Mechanical, Industrial and Electrical Engineering. Giving private lessons for various subjects with the ability to understand.

Translated by GoogleSee original

From 29 C$ /h

Lessons for mechanical, industrial and electrical engineering students. Ability to understand and communicate information easily and smoothly, God willing. Five years of experience teaching engineering college courses at various universities in Saudi Arabia, Kuwait, Cairo and the Emirates. Holds a master's degree and a preliminary doctorate.

Extra information

Bring your complete note-taking and writing equipment.

Location

Online from Saudi Arabia

About Me

I work as an assistant professor at the Faculty of Engineering

5 years of experience teaching engineering college courses, in person or online.

PMP, RMP certified

Experience in preparing research papers, scientific publishing, and master's and doctoral theses.

Education

I work as an assistant professor in the College of Engineering, assistantship in Phd, Ms, BS.
I work as an assistant professor at the Faculty of Engineering

5 years of experience teaching engineering college courses, in person or online.

PMP, RMP certified

Experience in preparing research papers, scientific publishing, and master's and doctoral theses.

Experience / Qualifications

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Intermediate

Advanced

Duration

60 minutes

The class is taught in

Arabic

English

Skills

Mechanical engineering

Electrical engineering

Agricultural engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Alonso

4.85

(13)

I am a Full Professor of Mechanical Engineering with 30 years of experience in areas such as Strength of Materials, Stability, Physics (Kinematics and Dynamics), Statics, Elasticity, Solid Mechanics, Machine Elements, Stress Analysis, Structures and Advanced Materials Mechanics . I emphasize teaching through problem solving and practical applications.
The Strength of Materials classes include topics such as: Stress analysis. Axial load, bending, Torsion, Transverse load, Combined stresses, Stress transformation, Energy methods, Calculation of deflections in beams, statically indeterminate problems, buckling, shear center, compound bending and asymmetric bending, Castigliano's theorem, Mohr's method , Virtual work, Creep and Fracture Criteria, etc.

Reza

4.85

(13)

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB.

Some of the finite element modeling and numerical simulations I have worked on include:
- Multiscale finite element modeling for fatigue crack propagation in porous materials.
- Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper].
- Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles.
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials.
- Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions.

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Adam

4.85

(13)

..................................... (satisfied or refunded)........ .......
Electrical engineering expert
PhD student in electrical engineering and renewable energies
engineer in electrical engineering and industrial computing
I offer home schooling courses to deal with the difficulties encountered by students during their schooling,
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.
===Automatic (Servo-control and automatism regulation (discrete, continuous)========
===Electrical engineering (electrical machines) and power electronics (inverter rectifier)=======
===Continuous and sampled signal processing=================
===VHDL programming, microcontroller and microprocessor (intel, ARM)============
===High frequency electronics (transistor, diode, AOP, noise)============
===Propagation of electromagnetic waves and antennas========
===Analog and digital electronics (filters, flip-flops, sysml,Grafcet,amplifier)=====
=== Realization of electrical projects
===MATLAB ARDUINO Proteus ISIS
=== Renewable energies

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This pedagogical approach is effective since it has often led me to interesting results with my students.

Tim

4.85

(13)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

Rayane

4.85

(13)

Mechanical Engineering courses can be hard to understand, considering that most of the subjects require a deep understanding of the laws governing any phenomena, intense mathematical skills, and the ability to visualize concepts and ideas.
I am here to help you get through them as smoothly as possible, with one-on-one Tutoring sessions, where we will get to dive deeper into any doubts and questions you might have, helping you ace your exams and finish any course smoothly.

Ali

4.85

(13)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

أحمد

4.85

(13)

Hello everyone and have a nice day,

As a teacher, teacher, student, teacher, professional teacher, and professional student/coaching/unterstützung in MATLAB/Simulink/embedded programme/automatic code generation...etc., you can also contact him.

Use this device for your Master Elektrotechnik-Ingenieur with a new academic design and installation tool in the basic model and use the Matlab/Simulink-Model for embedded System and Regelung on the E-Motoren with a fan and pass it. and Anforderungen.

For more information, please contact us. Unterstützung professionelle in Matlab, Simulink, C, Microcontroller and embedded Programmierung an.

There is a lot of expertise in this article, too:
- Matlab, Simulink,
- S-Functions, Simulink Modelle, Model Basierte Programmierung and Code Generation,
- Electrical drives and E-Motoren,
- STM32 Microcontroller,
- Rapid Prototyping mittels dSPACE HiL-Systeme and Echtzeit-Systeme,
- Power electronics / Leistungselektronik,
- Betreuung and Unterstützung während verschiedenenenenenen der projecterbeiten,
- ...

There is a lot of contact with you.

Very nice greetings

Yassine

4.85

(13)

Professeur agrégé de Sciences de l'ingénieur, j’aide élèves et étudiants à réussir examens et concours. J’interviens aux classes préparatoires (MPSI, MP, PSI...) et jusqu’à l’université (Licence ). Ma méthode : comprendre le cours, pratiquer avec rigueur, structurer le raisonnement et attaquer des exercices et problèmes bien choisis. Chaque séance inclut exercices ciblés, conseils méthodologiques, et suivi personnalisé. Vous recevez un enregistrement vidéo plus un PDF annoté après chaque cours. Cours en ligne via Google Meet, 7 jours sur 7, avec flexibilité horaire. Je reste joignable entre les séances pour répondre aux questions. Contactez-moi pour un premier échange.

طارق

4.85

(13)

Eleven years of experience, including both teaching and practical experience in the industry, along with a Bachelor's degree in Mechanical Engineering with a very good grade, have given me a very deep and accurate understanding of mechanical engineering concepts, in addition to extensive experience in the academic field due to my passing a very large number of exams and lessons, as well as teaching the material to my colleagues at the university and teaching it to secondary and university students.

I can confidently convey the concepts and principles of mechanical engineering to you in a way that suits your abilities, and I can address your problems in the following engineering subjects so that you will be able to pass any exam with distinction and excellence:
1- Principles of Mechanics
2- Calculus 1 + 2 + 3
3- Physics 1 + 2
4- Static
5- Dynamics
6- Fluid Mechanics
7- Heat transfer
8- Strength of material
9- Thermodynamics
10 - Mechanical Vibrations

You can contact me for more details before making your decision. You're most welcome.

يحيى

4.85

(13)

Lesson title:
General Physics for University Students (Physics 101 & 102) - The Complete Guide to Mastering Concepts, Solving Complex Problems, and Guaranteeing A+ Exams

Detailed lesson description:
Do you feel that the general physics course is an obstacle to your academic achievement? Do you find it difficult to connect theoretical laws and apply them to complex exam problems in English? Do you suffer from time constraints during exams or difficulty in extracting data correctly?

Don't worry! This comprehensive and intensive course is specifically designed to be your first and complete reference for passing the General Physics I & II courses with the highest distinction (A+), and turning physics from a source of anxiety into a strength in your GPA.

---

First: Topics covered in the General Physics 1 course (Physics 101 - Mechanics and Heat):

1. Vectors and Physical Quantities:
Understanding scalar and vector quantities and their applications.
- Adding and subtracting vectors structurally and computationally (Vector Addition & Components).
- Standard multiplication and cross product (Dot Product & Cross Product) and their direct uses.

2. Movement in one dimension and two dimensions (Kinematics in 1D & 2D):
- Equations of motion with constant acceleration.
- Free Fall & Projectile Motion.
Uniform Circular Motion and Determination of Acquired Acceleration Directions.

3. Newton's Laws of Motion and their applications:
- Newton's first, second and third laws and the formulation of the free-body diagram.
- Applying forces to different axes and dismantling the vehicles.
- Dealing with static and kinetic friction forces, inclined surfaces, and suspended masses.

4. Work, Energy & Conservation of Energy:
- Calculating the work done by constant and variable forces.
- Kinetic and Potential Energy.
- The principle of conservation of mechanical energy and its applications in the presence and absence of friction.

5. Linear Momentum & Collisions:
- Definition of momentum and calculation of impulse (Momentum & Impulse).
- Elastic and inelastic collisions in one dimension and two dimensions (Elastic & Inelastic Collisions).
- Calculating the center of mass for systems and particle systems.

6. Rotational Motion and Torque:
- Speed, angular acceleration, and the relationship between them and linear quantities.
- Bending moment, shear moment, and inertia moment.
- Applying Newton’s second law to rotational motion and the conservation of angular momentum.

---

Second: Topics covered in the General Physics 2 course (Physics 102 - Electricity and Magnetism):

1. Electric Charge and Coulomb's Law:
- Properties of electric charges and the laws of attraction and repulsion.
- Calculating the net electric force resulting from a group of point charges (Superposition Principle).

2. Electric Field and Gauss's Law:
- Calculating the electric field strength for point charges and continuous charge distributions.
- Electric flux and applications of Digges' law to spherical, cylindrical and planar surfaces.

3. Electrical Potential and Potential Energy:
- The difference in electrical potential and the work done to move the charges.
- Calculating the electrical potential resulting from the different distributions of conductive and insulating surfaces.

4. Capacitors and Dielectrics:
- Capacitor capacity and methods of connecting capacitors in series and parallel (Series & Parallel Capacitors).
- Energy stored in the electric field and the effect of introducing dielectric materials on capacitance and voltage.

5. Electric current and electrical circuits (Current, Resistance & DC Circuits):
- Ohm's Law and the difference between resistance and resistivity.
- Analyzing complex electrical circuits using Kirchhoff's Voltage & Current Laws.
- Capacitor charging and discharging circuits (RC Circuits).

6. Magnetic Field and Magnetic Forces:
- The magnetic force acting on moving charges and wires through which a current flows (Lorentz Force).
- The movement of charges in uniform magnetic fields.
- Biot-Savart Law and Ampere's Law for calculating magnetic fields.

---

Advantages of the teaching method and services provided in this course:

* Simplifying and deconstructing concepts: Transforming complex laws and dry theories into simplified ideas explained in Arabic while maintaining complete directness and professionalism in dealing with English terminology.
* Exam-style training: Solving hundreds of problems and concepts ranging from beginner to advanced levels and levels for outstanding students.
* Solving Past Papers: A comprehensive review of past years’ questions from various universities and coverage of midterm and final exam concepts.
Overcoming the obstacle of multiple choice (MCQs): Introducing critical thinking strategies, quick problem-solving, and techniques for eliminating incorrect answers to deal with time pressure in electronic and paper tests.
* Support and follow-up: Answering student inquiries, explaining school and university assignments (Assignments & Homeworks), clarifying weaknesses and addressing them immediately.

Who is this course for?
This course is aimed at all first and second year students in engineering colleges (mechanical, electrical, civil, aviation, computer), science college students (physics, mathematics, chemistry), technological and technical college students, and every student who seeks to break the barrier of fear of physics and reach the top by obtaining the highest grade.

Keywords (Tags):
Physics 101, Physics 102, General Physics, University Physics, Physics 101, Physics 102, Mechanics, Electricity and Magnetism, Engineering, University, Physics Exams, Physics Problem Solving, Past Papers, Calculus-based Physics, Coulomb, Newton, Kirchhoff, Diving, Piots Savar, EmSAT, Physics Tests, University Physics Explanation, Physics Questions and Answers, Physics Homework, General Physics I, General Physics II

Derek

4.85

(13)

Patient, practical tuition in Maths, Physics and Engineering Science from a mechanical engineer and further-education lecturer. I support Scottish National, Higher and Advanced Higher courses, GCSE learners throughout England, college and university students, apprentices and adult learners. Lessons are tailored to your level and goals, with calculations explained step by step, regular checks for understanding, revision planning, exam technique and real-world engineering examples. Topics can include algebra, trigonometry, calculus, statistics, mechanics, thermodynamics, fluid mechanics, electrical circuits and applied engineering calculations. I hold a Bachelor’s Degree in Mechanical Engineering, have over 25 years of engineering experience, five years of teaching experience, and a current PVG disclosure. Tuition is available online and in person in Glasgow, Monday to Saturday.

Mayank

4.85

(13)

In this 30-minute class, we will understand the two core components of a microprocessor: the ALU (Arithmetic Logic Unit) and the Control Unit. I will explain their structure, functions, and how they work together to execute instructions, using simple diagrams and practical examples. The goal is to build a clear understanding of how a microprocessor processes and controls data.

Sergio

4.85

(13)

I am Sergio, an Agricultural Engineering student at the Autonomous University of Nuevo León, currently on academic exchange at the University of Castilla-La Mancha.

During my training I have worked with AutoCAD, irrigation system design, drafting plans, topographic surveys and agricultural installations.

I offer online AutoCAD 2D classes aimed primarily at engineering students and other technical students who need to learn how to use the program or reinforce their knowledge to develop their own projects.

The classes are practical and personalized. We can start from the fundamentals of the program or work with the knowledge you already have, using exercises related to your studies.

My goal is for you to learn how to use the tools, understand the procedures, and develop the ability to create your plans independently.

I also offer academic support in Agronomic Engineering subjects related to irrigation, fertilization, topography and plant production, according to the syllabus and the student's needs.

Individual online classes, available Monday to Friday.