Engineering Drawing (graphics) (Mechanical Drawing - AutoCAD - Inventor - SolidWorks)

From 25 C$ /h

Engineering drawings are used to communicate design ideas and technical information to engineers and other professionals throughout the design process. An engineering drawing represents a complex three-dimensional object on a two-dimensional piece of paper or computer screen by a process called projection.

Location

Online from Egypt

About Me

I have more than 14 years of experience in teaching and tutoring university students (face to face and online) at different levels and different education systems. I am an engineer and I got my Master degree and currently working on my PhD.
You can rely on me to let you understand then apply to get the outcomes of your lessons. Also, you can ask me to help you understand the required from exams and quizzes to make sure you will answer them correctly and get high scores on your own I promise because, this is what we do.

Education

Master of Science in Mechanical Engineering (Jul, 2017) - Faculty of engineering, Helwan university.
BSc in mechanical Engineering (Jul, 2010) - Faculty of engineering - Helwan university.

Experience / Qualifications

14 years of experience in teaching and tutoring university students (face to face and online) at different levels and different education systems.

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Arabic

Skills

Engineering

Mechanical engineering

Graphic design

Reviews

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Physics (Classical Mechanics) (Statics and Dynamics "Kinematics and Kinetics")

28 C$ /h

Statics and dynamics are the main subjects for level one engineering students.
You will understand these subjects perfectly.
Together, you will understand vectors, motion in multiple directions, relative motion, Newton's laws of motion, .... and simple harmonic motion.

Mechanics of Materials (Stress Analysis - strength of materials)

31 C$ /h

Mechanics of materials (or strength of materials) is a branch of engineering that analyzes the behavior of solid objects subject to various loads, focusing on deformation, stress, strain, and failure. It determines the internal resistance of components (e.g., beams, columns, shafts) to ensure structural safety. Key concepts include elasticity, plasticity, torsion, bending, and material stress-strain relationships.

Gaëlle

5.0

(3)

Most kids think coding is for "smart kids" or "future programmers."
It's not. Coding is how real people solve real problems.
In this class, we skip the theory. Your child creates real things.

What they'll do:
✓ Build real projects in Scratch: a working game, an interactive animation, a story they coded
✓ Program virtual robots: solve real-world challenges (navigate a maze, automate a task, build a system)
✓ Create in Minecraft Education: design worlds, automate constructions, solve logic problems
✓ Experiment with different languages: not just learn "the right way," but understand that there are many ways to think about a problem
✓ Collaborate and share: work with other kids, get feedback, improve their work
✓ Develop logical thinking: not just for coding, but for anything: solving math problems, science challenges, real-world situations

Why this is different:
We don't teach syntax. We teach how programmers think.
Most children's coding courses say "here's the code, copy it." We teach "what problem are we trying to solve? How could we break it into steps? What options do we have?"
When your child learns to think like a programmer, they can learn any language afterward.

What they take home:
A portfolio of 3–4 completed, working projects. The ability to say "I built this." And the deep understanding that code is a tool to make real things happen.

Format: Online or Barcelona | 60–90 min sessions | Flexible pace, no prior experience needed
For curious 8-12 year olds who want to build.

Reza

5.0

(3)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

My extensive teaching experience covers a wide range of engineering courses, including:

- Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics.

- Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more.

- Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc.

- CAD/CAM Software: Autocad, Solidworks.

- Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA.

My research and teaching interests are diverse, including:
• Additive manufacturing
• Mechanical metamaterials
• Acoustical metamaterials
• Electromagnetic metamaterials
• Aeroacoustics
• Soft matter and soft robotics
• Fatigue and fracture mechanics
• Experimental mechanics
• Multiscale numerical modelling
• Biomaterials
• Porous materials
• Manufacturing of medical devices and implants
• Deep learning
• Image processing
• Topology optimization
• Origami and Kirigami structures
• Self-folding and self-assembly structures
• Tissue engineering
• Permeability in porous materials
• Fluid-Solid Interaction

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Matías

5.0

(3)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Alonso

5.0

(3)

I am a Full Professor of Mechanical Engineering with 30 years of experience in areas such as Strength of Materials, Stability, Physics (Kinematics and Dynamics), Statics, Elasticity, Solid Mechanics, Machine Elements, Stress Analysis, Structures and Advanced Materials Mechanics . I emphasize teaching through problem solving and practical applications.
The Strength of Materials classes include topics such as: Stress analysis. Axial load, bending, Torsion, Transverse load, Combined stresses, Stress transformation, Energy methods, Calculation of deflections in beams, statically indeterminate problems, buckling, shear center, compound bending and asymmetric bending, Castigliano's theorem, Mohr's method , Virtual work, Creep and Fracture Criteria, etc.

Jeremy

5.0

(3)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have 6 years of experience teaching Physics and Maths to kids from unprivileged backgrounds both in a homework schools as well as via private teaching. In private teaching, I have experience tutoring people with learning disabilities (ADHD, Dyslexia, Discalculia and more), younger kids of ages 7-12 and older students preparing for their final baccalaureate exams in advanced maths/physics curriculums.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Adam

5.0

(3)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Nicolas

5.0

(3)

As a current Master's student in Aerospace Engineering at TU Delft, I have successfully navigated the entire Bachelor's curriculum and the competitive selection procedure, so I am fully equipped to guide you through the study plan and specific admission requirements. I offer personalized tutoring sessions designed to ensure comprehensive preparation for the entrance exams. These classes include a detailed review of key concepts in Mathematics and Physics, intensive practice with relevant exercises, and specific strategies to tackle the test effectively. I also place a dedicated focus on mastering the First Year Material (FYM) section (often the most challenging and unfamiliar part for applicants) to help you build the confidence and skills necessary to succeed. Furthermore, I am happy to discuss the degree program itself and explore the opportunities available in Delft to help you prepare for your future student life.

Ayoub

5.0

(3)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Lobna

5.0

(3)

In the era of artificial intelligence, it has become necessary to learn professional design programs to become a professional designer who cannot replace you

This is what I offer you in this

I am Lubna. I work in the field of graphic design and have work experience of more than 5 years. I have trained and held seminars on design.
However, I am studying marketing for online business students

I worked with companies, individuals, and clients

My motto is “Do not design, but find a solution.”

I will provide you with an explanation of all the tools - techniques - and applications to actual projects - and answers to all your questions.....

You will have a graduation project at the end of the lectures, and this will be your success in mastering the program

Explanation in Arabic

Let's defeat aı and be professional designers

Mohammad

5.0

(3)

PhD physicist and nuclear engineer with over 10 years of research experience at CERN and CNRS, offering tailored private lessons in physics and applied mathematics for university students and motivated high school students preparing for higher education.
I specialise in helping students build genuine understanding of the principles behind complex problems, not just memorise formulas for exams. My teaching adapts to your level, your pace, and your specific goals.
Topics I can cover include classical mechanics, thermodynamics, fluid mechanics, electromagnetism, quantum physics, nuclear physics, radiation physics, applied mathematics, differential equations, linear algebra, probability and statistics, and numerical methods.
I have a PhD in nuclear engineering from Université Grenoble Alpes, an MSc in nuclear plant design from Université Paris-Saclay, and a BSc in nuclear engineering. I have worked as a research fellow at CERN and as a doctoral researcher at CNRS, and I have supervised students and interns throughout my career.
Lessons are available online via video call or in person in Geneva. I am flexible on scheduling and happy to discuss your specific needs before we start.

Tahere

5.0

(3)

Online University Art and Design Portfolio Preparation.

Are you applying to university for a creative subject?

I offer personalised one-to-one online portfolio mentoring for students applying to art and design courses in the UK and internationally.

I am an experienced art educator, graphic designer and researcher with more than 30 years of teaching experience. Most recently, I taught international students at EF Academy Oxford, supporting learners from a wide range of cultural and educational backgrounds.

I am based in Oxford and can support students in university portfolio preparation to study Art, Graphic Design, Graphic Communication Design, Fashion Design, Architecture, Interior Design, Illustration, Photography, Textile Design, Product Design, Animation, Foundation Art and Design, and other creative programmes.

My guidance may include:

1- Developing original ideas and personal themes.
2- Strengthening sketchbooks and creative processes.
3- Developing creative ideas and experimenting with materials and techniques.
4- Strengthening drawing, painting, design and visual communication skills.
5- Selecting, refining and presenting work for university portfolios.
6- Personal-statement and interview preparation.
7- Understanding the expectations of UK art and design courses.

My approach is supportive, honest and individually tailored. I help students recognise what is already strong in their work and understand how to develop it further.

Portfolio preparation requires regular effort, so I work best with motivated students who are prepared to engage seriously with the creative process.

Online lessons are available internationally.

Baia

5.0

(3)

I'm a working MEP engineer, currently building Python automation for Revit workflows daily - plan checks, model coordination, and repetitive drafting tasks. I teach other engineers, architects, and BIM professionals how to do the same, using pyRevit and real project workflows, not toy examples.

Topics include:
pyRevit fundamentals and setup
Automating repetitive Revit tasks (model checks, plan generation, data extraction)
Writing custom scripts for your firm's specific workflows
Applying Python automation to real MEP/BIM projects

Yassine

5.0

(3)

As a tenured professor of Engineering Sciences, I help students succeed in exams and competitive entrance exams. I teach in preparatory classes (MPSI, MP, PSI, etc.) and up to the undergraduate level. My method: understand the material, practice rigorously, structure your reasoning, and tackle well-chosen exercises and problems. Each session includes targeted exercises, methodological advice, and personalized follow-up. You will receive a video recording and an annotated PDF after each lesson. Lessons are held online via Google Meet, 7 days a week, with flexible scheduling. I am available between sessions to answer questions. Contact me for an initial discussion.

Hend

5.0

(3)

In this lesson we cover the basics of statics, the science that studies stationary objects under the influence of different forces, and is the cornerstone of engineering subjects such as mechanics and construction.
What you will learn in this lesson:
• The concept of power, its types, and methods of representing it
• Analyzing forces into their components
Conditions for equilibrium of bodies
• Solve practical examples step by step
The lesson is suitable for engineering students of all specializations, and for anyone who wishes to build a strong understanding of the material before moving on to advanced subjects.

Alaaeldin

5.0

(3)

Learn PLAXIS 2D & 3D and Geotechnical Engineering with a PhD Researcher in France!

I am a PhD candidate in Geotechnical Engineering at the University of Lille, France, specializing in finite element modelling (FEM), soil–structure interaction, and advanced numerical simulations.

I offer personalized online lessons for civil engineering students, master's and PhD students, researchers, and practicing engineers.

What you can learn:

PLAXIS 2D & 3D
Getting started with PLAXIS and understanding the modelling workflow.
Geometry creation, soil layers, materials, and boundary conditions.
Soil constitutive models and parameter selection.
Mesh generation and staged construction.
Foundation settlement and soil–structure interaction.
Retaining walls, excavations, and underground structures.
Results interpretation and model validation.

Geotechnical Engineering

Soil Mechanics and Foundation Engineering.
Earth pressure and retaining structures.
Settlement and bearing capacity.
Soil–structure interaction.
Personalized Learning

Lessons are adapted to your experience, from beginner to advanced level. We can work through practical examples, discuss theoretical concepts, or review your own numerical models step by step.

My goal is to help you understand both the engineering principles and their practical implementation in numerical modelling software.

Lessons are available online in English, Arabic, or French.

Feel free to contact me to discuss your learning objectives and arrange a personalized lesson!