Online Engineering Tutor: Thermodynamics, Solid Mechanics, Dynamics, Control Systems and MATLAB with an Aerospace Graduate

From 68 C$ /h

Build a clear understanding of engineering and learn to solve problems independently. I am an Aerospace Engineering graduate from the Institute of Space Technology, Islamabad, offering online lessons for college and university students.

Topics include thermodynamics, solid mechanics and strength of materials, engineering dynamics, control systems and engineering materials. Where relevant, we use MATLAB and Simulink for modelling, simulation, plotting and checking results. Please send your syllabus or specific questions before booking so I can confirm the topic and level are a good fit.

A typical 60-minute lesson starts with a short review of your question and the concepts behind it. We identify assumptions, choose a diagram or mathematical model, and work through a representative problem step by step. You then try a related problem with feedback. We finish by reviewing the method, common mistakes and a focused practice target.

For exams, we can practise suitable past-paper questions and improve the structure of your working, units, sign conventions and interpretation. For coursework, I help you understand the brief, plan your method, debug your code and review your own reasoning so you can produce and explain your own work.

Lessons are online via webcam in English, Urdu or Punjabi. To discuss a lesson, message me through Apprentus with your course level, topic, deadline and any relevant materials.

Extra information

Before booking, please share your syllabus, topic and a sample question through Apprentus so I can confirm suitability. For the lesson, bring your notes, a way to write or annotate working, and MATLAB/Simulink if we have agreed to use it. Lesson times are agreed in advance; my time zone is Asia/Karachi (UTC+5).

Location

Online from Pakistan

About Me

I am Ali, an Aerospace Engineering graduate from the Institute of Space Technology, Islamabad. I provide online tutoring in engineering, engineering mathematics and technical problem solving for college and university students. My core areas include thermodynamics, solid mechanics, dynamics, control systems and MATLAB/Simulink.

My lessons connect physical meaning, diagrams and equations. We start with what you already understand, identify the specific gap, and work through a representative problem together. You then practise a similar problem with feedback. I pay attention to assumptions, units, sign conventions and checks that help you judge whether an answer makes sense.

Please share your course level, syllabus and the topics you want to cover through Apprentus before booking, so I can confirm that the lesson matches your needs. Lessons are online and can be taught in English, Urdu or Punjabi.

Education

BS Aerospace Engineering, Institute of Space Technology, Islamabad, 2026.

Relevant degree coursework includes engineering mechanics, thermodynamics, aerodynamics, control systems, flight dynamics and stability, numerical analysis, CAD, artificial intelligence, digital systems, and spacecraft dynamics and control.

Experience / Qualifications

I provide structured online tutoring for engineering and related technical subjects, including concept revision, guided problem solving and exam preparation. My aerospace engineering background helps me connect mathematical methods with physical systems, modelling and simulation.

I support students in understanding assignment briefs, planning their approach, reviewing their own work and finding errors. The aim is to help students develop the reasoning and confidence to complete their work independently.

Topics and software support are agreed after reviewing your materials. I can help with MATLAB/Simulink modelling, interpretation and debugging where these fit the course topic.

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Urdu

Panjabi

Skills

Engineering

Mechanical engineering

Thermodynamics

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Reza

4.64

(25)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

My extensive teaching experience covers a wide range of engineering courses, including:

- Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics.

- Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more.

- Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc.

- CAD/CAM Software: Autocad, Solidworks.

- Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA.

My research and teaching interests are diverse, including:
• Additive manufacturing
• Mechanical metamaterials
• Acoustical metamaterials
• Electromagnetic metamaterials
• Aeroacoustics
• Soft matter and soft robotics
• Fatigue and fracture mechanics
• Experimental mechanics
• Multiscale numerical modelling
• Biomaterials
• Porous materials
• Manufacturing of medical devices and implants
• Deep learning
• Image processing
• Topology optimization
• Origami and Kirigami structures
• Self-folding and self-assembly structures
• Tissue engineering
• Permeability in porous materials
• Fluid-Solid Interaction

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Matías

4.64

(25)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Haider

4.64

(25)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered in

✔ Structural engineering
✔ Design
✔ Test method and technique
✔ Measurement technology
✔ FEA
✔ Fluid mechanics
✔ Hydromechanics
✔ Structural mechanics
✔ Fluid mechanics
✔ Electric drives
✔ Fluid dynamics
✔ MS Office (Word, PowerPoint, Excel, Visio, Project, Access, Outlook)

+ other subjects on request

When contacting please
Class / study / training and subject
notify!

I'm looking forward to your messages.

Anh

4.64

(25)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Adam

4.64

(25)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Tim

4.64

(25)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

Samaa

4.64

(25)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

شريف

4.64

(25)

Specialized in teaching curricula and courses for male and female students of engineering faculties at all university levels. Bachelor’s, Master’s, Ph.D., Departments of Mechanics, Electricity, Mechatronics, and Aviation.
We also teach the same disciplines curricula to students of colleges and engineering and technical institutes.

Experience in teaching the curricula of all Gulf and Egyptian universities and universities in Britain and America for scholarship students.

Some of the curricula we teach are
Mathematics Electrical Circuits Physics Design Fluid Mechanics, Thermodynamics, Power Stations, Electrical Machines, MATLAB, SolidWorks, Algebra, Stereoscopic Engineering, Analytical Engineering, Integration of Control Differential and Theory of Machines, Hydraulic Circuits, Motors, Refrigeration and Air Conditioning, Aerodynamics, Mechanical Vibrations, Stress Analysis, Nuclear Heat Transfer Water desalination transmission and distribution networks
fluid mechanics thermodynamics physics, thermodynamics 1 and 2, thermo b, calculus, turbo diesel engines, calculus, integration, control and design of Fluid Turbo Machine and electrical circuits MATLAB thermodynamics fluid .aerodynamics heat transfer PLC mathematics matlab control power plant air conditioning system and refrigeration ice circuit ,thermo b vibration theory of machine robots Aerospace engineering aeronautics
CFD fluent ansis gambit solidworks electric machines stress analysis design
thermodynamics b fluid advanced mathematics aerodynamics heat and mass transfer PLC mathematics matlab control power plant air conditioning system numerical methods desalination hydraulic circuit and refrigeration nuclear energy calculus Saudi Aramco tests turbo machine Quadcopter Drones
FE course projects and more for mechanical engineering, electrical engineering civil
engineering industrial engineering mechatronics engineering

Some of the universities we teach are
Princess Nourah bint Abdulrahman University - PNU - Saudi ArabiaKING ABDULAZIZ UNIVERSITY - Saudi ArabiaDammam University (Imam Abdul Rahman bin Faisal) - (imam abdulrahman bin faisal university)University of Dammam - Saudi ArabiaKing Faisal University - King Faisal University - KuwaitUniversity of Kuwait - kuwait university - KuwaitKuwait College of Science & Technology - KuwaitEmirates College of Technology - Emirates College of Technology - United Arab EmiratesYanbu University College - Saudi ArabiaNYIT - New York Institute of Technology (NYIT) - United Arab EmiratesKing Fahd University of Petroleum and Minerals (KFUPM) - Saudi ArabiaThe Petroleum Institute (PI) - United Arab EmiratesThe American University of Kuwait - American University of Kuwait - KuwaitAmerican University of the Middle East - American University of the Middle East - KuwaitCanadian University Dubai (CUD) - United Arab EmiratesSultan Qaboos University - Sultan Qaboos University - Sultanate of OmanHigher College of Technology - Sultanate of OmanGerman University of Technology in Oman - GERMAN UNIVARCITY OF TECHNOLOGY IN OMAN - Sultanate of OmanUniversity of Nizwa - University of Nizwa - Sultanate of Oman
Kuwait University Hafr Al-Batin University Princess Nora Bint Abdul Rahman University King Abdulaziz University Jubail Industrial College Jubail University College Dammam University King Faisal University Kuwait College of Science and Technology Emirates College of Technology Yanbu University College Saudi Arabia New York Institute of Technology Petroleum Institute Saudi Aramco Exams King Fahd University of Petroleum and Minerals The British University, The American University in Kuwait, The American University of the Middle East, Kuwait
Canadian University, Dubai, Sultan Qaboos University, Sultanate of Oman, Higher College of Technology, Sultanate of Oman
The Russian University The German University The German University The University of Nizwa Qatar University Northwestern University in Qatar - Northwestern University in Qatar Texas A&M University at Qatar - QatarGeorgetown University in Qatar - QatarVirginia Commonwealth University in Qatar - Virginia Commonwealth University - Qatar - College of the North Atlantic Qatar - Qatar

Ayoub

4.64

(25)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Roland

4.64

(25)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. As it is highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A major part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduate Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of experience and knowledge of the program to help you out with the right preparation to get in. Over the last four years, I have helped tens of students secure a spot! Moreover, I offer a free personalised lesson plan for each student, which is fully based on the admission syllabus and past exams, to ensure an even higher chance of admission for each student.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will become more effective and accurate. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, the city of Delft, what to expect from the study and whether it is the right fit for you.

Intasar

4.64

(25)

I have graduated with a degree in chemical engineering from the University of Edinburgh, UK. I am also an Erasmus Mundus scholar with a master's in Analytical Chemistry from Uppsala University. Currently, I am pursuing a PhD in physical chemistry.

I have been tutoring since 2012 to fund my education expenses. I formally began tutoring in 2014 as part of my vocational training as a teacher in Ghana, funded by the University of Edinburgh. The formal training has taught me a lot about curriculum development, time management, and fusing my teaching methodology to my students’ needs. I have been tutoring in Physics, Chemistry, and Math, in person and online; the hybrid model has allowed me to reach out and teach students in 8 different countries. I have successful students from these past nine years who have not only commended my work ethic but can also stand testament to my enthusiasm.

My excellent academic career has nurtured in me a natural talent for teaching. My experiences have taught me how to tackle one problem at a time, and I believe that using this approach—paired with my unconventional examples that force students to think outside the box—I can truly provide an excellent understanding and explanation. My teaching methodology is based on two main things: skill development and adaptation. Initially, I create a skeleton of the most suitable methodology tailored to the preferred curriculum, after which, I adapt that lecture to the specific needs of the student based on their knowledge and grasp of the concepts. Second, I like to develop analytical and scientific ability along with knowledge in my students, and for that, I use a combination of resources in the form of worksheets, class tasks, and past papers. Last, I believe in the strong ethic of providing feedback to the parents, so that they are aware of their child’s progress.

Frequently Asked Questions:
Which subject(s) do you teach?
I teach math, mechanics, statistics, chemistry and physics. I also teach biology up to GCSE level.

When are you available? My timetable is quite flexible. I am happy to work weekdays, week evening and weekends.

Which ages and levels do you teach? The majority of my students are between the ages of 10-18, but I also teach college Students. I am also helping foundation and first year university students.

Which qualifications do you prepare your students for? GCSE, o-level, A/S-level, A-level, IB, School entrance exams and SATs

Describe your arrangements for online tutoring? I use Zoom online sessions since it has many tools and features specially designed for interactive and visual learning. I am fully equipped with modern gadgets for e-learning. I use Google drive and docs to share files.

Ammar

4.64

(25)

Engineering and design become much easier when analysis, geometry, technical representation, digital modelling, spatial reasoning, and visual communication are connected within one coherent problem-solving process.

I am a PhD-qualified engineer, university professor, researcher, technical trainer, designer, and multidisciplinary consultant with more than 30 years of experience across engineering, teaching, project work, CAD, technical drawing, 3D modelling, GIS, visualization, information systems, and professional problem solving.

This class provides a personalized pathway for school and university students, engineering and design learners, architects and technicians, researchers, professionals, career changers, and adult learners. Depending on your goals, we can focus deeply on one specialized area or connect several areas within a complete technical workflow.

PHYSICS & APPLIED ENGINEERING SCIENCE
• Mechanics: motion, forces, Newton’s laws, work, energy, momentum, and rotational motion
• Statics, dynamics, equilibrium, torque, and engineering applications
• Fluids, pressure, buoyancy, density, and basic fluid mechanics
• Heat, temperature, thermodynamics, and energy transfer
• Waves, oscillations, sound, optics, electricity, and magnetism according to the learner’s level
• Mathematical modelling of physical systems
• Units, dimensions, vectors, graphs, and interpretation of experimental or engineering data
• Connecting physical principles to engineering design, calculations, and real-world technical problems

CHEMISTRY & ENGINEERING MATERIALS
• Atomic structure, chemical bonding, molecular structure, and periodic trends
• Stoichiometry, chemical reactions, solutions, concentrations, gases, and equilibrium
• Acids, bases, oxidation-reduction, and introductory thermochemistry
• Properties and behaviour of engineering materials
• Metals, polymers, ceramics, composites, and material-selection principles when relevant
• Connecting chemical principles to materials, manufacturing, environmental, and engineering applications

ENGINEERING DESIGN & PROBLEM SOLVING
• Understanding and structuring engineering problems
• Translating requirements into technical objectives
• Identifying constraints, assumptions, variables, and criteria
• Engineering calculations and quantitative reasoning
• Applied mechanics and engineering fundamentals when relevant
• Dimensional reasoning and unit consistency
• Design alternatives and trade-off analysis
• Verification and reasonableness checking
• Engineering decision making
• Design methodology and iterative improvement
• Interpreting technical specifications
• Connecting analysis to drawings, models, and deliverables
• Engineering-management and multidisciplinary project contexts

AUTOCAD & TECHNICAL DRAFTING
• AutoCAD interface and efficient workflows
• Coordinate systems and precise geometric construction
• 2D drafting fundamentals
• Layers, properties, object organization, and standards
• Blocks and reusable drawing content
• Dimensions, annotations, text, and hatching
• Model space and paper space
• Layouts, viewports, scales, and plotting
• Technical drawing principles
• Reading and interpreting engineering drawings
• Plans, sections, elevations, and details
• Drawing organization and documentation quality
• Advanced drafting workflows
• AutoCAD 3D concepts when relevant
• Improving speed, accuracy, and drawing consistency

BIM & REVIT WORKFLOWS
• BIM concepts and model-based thinking
• Revit project organization
• Levels and grids
• Walls, floors, roofs, and building elements
• Doors, windows, components, and families
• Views, sections, elevations, and schedules
• Annotation and documentation workflows
• Sheets and presentation standards
• View templates and graphical consistency
• Family-library organization
• BIM coordination principles
• Connecting models to professional documentation
• Developing structured Revit templates and repeatable workflows

3D MODELLING & PARAMETRIC DESIGN
• 3D geometric thinking
• Curves, surfaces, solids, and meshes
• Constructive and feature-based modelling concepts
• Precision modelling
• Product and engineering geometry
• Architectural and spatial modelling
• Rhino 3D workflows
• Grasshopper and visual parametric thinking
• Parameters, relationships, dependencies, and constraints
• Algorithmic generation of geometry
• Reusable and adaptive design logic
• Design iterations and controlled variation
• SolidWorks and Inventor workflows when relevant
• 3D Studio Max and visualization contexts when relevant
• Connecting models to drawings, analysis, fabrication, or presentation

CAD/CAM & MANUFACTURING WORKFLOWS
• From CAD geometry to manufacturable components
• Design-for-manufacturing principles
• Introduction to CAM concepts and machining strategies
• CNC fundamentals, coordinate systems, tools, operations, and toolpaths when relevant
• SolidWorks CAD/CAM workflows
• Verification, simulation, and interpretation of manufacturing outputs

GIS, MAPPING & SPATIAL ANALYSIS
• Foundations of Geographic Information Systems
• Spatial data models
• Vector and raster concepts
• Coordinate systems and projections
• Georeferencing
• Spatial data collection and organization
• Attribute data and database relationships
• Geodatabases
• Selection and spatial queries
• Buffering, overlay, proximity, and spatial analysis
• Thematic mapping
• Cartographic principles
• Spatial patterns and decision support
• ArcGIS Desktop and ArcGIS Pro workflows when relevant
• Remote-sensing and imagery concepts when relevant
• Integrating maps, analysis, and professional reporting

GRAPHIC DESIGN & VISUAL COMMUNICATION
• Principles of visual communication
• Composition and layout
• Visual hierarchy
• Typography
• Colour and contrast
• Image preparation and editing
• Vector graphics and illustration
• Technical diagrams and infographics
• Maps and spatial presentation
• Engineering and architectural presentation
• Portfolio and project-board development
• Presentation graphics
• Adobe Photoshop workflows
• Adobe Illustrator workflows
• Adobe InDesign workflows
• Connecting technical accuracy with visual clarity

Depending on your objectives, practical work may involve AutoCAD, Revit, BIM workflows, Rhino, Grasshopper, SolidWorks, Inventor, 3ds Max, ArcGIS Desktop, ArcGIS Pro, QGIS, Adobe Photoshop, Illustrator, InDesign, SketchUp, Figma, Canva or other relevant technical and design tools.

My teaching approach follows a structured workflow:
define the problem → understand the requirements → analyze the constraints → develop the geometry or data structure → create the drawing, model, or spatial analysis → verify accuracy → refine the solution → communicate it clearly

I do not simply demonstrate isolated commands. I help you understand why a workflow is appropriate, how information should be structured, how accuracy can be verified, how alternative solutions can be evaluated, and how the final technical idea should be communicated professionally.

We can work with your course syllabus, engineering problem, technical drawing, CAD file, Revit/BIM model, 3D model, parametric definition, GIS dataset, map, design project, portfolio, graphic layout, or professional workflow challenge.

Whether you are learning your first CAD commands, solving an engineering problem, developing a BIM workflow, building a 3D or parametric model, conducting spatial analysis, or improving technical visual communication, I will adapt the sessions to your level, objectives, and pace.

My goal is to help you become an independent technical problem solver who can analyze, design, model, verify, visualize, and communicate solutions with confidence.

Ayah

4.64

(25)

This class is designed for engineering students who want to build a strong understanding of Engineering Statics and improve their problem-solving skills.

I am a PhD researcher in geotechnical engineering, and I specialize in simplifying complex concepts and helping students succeed in exams.
I will guide you step by step through fundamental concepts and practical applications, focusing on understanding the principles rather than memorizing equations.

This class is ideal for students who:

Find statics confusing
Want to improve your grades
Need clear explanations.
Need help solving engineering problems
Want to strengthen their fundamentals before advanced courses

Sessions are interactive and tailored to your level.

Baia

4.64

(25)

I'm a working MEP engineer, currently building Python automation for Revit workflows daily - plan checks, model coordination, and repetitive drafting tasks. I teach other engineers, architects, and BIM professionals how to do the same, using pyRevit and real project workflows, not toy examples.

Topics include:
pyRevit fundamentals and setup
Automating repetitive Revit tasks (model checks, plan generation, data extraction)
Writing custom scripts for your firm's specific workflows
Applying Python automation to real MEP/BIM projects

Yassine

4.64

(25)

As a tenured professor of Engineering Sciences, I help students succeed in exams and competitive entrance exams. I teach in preparatory classes (MPSI, MP, PSI, etc.) and up to the undergraduate level. My method: understand the material, practice rigorously, structure your reasoning, and tackle well-chosen exercises and problems. Each session includes targeted exercises, methodological advice, and personalized follow-up. You will receive a video recording and an annotated PDF after each lesson. Lessons are held online via Google Meet, 7 days a week, with flexible scheduling. I am available between sessions to answer questions. Contact me for an initial discussion.