Electrical engineering fundamentals basic circuits

Translated by GoogleSee original

From 24 C$ /h

1. Introduction to Electrical Circuits
• Basic concepts: charge, current, voltage, and power
• Passive and active circuit elements (resistors, capacitors, inductors, sources)
• Ohm’s Law and Kirchhoff’s Laws (KVL and KCL)

2. Circuit Analysis Techniques
• Series and parallel circuits
• Voltage and current division rules
• Node voltage method
• Mesh current method
• Source transformation
• Superposition theorem
• Thevenin’s and Norton’s theorems

3. Capacitors and Inductors
• Capacitance and inductance fundamentals
• Energy storage and release in capacitors and inductors
• Transient response in RC, RL, and RLC circuits
• Initial and final value theorems

4. First and Second-Order Circuits
• Natural and forced responses
• Step response analysis
• Time constants
• Overdamped, underdamped, and critically damped systems

5. Sinusoidal Steady-State Analysis
• AC sources and phasor representation
• Impedance and admittance
• AC circuit analysis using phasors
• Power in AC circuits: real, reactive, apparent power, and power factor

6. Frequency Response and Resonance
• Resonance in series and parallel RLC circuits
• Bandwidth and quality factor
• Bode plots (optional or advanced)

7. Three-Phase Circuits (Introductory Level)
• Star and Delta configurations
• Line and phase quantities
• Balanced three-phase power calculations

8. Circuit Simulation and Practical Applications
• Use of simulation tools such as PSPICE, Multisim, or MATLAB/Simulink
• Real-world applications and circuit design examples

Extra information

Location

Online from Egypt

About Me

I am an experienced electrical engineering teacher passionate about helping students understand complex concepts with clarity and practical examples. With a strong background in both theory and hands-on applications, I strive to make learning engaging and accessible. I focus on building a solid foundation in electrical circuits, power systems, and electronics, while encouraging critical thinking and problem-solving skills. My goal is to support each student's progress and prepare them for real-world engineering challenges.

Education

Cairo/Electrical power/PHD/ GPA3.95
• Over 10 years of teaching experience in higher education, delivering core and advanced courses such as Electrical Circuits, Power Systems, Electrical Machines, Renewable Energy Systems, and Control Systems
• Extensive experience in supervising undergraduate and postgraduate research projects in various fields of electrical engineering
• Strong background in simulation and analysis tools such as MATLAB/Simulink, PSCAD, ETAP, and AutoCAD Electrical
• Proven ability to design and conduct practical lab sessions, bridging the gap between theory and real-world applications
• Published multiple research papers in peer-reviewed journals and international conferences in the field of electrical engineering
• Dedicated to fostering a supportive and interactive learning environment that encourages student engagement and academic growth
• Regular participant in professional development programs, seminars, and engineering education workshops to stay updated with the latest teaching methodologies and technological advancements
• Excellent communication skills, with a clear and structured approach to explaining complex engineering concepts
• Passionate about inspiring the next generation of engineers through innovative teaching and mentorship

Experience / Qualifications

PhD in Electrical Engineering
• Over 10 years of teaching experience in higher education, delivering core and advanced courses such as Electrical Circuits, Power Systems, Electrical Machines, Renewable Energy Systems, and Control Systems
• Extensive experience in supervising undergraduate and postgraduate research projects in various fields of electrical engineering
• Strong background in simulation and analysis tools such as MATLAB/Simulink, PSCAD, ETAP, and AutoCAD Electrical
• Proven ability to design and conduct practical lab sessions, bridging the gap between theory and real-world applications
• Published multiple research papers in peer-reviewed journals and international conferences in the field of electrical engineering
• Dedicated to fostering a supportive and interactive learning environment that encourages student engagement and academic growth
• Regular participant in professional development programs, seminars, and engineering education workshops to stay updated with the latest teaching methodologies and technological advancements
• Excellent communication skills, with a clear and structured approach to explaining complex engineering concepts
• Passionate about inspiring the next generation of engineers through innovative teaching and mentorship

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

Arabic

English

Skills

Electrical engineering

Electronic circuits

Circus arts

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Electrical Circuits I, Electrical Circuits II, Digital Logic Design I, Matlab, Calculus I, Integration I, Arduino, Electrical Machines.

9 C$ /h

Teaching assistant at the Department of Electrical Engineering, Faculty of Engineering, Cairo University, and a former teacher at Notatee Kuwait, with two years of university teaching experience
I can help you explain and solve issues related to the branches of electrical engineering (electrical machines - energy conversion - renewable energy - electronic circuits - mechatronics - electrical circuits - high voltage - electrical protection - electrical forces - automatic control - MATLAB - ETAP - Arduino - Pscad -Protues - Tinkercad - Labview - Revit)

4.85

(13)

I offer teaching courses in electrical engineering and electronics (private lessons or holiday courses) to deal with the difficulties encountered by students during their schooling, as part of an individual follow-up that respects the rhythm specific to each.
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Anh

4.85

(13)

In these tailored Engineering sessions, I combine tutoring with mentoring to guide your technical understanding and foster your growth in key engineering concepts. My approach adapts to your natural learning style, ensuring that each lesson is intuitive, engaging, and effective.

With over 10 years of experience in Aerospace, Mechanical, and Electrical engineering, I bring a wealth of both academic and real-world expertise to our sessions. I’ll share insights from the Aerospace, Maritime, and Aviation industries to help you develop practical skills and problem-solving techniques, tailored to your needs.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

Or need help with areas like control systems or data analysis, I’m here to guide you through any engineering challenge. My lessons are customized to fit your learning style and academic goals, ensuring you leave each session feeling confident and prepared.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Adam

4.85

(13)

..................................... (satisfied or refunded)........ .......
Electrical engineering expert
PhD student in electrical engineering and renewable energies
engineer in electrical engineering and industrial computing
I offer home schooling courses to deal with the difficulties encountered by students during their schooling,
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.
===Automatic (Servo-control and automatism regulation (discrete, continuous)========
===Electrical engineering (electrical machines) and power electronics (inverter rectifier)=======
===Continuous and sampled signal processing=================
===VHDL programming, microcontroller and microprocessor (intel, ARM)============
===High frequency electronics (transistor, diode, AOP, noise)============
===Propagation of electromagnetic waves and antennas========
===Analog and digital electronics (filters, flip-flops, sysml,Grafcet,amplifier)=====
=== Realization of electrical projects
===MATLAB ARDUINO Proteus ISIS
=== Renewable energies

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This pedagogical approach is effective since it has often led me to interesting results with my students.

Yassine

4.85

(13)

Discover the world of robotics, electronics, and programming with a course designed for technology and innovation enthusiasts. Whether you are a beginner or already have some basics, this course will guide you through the fundamentals, with a hands-on approach to designing your own projects. You will learn how to use electronic components, program microcontrollers, and assemble robots to perform autonomous tasks.

Pierre

4.85

(13)

I adapt to the profile of each intern or student according to their objective and level.
The goal is not to work endless hours, but to show how to be able to work alone or partially independently in a short time.
It is always a pleasure for me to be recognized in the street 15 years after classes, and to be thanked for having provided a real service to the person concerned.
This activity is a passion of mine that I have been pursuing since I was 16 years old.
I hope to be able to share it with you to prepare effectively, by significantly reducing your legitimate apprehension of exams.

Ali

4.85

(13)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

Abdelmalek

4.85

(13)

- Modbus Protocol Introduction
- Modbus Frame Structure & Byte Analysis
- Modbus Exception Handling & Error Codes

Each module in this series is structured with core learning content followed by two mandatory practical components:
Challenge: A hands-on troubleshooting or design scenario to test your practical skills.
Audit: A checklist and verification quiz to ensure full mastery before moving to the next section.

Henoc

4.85

(13)

Electricity Teacher - Live Lessons from a Real Classroom

TIRED OF CLASSES IN FRONT OF A BLANK SHEET OF PAPER?

I give my lessons LIVE from a classroom with a blackboard and chalk.
Like at school, but with Google Meet at home.

FOR WHO ?
MIDDLE SCHOOL / HIGH SCHOOL: Circuits, laws, safety, reading diagrams
Vocational Baccalaureate: Power diagram, control diagram, wiring, installation
BTS: Industrial diagrams, motor starting, relays and contactors

MY METHOD:
We're working on YOUR exercises. I'll explain them to you step by step on the board.
Clear and concrete explanations with examples from construction sites.
You see everything I write and you leave with photos from the course.

HOW DOES IT WORK?
100% online course via Google Meet.
Professional quality: Sound + Image + Visible painting.
Opening hours: Evenings and weekends, French time.

Levels: Beginner to Advanced. First lesson to try it out.

Dhanush

4.85

(13)

Electrical engineering is a current trend and upcoming future necessity for people day to day life. so I will teach about how our electrical engineering help our day to day life and it remain use full and safe to our environment and people . People of this world must know about safety measures of electrical system. Also I will teach how to protect our environment and nature by using electrical engineering concept. The above content what I mentioned is learned by future students and taught by me.

Amir

4.85

(13)

Physics is a fascinating subject that helps us understand how the world around us works. As an experienced scientist with a passion for teaching and sharing science, I enjoy helping students develop a deeper and more intuitive understanding of physics. My lessons cover topics including classical mechanics, optics, electromagnetism, quantum mechanics, and quantum optics, and can be tailored to your level and learning goals. Whether you are preparing for an exam, studying at university, or simply curious about physics, I focus on clear explanations, problem-solving, and making even challenging concepts easier to understand.

Uma

4.85

(13)

Electronic, communication systems,electromagnetic fields , embedded system, digital electronic, digital signal processing, digital image processing,optical communication, signals and systems,applied electronics, microwave engineering,TLN,radio engineering

Mayank

4.85

(13)

In this 30-minute class, we will understand the two core components of a microprocessor: the ALU (Arithmetic Logic Unit) and the Control Unit. I will explain their structure, functions, and how they work together to execute instructions, using simple diagrams and practical examples. The goal is to build a clear understanding of how a microprocessor processes and controls data.

Hend

4.85

(13)

In this lesson we cover the basics of statics, the science that studies stationary objects under the influence of different forces, and is the cornerstone of engineering subjects such as mechanics and construction.
What you will learn in this lesson:
• The concept of power, its types, and methods of representing it
• Analyzing forces into their components
Conditions for equilibrium of bodies
• Solve practical examples step by step
The lesson is suitable for engineering students of all specializations, and for anyone who wishes to build a strong understanding of the material before moving on to advanced subjects.

Mohamed

4.85

(13)

Teaching electrical engineering online to university students

I offer online private lessons for engineering college students, focusing on simplifying engineering concepts, solving problems step by step, and practicing exam and project questions.

I help students understand the material from the ground up instead of relying on memorization, using practical examples, illustrations and simulations when needed.

The subjects I teach include:

Electrical Circuits
Electrical Machines
- Electrical Power Systems
Power System Protection
Electrical Installation & Distribution
Energy Conversion
Renewable Energy Systems
High Voltage and High Voltage Engineering
- Transformer stations and substations
- Electronics and basic electronic circuits
- Basic Control Systems
Engineering mathematics used in electrical engineering

During the lecture, I focus on:

1. Explain the concept in a simple and organized way.
2. Derivation of important laws and equations.
3. Solve various examples and problems step by step.
4. Training the student on exam questions.
5. Explaining common mistakes and how to avoid them.
6. Use MATLAB/Simulink, ETAP and simulation when needed.
7. A comprehensive review before tests and exams.

Teaching method:

- Individual lectures or small online groups.
- Live and interactive explanation via Zoom or Google Meet.
- Sharing the screen and writing on the electronic whiteboard.
- The possibility of recording the lecture as agreed.
- Providing summaries and practice problems for review.

The goal: for the student to be able to understand the material, solve problems on their own, and prepare confidently for exams and engineering projects.