Mechanics of Machines, Theory of Machines or Mechanism and Machine Theory

From 30 C$ /h

Theory of Machines (also referred to as Mechanics of Machines) is a branch of Mechanical Engineering that studies the relative motion between machine parts and the forces acting upon them.
Core Branches
Kinematics: Focuses on the geometry of motion (displacement, velocity, acceleration) without considering the forces causing it.
Dynamics: Analyzes the forces and torques acting on parts. It is subdivided into Statics (forces at rest) and Kinetics (forces in motion).

Location

Online from Egypt

About Me

I have more than 14 years of experience in teaching and tutoring university students (face to face and online) at different levels and different education systems. I am an engineer and I got my Master degree and currently working on my PhD.
You can rely on me to let you understand then apply to get the outcomes of your lessons. Also, you can ask me to help you understand the required from exams and quizzes to make sure you will answer them correctly and get high scores on your own I promise because, this is what we do.

Education

Master of Science in Mechanical Engineering (Jul, 2017) - Faculty of engineering, Helwan university.
BSc in mechanical Engineering (Jul, 2010) - Faculty of engineering - Helwan university.

Experience / Qualifications

14 years of experience in teaching and tutoring university students (face to face and online) at different levels and different education systems.

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Arabic

Skills

Engineering

Mechanical engineering

Industrial engineering

Reviews

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Physics (Classical Mechanics) (Statics and Dynamics "Kinematics and Kinetics")

27 C$ /h

Statics and dynamics are the main subjects for level one engineering students.
You will understand these subjects perfectly.
Together, you will understand vectors, motion in multiple directions, relative motion, Newton's laws of motion, .... and simple harmonic motion.

Engineering Drawing (graphics) (Mechanical Drawing - AutoCAD - Inventor - SolidWorks)

24 C$ /h

Engineering drawings are used to communicate design ideas and technical information to engineers and other professionals throughout the design process. An engineering drawing represents a complex three-dimensional object on a two-dimensional piece of paper or computer screen by a process called projection.

Reza

4.64

(25)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

My extensive teaching experience covers a wide range of engineering courses, including:

- Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics.

- Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more.

- Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc.

- CAD/CAM Software: Autocad, Solidworks.

- Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA.

My research and teaching interests are diverse, including:
• Additive manufacturing
• Mechanical metamaterials
• Acoustical metamaterials
• Electromagnetic metamaterials
• Aeroacoustics
• Soft matter and soft robotics
• Fatigue and fracture mechanics
• Experimental mechanics
• Multiscale numerical modelling
• Biomaterials
• Porous materials
• Manufacturing of medical devices and implants
• Deep learning
• Image processing
• Topology optimization
• Origami and Kirigami structures
• Self-folding and self-assembly structures
• Tissue engineering
• Permeability in porous materials
• Fluid-Solid Interaction

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Matías

4.64

(25)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Alonso

4.64

(25)

I am a Full Professor of Mechanical Engineering with 30 years of experience in areas such as Strength of Materials, Stability, Physics (Kinematics and Dynamics), Statics, Elasticity, Solid Mechanics, Machine Elements, Stress Analysis, Structures and Advanced Materials Mechanics . I emphasize teaching through problem solving and practical applications.
The Strength of Materials classes include topics such as: Stress analysis. Axial load, bending, Torsion, Transverse load, Combined stresses, Stress transformation, Energy methods, Calculation of deflections in beams, statically indeterminate problems, buckling, shear center, compound bending and asymmetric bending, Castigliano's theorem, Mohr's method , Virtual work, Creep and Fracture Criteria, etc.

Abdelali

4.64

(25)

Hello, I am an electrical engineer having an extensive experience as a professor in higher education in engineering science and electrical engineering, as well as great experience as an embedded systems engineer, in EE architecture, ADAS, Testing and validations in the automotive sector.

I offer support courses and training in engineering science subjects, particularly in Automation and Industrial Control, to graduate students. My methodology is based on the acquisition of knowledge and course concepts in a very simple manner and also on practical experience using the most widely used software on the market.

Automation is the discipline that, generally speaking, deals with the control of systems. It is therefore very important in the industrial field, to which it provides solutions, study methods, and systematic analysis approaches. It is a scientific discipline that studies dynamic systems, signals, and information for the purposes of control or decision-making.

This course consists of six chapters, divided as follows:

Chapter 1: Introduction to Automation & Controlled Systems
Chapter 2: Mathematical Modeling of Controlled Systems
Chapter 3: Time & Frequency Analysis of Controlled Systems
Chapter 4: Controlling Systems & Block Diagram Algebra
Chapter 5: Stability & Performance of Controlled Systems
Chapter 6: Correction and Regulation of Controlled Systems

Jeremy

4.64

(25)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have 5 years of experience teaching Physics and Maths to kids from unprivileged backgrounds both in a homework schools as well as via private teaching. In private teaching, I have experience tutoring people with learning disabilities (ADHD, Dyslexia, Discalculia and more), younger kids of ages 7-12 and older students preparing for their final baccalaureate exams in advanced maths/physics curriculums.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Adam

4.64

(25)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Tim

4.64

(25)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

Samaa

4.64

(25)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

Ayoub

4.64

(25)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Roland

4.64

(25)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. As it is highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A major part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduate Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of experience and knowledge of the program to help you out with the right preparation to get in. Over the last four years, I have helped tens of students secure a spot! Moreover, I offer a free personalised lesson plan for each student, which is fully based on the admission syllabus and past exams, to ensure an even higher chance of admission for each student.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will become more effective and accurate. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, the city of Delft, what to expect from the study and whether it is the right fit for you.

Yomna

4.64

(25)

This course is designed to guide students through all levels of thermodynamics and heat transfer, from foundational concepts to advanced engineering applications. Whether you’re just starting university, struggling with basics, or preparing for advanced courses, this course will simplify complex topics step by step, using the same strategies I used as a student.

You can select the lesson option that fits your level and needs:

1) Thermodynamics (Introductory)
-Focus on fundamental thermodynamic concepts
-Learn about energy, work, heat, and the laws of thermodynamics
-Ideal for first-year engineering students or high school students preparing for university
-Build a strong foundation for advanced courses

2) Advanced Thermodynamics & Energy Systems
-Dive into entropy, cycles, and real-world applications
-Explore Carnot, Rankine, and refrigeration cycles
-Suitable for students with basic thermodynamics knowledge who want to tackle advanced problems
-Gain confidence for exams and engineering projects

3) Heat Transfer
-Understand how heat moves: conduction, convection, radiation
-Learn formulas and solve real-world heat transfer problems
-Perfect for students in mechanical, aerospace, or energy-focused courses
-Apply theory directly to engineering systems and projects

Ammar

4.64

(25)

Engineering and design become much easier when analysis, geometry, technical representation, digital modelling, spatial reasoning, and visual communication are connected within one coherent problem-solving process.

I am a PhD-qualified engineer, university professor, researcher, technical trainer, designer, and multidisciplinary consultant with more than 30 years of experience across engineering, teaching, project work, CAD, technical drawing, 3D modelling, GIS, visualization, information systems, and professional problem solving.

This class provides a personalized pathway for school and university students, engineering and design learners, architects and technicians, researchers, professionals, career changers, and adult learners. Depending on your goals, we can focus deeply on one specialized area or connect several areas within a complete technical workflow.

PHYSICS & APPLIED ENGINEERING SCIENCE
• Mechanics: motion, forces, Newton’s laws, work, energy, momentum, and rotational motion
• Statics, dynamics, equilibrium, torque, and engineering applications
• Fluids, pressure, buoyancy, density, and basic fluid mechanics
• Heat, temperature, thermodynamics, and energy transfer
• Waves, oscillations, sound, optics, electricity, and magnetism according to the learner’s level
• Mathematical modelling of physical systems
• Units, dimensions, vectors, graphs, and interpretation of experimental or engineering data
• Connecting physical principles to engineering design, calculations, and real-world technical problems

CHEMISTRY & ENGINEERING MATERIALS
• Atomic structure, chemical bonding, molecular structure, and periodic trends
• Stoichiometry, chemical reactions, solutions, concentrations, gases, and equilibrium
• Acids, bases, oxidation-reduction, and introductory thermochemistry
• Properties and behaviour of engineering materials
• Metals, polymers, ceramics, composites, and material-selection principles when relevant
• Connecting chemical principles to materials, manufacturing, environmental, and engineering applications

ENGINEERING DESIGN & PROBLEM SOLVING
• Understanding and structuring engineering problems
• Translating requirements into technical objectives
• Identifying constraints, assumptions, variables, and criteria
• Engineering calculations and quantitative reasoning
• Applied mechanics and engineering fundamentals when relevant
• Dimensional reasoning and unit consistency
• Design alternatives and trade-off analysis
• Verification and reasonableness checking
• Engineering decision making
• Design methodology and iterative improvement
• Interpreting technical specifications
• Connecting analysis to drawings, models, and deliverables
• Engineering-management and multidisciplinary project contexts

AUTOCAD & TECHNICAL DRAFTING
• AutoCAD interface and efficient workflows
• Coordinate systems and precise geometric construction
• 2D drafting fundamentals
• Layers, properties, object organization, and standards
• Blocks and reusable drawing content
• Dimensions, annotations, text, and hatching
• Model space and paper space
• Layouts, viewports, scales, and plotting
• Technical drawing principles
• Reading and interpreting engineering drawings
• Plans, sections, elevations, and details
• Drawing organization and documentation quality
• Advanced drafting workflows
• AutoCAD 3D concepts when relevant
• Improving speed, accuracy, and drawing consistency

BIM & REVIT WORKFLOWS
• BIM concepts and model-based thinking
• Revit project organization
• Levels and grids
• Walls, floors, roofs, and building elements
• Doors, windows, components, and families
• Views, sections, elevations, and schedules
• Annotation and documentation workflows
• Sheets and presentation standards
• View templates and graphical consistency
• Family-library organization
• BIM coordination principles
• Connecting models to professional documentation
• Developing structured Revit templates and repeatable workflows

3D MODELLING & PARAMETRIC DESIGN
• 3D geometric thinking
• Curves, surfaces, solids, and meshes
• Constructive and feature-based modelling concepts
• Precision modelling
• Product and engineering geometry
• Architectural and spatial modelling
• Rhino 3D workflows
• Grasshopper and visual parametric thinking
• Parameters, relationships, dependencies, and constraints
• Algorithmic generation of geometry
• Reusable and adaptive design logic
• Design iterations and controlled variation
• SolidWorks and Inventor workflows when relevant
• 3D Studio Max and visualization contexts when relevant
• Connecting models to drawings, analysis, fabrication, or presentation

CAD/CAM & MANUFACTURING WORKFLOWS
• From CAD geometry to manufacturable components
• Design-for-manufacturing principles
• Introduction to CAM concepts and machining strategies
• CNC fundamentals, coordinate systems, tools, operations, and toolpaths when relevant
• SolidWorks CAD/CAM workflows
• Verification, simulation, and interpretation of manufacturing outputs

GIS, MAPPING & SPATIAL ANALYSIS
• Foundations of Geographic Information Systems
• Spatial data models
• Vector and raster concepts
• Coordinate systems and projections
• Georeferencing
• Spatial data collection and organization
• Attribute data and database relationships
• Geodatabases
• Selection and spatial queries
• Buffering, overlay, proximity, and spatial analysis
• Thematic mapping
• Cartographic principles
• Spatial patterns and decision support
• ArcGIS Desktop and ArcGIS Pro workflows when relevant
• Remote-sensing and imagery concepts when relevant
• Integrating maps, analysis, and professional reporting

GRAPHIC DESIGN & VISUAL COMMUNICATION
• Principles of visual communication
• Composition and layout
• Visual hierarchy
• Typography
• Colour and contrast
• Image preparation and editing
• Vector graphics and illustration
• Technical diagrams and infographics
• Maps and spatial presentation
• Engineering and architectural presentation
• Portfolio and project-board development
• Presentation graphics
• Adobe Photoshop workflows
• Adobe Illustrator workflows
• Adobe InDesign workflows
• Connecting technical accuracy with visual clarity

Depending on your objectives, practical work may involve AutoCAD, Revit, BIM workflows, Rhino, Grasshopper, SolidWorks, Inventor, 3ds Max, ArcGIS Desktop, ArcGIS Pro, QGIS, Adobe Photoshop, Illustrator, InDesign, SketchUp, Figma, Canva or other relevant technical and design tools.

My teaching approach follows a structured workflow:
define the problem → understand the requirements → analyze the constraints → develop the geometry or data structure → create the drawing, model, or spatial analysis → verify accuracy → refine the solution → communicate it clearly

I do not simply demonstrate isolated commands. I help you understand why a workflow is appropriate, how information should be structured, how accuracy can be verified, how alternative solutions can be evaluated, and how the final technical idea should be communicated professionally.

We can work with your course syllabus, engineering problem, technical drawing, CAD file, Revit/BIM model, 3D model, parametric definition, GIS dataset, map, design project, portfolio, graphic layout, or professional workflow challenge.

Whether you are learning your first CAD commands, solving an engineering problem, developing a BIM workflow, building a 3D or parametric model, conducting spatial analysis, or improving technical visual communication, I will adapt the sessions to your level, objectives, and pace.

My goal is to help you become an independent technical problem solver who can analyze, design, model, verify, visualize, and communicate solutions with confidence.

Abdelmalek

4.64

(25)

Master Industrial Control Systems (SCADA, DCS, IIoT) and automation through tailored, hands-on coaching based on real-world industrial projects! With over 10 years of international engineering, solution architecture, and technical business development experience working with major industry vendors

I offer practical courses designed for engineering students, university undergraduates, and professionals looking to upskill.

The pathway will be in 7 days to cover all basics in OT environnement :
Day 1 - Virtual Environment Preparation for OT projects
- Install Hypervisor on your workstation (A virtual machine).
- Create a Linux VM (Fedora Server).
- Configure 2 networks on the VM: one in NAT (internet access) and one in Host-Only Network (to isolate lab traffic).
- Install basic tools for OT
Day 2: Modbus PLC Simulation (Add 2 Server and test script client to connect)
- Implement Modbus PLC simulators and architecture overview
- Create PLC simulator scripts in src/plc-simulators/
- Add validation test script for Modbus connectivity
- Update Day 2 guide with detailed implementation steps and compatibility notes
Day 3: NGINX Load Balancer Configuration (Round Robin)
- Understand NGINX Stream Module
- Configure NGINX
- Verify and Load the Module
- Troubleshooting NGINX (Activate load balancing in layer 4 protocol, Set permission)
- Step-by-Step Load Balancer Validation
- Test Load Balancing (Round-Robin)
- Test Failover (Resilience)
Day 4 - Creation of the traffic generator (SCADA Client)
- TBD
Day 5 - Traffic capture and measurement with TShark
TBD
Day 6 - Advanced analysis and overload simulation
TBD
Day 7 - Grafana
-TBD
What we can cover together based on your goals:

Baia

4.64

(25)

I'm a working MEP engineer, currently building Python automation for Revit workflows daily - plan checks, model coordination, and repetitive drafting tasks. I teach other engineers, architects, and BIM professionals how to do the same, using pyRevit and real project workflows, not toy examples.

Topics include:
pyRevit fundamentals and setup
Automating repetitive Revit tasks (model checks, plan generation, data extraction)
Writing custom scripts for your firm's specific workflows
Applying Python automation to real MEP/BIM projects

Reza

4.64

(25)

📐 Learn Calculus Without the Confusion — Step by Step!

Does calculus sometimes feel like a collection of complicated formulas that are difficult to remember?

Maybe you've learned the rules for derivatives or integrals, but you're not really sure why they work or when to use them.

Don't worry — you're not alone! 😊

I'm Reza, a Computer Engineer, teacher, and technology enthusiast. I enjoy teaching mathematics and technical subjects by breaking difficult ideas into smaller, easier-to-understand pieces.

My goal isn't to make you memorize a lot of formulas. I want you to understand calculus and become confident solving problems on your own.

📚 What can we learn together?

Depending on your level, course, and goals, we can work on topics such as:

Functions and graphs
Limits and continuity
Derivatives and differentiation
Rules of differentiation
Applications of derivatives
Related rates
Optimization problems
Curve sketching
Introduction to integration
Definite and indefinite integrals
Fundamental Theorem of Calculus
Applications of integrals
Mathematical problem-solving
Exam and homework preparation

If you're studying calculus at school, university, or as part of an engineering or computer science program, we can focus specifically on the topics you need.

🎯 How do I teach?

I believe calculus becomes much easier when you understand the idea before learning the formula.

That's why I usually start with an intuitive explanation, then work through examples together, and finally give you problems to solve yourself.

We'll take things step by step.

If you make a mistake, that's completely fine. In fact, mistakes are often one of the best ways to learn mathematics. We'll find out where the mistake happened, why it happened, and how to avoid it next time.

And please ask questions! There are no "stupid" questions in my classes. If something doesn't make sense, I'll try to explain it in a different way until it becomes clear.

👨‍🎓 Who is this class for?

This class can be suitable for:

High school students
University students
Engineering and Computer Science students
Students learning calculus for the first time
Students who want to strengthen their mathematical foundations
Students preparing for calculus exams
Students who need help with calculus homework or exercises
Anyone who wants to understand calculus rather than simply memorize formulas

I will adapt the lessons to your current level, your goals, and your learning pace.

💡 My teaching philosophy

For me, learning mathematics isn't about being "good at math."

It's about finding the right explanation, practicing enough, and gradually building your confidence.

You don't have to understand everything immediately.

We'll take it one concept at a time.

Understand → Practice → Make mistakes → Learn → Improve.

That's my approach to teaching.

🚀 Ready to make calculus easier?

Whether you're struggling with limits, derivatives, integrals, or simply want a stronger understanding of calculus, I'd be happy to help.

Let's stop being afraid of calculus and start understanding it. 😊

Learn Easy. Learn Smart. Let's solve it together! 📐