success.

Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs.

Feel free to contact me for more information !

Yomna

5.0

(6)

This course explains how air interacts with bodies, from airfoils to aircraft.

Topics Covered:

Aerodynamic forces and moments
Airfoil theory and lift generation
Drag and pressure distribution
Subsonic and compressible aerodynamics
Boundary layers and flow separation

Applications:

Aircraft and drones
Automotive aerodynamics
Wind and performance analysis

Ahmd

5.0

(6)

Theory of Machines (also referred to as Mechanics of Machines) is a branch of Mechanical Engineering that studies the relative motion between machine parts and the forces acting upon them.
Core Branches
Kinematics: Focuses on the geometry of motion (displacement, velocity, acceleration) without considering the forces causing it.
Dynamics: Analyzes the forces and torques acting on parts. It is subdivided into Statics (forces at rest) and Kinetics (forces in motion).

Muhammad

5.0

(6)

As a teaching assistant in the College of Engineering (specializing in Mechatronics Systems Engineering), I provide specialized academic support to engineering students to help them understand complex material, pass exams with distinction, and complete academic projects professionally.
I offer explanations and assistance in the following courses:
• Fluid Mechanics & Hydraulic/Pneumatic Control.
• Rigid Body Dynamics.
• Sensors and Data Acquisition Systems.
• Digital control machines and computer-aided design/manufacturing (CAD/CAM & CNC).
• Electric Machines & Drives.
• Renewable Energies.
In addition to theoretical explanations and worksheet solutions, I offer practical guidance in using engineering software (such as MATLAB and ANSYS) and assistance with graduation projects and course projects (CAD modeling and CFD simulations). My goal is to simplify engineering concepts and connect them to practical applications.

Lucas

5.0

(6)

I am a PhD researcher at the University of Oxford, with an MRes from the University of Cambridge and research experience with Rolls-Royce.

I enjoy helping students build confidence in engineering, physics, and mathematics through clear explanations and a supportive, personalised approach. Whether you are preparing for exams, working through challenging coursework, or simply looking to strengthen your understanding, lessons are tailored to your goals and learning style.

My aim is not only to help you achieve better results, but also to develop the problem-solving skills and intuition that make technical subjects more enjoyable and rewarding.

Massimiliano

5.0

(6)

Struggling with your classes or upcoming exams?
I've been there too, and I can help with personalized one-to-one tutoring tailored to your needs. From one student to another, we'll focus on what you actually need to understand, improve, and succeed.

Youssef

5.0

(6)

Hello,
Welcome to my online interactive Solidworks design crash course.
In this course you'll learn everything you need to start your journey with solidworks.
You'll learn:
Sketching.
Modelling.
Assembling.
Working Drawings.
After this course you'll be able to continue on your own with no issues

طارق

5.0

(6)

Eleven years of experience, including both teaching and practical experience in the industry, along with a Bachelor's degree in Mechanical Engineering with a very good grade, have given me a very deep and accurate understanding of mechanical engineering concepts, in addition to extensive experience in the academic field due to my passing a very large number of exams and lessons, as well as teaching the material to my colleagues at the university and teaching it to secondary and university students.

I can confidently convey the concepts and principles of mechanical engineering to you in a way that suits your abilities, and I can address your problems in the following engineering subjects so that you will be able to pass any exam with distinction and excellence:
1- Principles of Mechanics
2- Calculus 1 + 2 + 3
3- Physics 1 + 2
4- Static
5- Dynamics
6- Fluid Mechanics
7- Heat transfer
8- Strength of material
9- Thermodynamics
10 - Mechanical Vibrations

You can contact me for more details before making your decision. You're most welcome.

Patricien

5.0

(6)

Master the complexities of Liquid Rocket Engine (LRE) design and analysis in this comprehensive, engineering-focused course. Led by an experienced aerospace engineer, this class breaks down advanced propulsion concepts into structured, practical lessons designed to build real-world design skills. You will dive deep into foundational propulsion topics, including thermodynamic cycles, injector configurations, and combustion element behavior. The course also features dedicated modules on turbomachinery, covering centrifugal pumps, impellers, inducers, and turbines. To bridge theory with industry practice, you will learn how to perform high-fidelity Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) specifically for rocket injectors and turbopump components. Additionally, you will master advanced 3D CAD design techniques using industry-standard software like SolidWorks and CATIA V5. Whether you are an engineering student or a practicing professional, this course will provide you with the exact tools needed to analyze and design liquid rocket components from scratch.

Derek

5.0

(6)

Patient, practical tuition in Maths, Physics and Engineering Science from a mechanical engineer and further-education lecturer. I support Scottish National, Higher and Advanced Higher courses, GCSE learners throughout England, college and university students, apprentices and adult learners. Lessons are tailored to your level and goals, with calculations explained step by step, regular checks for understanding, revision planning, exam technique and real-world engineering examples. Topics can include algebra, trigonometry, calculus, statistics, mechanics, thermodynamics, fluid mechanics, electrical circuits and applied engineering calculations. I hold a Bachelor’s Degree in Mechanical Engineering, have over 25 years of engineering experience, five years of teaching experience, and a current PVG disclosure. Tuition is available online and in person in Glasgow, Monday to Saturday.