Translated by GoogleSee original

Support courses in engineering sciences (Automation, Electronics, RDM, renewable energy, electrical engineering

From 43.32 C$ /h

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Location

Use Ctrl + wheel to zoom!

At student's location :

Around Paris, France

Around Brussels, Belgium

Around Montreal, 10, Canada

Online from Belgium

About Me

Doctor of Engineering Sciences and Electrical Engineering
Professor of Engineering Sciences and Electrical Engineering

• Electronics: Knowledge of analog, digital, and power electronics, as well as biomedical systems and instrumentation.
• Signal processing: Analysis, filtering and processing of signals.
• Power electronics: Control of inverters and rectifiers.
• Automation: Continuous and discrete systems, modeling, identification and control of automated systems.
• Mechatronics: Integration of mechanical, electronic and computer systems.
• Renewable energies: Study of solar pumping installations and wind power systems.
• Electrotechnics: Study of electric motors and transformers.
• Networks and telecommunications: Design and management of communication networks.
• Industrial computing: Knowledge of microprocessors (ARM, Intel) and programmable logic controllers (PLCs).
• Noise and vibration of asynchronous motors: Analysis of the vibrational and acoustic behavior of motors.
• Speed controller: Control of motor speed via speed controllers.

• Software used: MATLAB, Proteus.

Education

Doctor of Engineering Sciences and Electrical Engineering
professor of industrial engineering sciences and electrical engineering
Master of Science and Technology in Electrical Engineering
Degree in Electronics and Industrial Computing
Professional license: education teaching professions science and technology sector

Experience / Qualifications

15 years of experience as a professor of engineering sciences, certified in teaching professions in the science and technology sector. Trainer of engineers and freelancer for projects in the electrical field.

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

French

English

Skills

Electrical engineering

Electronic circuits

Electromagnetism

Reviews

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

At student's home

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Automation Signal Processing MATLAB Electronics VHDL Programming

43.32 C$ /h

..................................... (satisfied or refunded)........ .......
Electrical engineering expert
PhD student in electrical engineering and renewable energies
engineer in electrical engineering and industrial computing
I offer home schooling courses to deal with the difficulties encountered by students during their schooling,
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.
===Automatic (Servo-control and automatism regulation (discrete, continuous)========
===Electrical engineering (electrical machines) and power electronics (inverter rectifier)=======
===Continuous and sampled signal processing=================
===VHDL programming, microcontroller and microprocessor (intel, ARM)============
===High frequency electronics (transistor, diode, AOP, noise)============
===Propagation of electromagnetic waves and antennas========
===Analog and digital electronics (filters, flip-flops, sysml,Grafcet,amplifier)=====
=== Realization of electrical projects
===MATLAB ARDUINO Proteus ISIS
=== Renewable energies

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This pedagogical approach is effective since it has often led me to interesting results with my students.

Support courses in engineering sciences, electronics, automation, programming

44.99 C$ /h

Associate professor in engineering sciences, 5 years of professional experience at all levels, college, high school, university, preparatory classes, engineering schools. Gives courses from college to university, preparation for exams, revisions, oral preparation, development of study methodologies.

Webcam lessons

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Manoosh

4.85

(13)

I have a bachelor's degree in Electrical Engineering- Telecommunications from SBU university in Iran. SBU is one of the top 5 universities in Iran. I was always among the top three students during my undergrad. I am specifically good at Math, Programming, and Electrical Circuits analysis. During my undergrad, I was a TA for AVR micro-controllers programming and probability & statistics courses, during which I gained lots of teaching experience. During my bachelor's thesis, I implemented Behavioral Cloning (end-to-end) approach for self-driving by programming Artificial Neural networks in python with Keras and Tensorflow frameworks. I am currently a master student in the ECE department of McGill University working in the field of Computer Vision at Visual Motor Research Lab and am a member of Center for Intelligent Machines (CIM) at McGIll.

I believe that learning is only effective when you have a question in mind. Thus, I always try to first stimulate student's curiosity on the subject and talk about its application, before teaching that subject to them. Also, I teach the subjects very slowly and step by step to allow students to think deeply about everything I teach to them. Also, my courses' syllabus is flexible and I usually consult them with students on the first session.

Sam

4.85

(13)

Professor in mathematics, computer science at HEFF in Brussels and before a professor of electronics at the IEPSCF, ENGINEER in electronics ECAMIEN graduated in mathematics-physics and I propose an individualized pedagogy, an aid in the preparation of the interrogations or exams. My goal is to advance the student without overloading him. I give homework after each lesson and periodically provide progress reports.
I strongly encourage the student because the state of mind and morale have a direct influence on school results.
I am someone understandable and I always try to take each in his own way.
I always start by clarifying the course after giving an example then giving an example to the student plus doing a full exercise and finally correcting an exam together generally this is methodology but it can change from one case to another revise the courses studied in class.
give remarks that makes the job easier. give the tips and tricks you need to get a good rating.
try to make the student quick in these calculations and demonstrations
and give the way in which he should manage his duty

Marko

4.85

(13)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Loris

4.85

(13)

My lessons are specifically designed for students who need extra support in technical subjects such as math, physics, programming and related subjects. Whether you are struggling with basic concepts, need extra help preparing for tests or want to understand complex topics, I am here to help you on your way. Tutoring is preferably done online, I have an ipad so lessons run smoothly.

Mohssine

4.85

(13)

Doctoral researcher, associate professor and state engineer with extensive experience in academic support. I offer private lessons (in Electrostatics - Magnetostatics - Electromagnetism - Maxwell's Equations, - Waves - Induction) adapted to the profile of each student whatever their difficulties.

Working method:
I have an effective method applied as follows:
- Course review and writing of a summary sheet including all the important elements, formulas, tips which will allow the student to revise quickly.
- Typical and application exercises, in-depth exercises, summary exercises.
- Best preparation method for tests, assessments, exams and competitions.
---------------------------------------------------------- ---------------------------------------------------------- --------------
Distance learning courses:
-----------------------------------
I can perfectly teach remotely since I am equipped with a tablet on which I can work in the same way as if it were a notebook. The student can see everything I do live thanks to screen sharing, and the only thing necessary on their part is to use a computer. At the end of the class, I send them a copy of all the work completed, which allows me to ensure that they have kept a properly written record of the class spent together.
-----------------------------------------------------------------------------------------------------------------

Baqar

4.85

(13)

I am graduated in Electrical Engineering, and I am doing my masters at UPEC, Creteil in computer vision and Artificial intelligence. I have 4 years of teaching experience from collage to preparatory classes. I am living in Fontainebleau, and I can provide you the online or home tutoring.

Youness

4.85

(13)

I am an associate professor of electrical engineering I offer courses in everything related to the discipline of electrical engineering:
CPGE / BTS / DUT / IUT / DTS / UNIVERSITY / Technical high school
ARCHITECTURE OF A PROGRAMMED SYSTEM
INTERNAL AND EXTERNAL APPEARANCE
INPUT/OUTPUT MANAGEMENT
timeouts
timers, watchdog
PIC 16F8X 16F8XX PROGRAMMING
INTERRUPTIONS MANAGEMENT
ASSEMBLER PROGRAMMING
PROGRAMMING IN C
MACHINE CONTROL
SOFTWARE SIMULATION
MPLAB
MIKROC
ISIS/PROTEUS

Ossama

4.85

(13)

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School in the following disciplines:

1. Electrical engineering
With extensive expertise in electrical systems, I am able to teach all aspects of electrical engineering, including electrical machines, energy conversion, and electrical networks. My teaching approach emphasizes theoretical understanding and practical applications.

2. Electronics
I am adept at teaching analog and digital electronics, covering components, integrated circuits, and embedded systems. I can impart solid knowledge to train students in current and emerging technologies.

3. Automatic
I offer comprehensive courses in dynamic systems control, whether using conventional (PID) or advanced (nonlinear, real-time) controls. My courses incorporate practical applications tailored to industrial needs.

4. Industrial Computing and Automation
With experience in programming and industrial automation, I can teach topics such as programmable logic controllers, embedded systems, industrial communication protocols, and HMIs. My goal is to equip students to design and optimize complex automated systems.

Dounya

4.85

(13)

As an electronics engineer specializing in radio frequencies (RF), microwaves, and printed circuit board (PCB) design, I offer personalized courses to help you master advanced electronic technologies. My expertise covers a wide range of skills, including:

- Design of RF and analog circuits.
- Design of multilayer PCBs integrating complex functionalities (microstrip, stripline, etc.).
- Simulation and optimization with tools like Altium Designer, KiCad, LTspice, CST Studio, and ADS (Advanced Design System).
- Electromagnetic compatibility (EMC) and compliance testing.
- Design of IoT (Internet of Things) systems and integration of wireless modules (Wi-Fi, Bluetooth, LoRa, ZigBee).
- Signal analysis and digital processing (FFT, digital filtering).

With a strong background in R&D, I combine theory and practical applications to teach complex concepts such as:

- RF amplifiers and active/passive filters.
- Switching power supplies (SMPS) and linear regulators.
- Microcontrollers and embedded systems (STM32, Arduino, ESP32).
- Electronic manufacturing: creation of Gerber files, production monitoring, assembly and testing.

I have already successfully supported more than 50 students, helping them master key concepts such as computer-aided design (EDA), circuit debugging, and functional prototypes.

Recognized for my teaching skills, my patience, and my ability to make electronics intuitive, I adapt to the needs of each student, whether it is to succeed in an academic project, launch a prototype, or perfect professional skills.

Methodology

My courses are suitable for all levels, with a progressive and personalized approach:

1) Theoretical bases: exploration of fundamental principles (Kirchhoff’s laws, Thévenin and Norton’s theorems, circuit analysis).
2) Concrete applications: simulation of electronic circuits, design of multilayer PCBs, optimization for RF performances, and manufacturing of prototypes.
3) Practical projects: realization of complete systems, from idea to design, integrating microcontrollers, RF modules, and laboratory tests.

I rely on professional tools and offer additional resources:

1) Interactive simulations (CST Studio, LTspice).
2) Guides on electronic manufacturing (creating Gerber files, assembly).
3) Technical support for advanced tools: ADS, HFSS, MATLAB, Python.

Contact

Feel free to contact me to learn more or book a session. Together, we will explore advanced electronic technologies, and I will help you achieve your academic, professional, or personal goals.

Anas

4.85

(13)

This course is aimed at students wishing to strengthen their skills in mathematics, computer science and engineering sciences, three complementary disciplines for developing logic, rigor and analytical skills.

The objective is to support each student according to their level and needs:

🔹 In mathematics: understand concepts, solve various exercises and prepare effectively for exams.

🔹 In IT: learn programming (Python, Scratch, C++...), algorithmic logic and the use of digital tools.

🔹 In engineering sciences: discover the principles of modeling, mechanics, and electronics.

Each session is structured to make the student independent, confident and motivated, thanks to clear teaching methods adapted to their pace.

Good-fit Instructor Guarantee

Contact Youssef