from17.00CAD/ h
Learn how to ace all Electrical Engineering courses.
I have a bachelor's degree in Electrical Engineering- Telecommunications from SBU university in Iran. SBU is one of the top 5 universities in Iran. I was always among the top three students during my undergrad. I am specifically good at Math, Programming, and Electrical Circuits analysis. During my undergrad, I was a TA for AVR micro-controllers programming and probability & statistics courses, during which I gained lots of teaching experience. During my bachelor's thesis, I implemented Behavioral Cloning (end-to-end) approach for self-driving by programming Artificial Neural networks in python with Keras and Tensorflow frameworks. I am currently a master student in the ECE department of McGill University working in the field of Computer Vision at Visual Motor Research Lab and am a member of Center for Intelligent Machines (CIM) at McGIll.
I believe that learning is only effective when you have a question in mind. Thus, I always try to first stimulate student's curiosity on the subject and talk about its application, before teaching that subject to them. Also, I teach the subjects very slowly and step by step to allow students to think deeply about everything I teach to them. Also, my courses' syllabus is flexible and I usually consult them with students on the first session.
I believe that learning is only effective when you have a question in mind. Thus, I always try to first stimulate student's curiosity on the subject and talk about its application, before teaching that subject to them. Also, I teach the subjects very slowly and step by step to allow students to think deeply about everything I teach to them. Also, my courses' syllabus is flexible and I usually consult them with students on the first session.
Location
At teacher's location: Max&Co. Coiffure - Place Montreal Trust, McGill College Avenue, Montreal, QC, Canada






|
Use ctrl + wheel to zoom!
General info
Age: | Adults (18-64 years old) Seniors (65+ years old) |
---|---|
Student level: | Beginner Intermediate Advanced |
Duration: | 60 minutes |
The class is taught in: | English |
About Me
I believe that learning is only effective when you have a question in mind. Thus, I always try to first stimulate student's curiosity on the subject and talk about its application, before teaching that subject to them. Also, I teach the subjects very slowly and step by step to allow students to think deeply on everything I teach to them. Also, my courses' syllabus are flexible and I usually consult them with students on the first session.Education
❖ MEng in Electrical & Computer Engineering Starts in 2nd Sep 2019McGill University, Montreal, Canada
Member of Visual Motor Research Lab
❖ B.Sc. in Electrical Engineering (Telecommunications) 2015 - 2019
Shahid Beheshti University, Tehran, Iran
CGPA: 3.70/4.00 or 17.61/20
Thesis: Implementation and Improvement of Behavioral Cloning Approach for Line Following
Task in Autonomous Vehicles using Deep Neural Networks. In Behavioral Cloning (end-to-end)
approach, the system is trained to map raw input images to steering angles. It is trained to predict
the steering angles provided by a human driver during training.
❖ Mathematics and Physics Diploma 2012 - 2015
Bahar Elm Amoozan High school, Tehran, Iran
GPA: 19.92/20
Experience / Qualifications
Job Experience:❖ Internship at Parsnet Company (Sigfox network operator in Iran) summer 2018
Project: Built a portable device that prevents school children from being lost or kidnapped, by warning theirparents through email, if their child was deviated from a defined path (region) from home to schoolor vise versa using Sigfox low power IoT solution (MKRFOX1200 board).
Professional Skills:
❖ Technical skills: EEG Signal Processing using EEGLAB toolbox, Robotics, Image Processing using OpenCV library, Electronics, Soldering SMD and Dip components, Computer power supply repair
❖ Programming: C/C++, AVR Micro-Controller, Arduino Board, MATLAB & Simulink, Assembly, Python 3, Linux, AT commands, Familiar with Raspberry pie
❖ Software: Orcad Pspice, AVR Studio, AVR Code vision, CST, ADS, Proteus, LTspice, Keil uVision5, Visual Studio, Solidworks, Xilinx ISE, ARGoS Simulator, Microsoft Office
❖ Telecommunication: VoIP Testing tool (iTest)
Ask a question
Send a message explaining your needs and Manoosh will reply soon:
The more detail, the better.
Ex. "Hi, when are you available to meet for a lesson?"
Ex. "Hi, when are you available to meet for a lesson?"
Availability of a typical week
(GMT -04:00) New York
Mon | Tue | Wed | Thu | Fri | Sat | Sun | |
---|---|---|---|---|---|---|---|
0 | |||||||
1 | |||||||
2 | |||||||
3 | |||||||
4 | |||||||
5 | |||||||
6 | |||||||
7 | |||||||
8 | |||||||
9 | Monday at 9:00 | Tuesday at 9:00 | Wednesday at 9:00 | Thursday at 9:00 | Friday at 9:00 | Saturday at 9:00 | |
10 | Monday at 10:00 | Tuesday at 10:00 | Wednesday at 10:00 | Thursday at 10:00 | Friday at 10:00 | Saturday at 10:00 | |
11 | Monday at 11:00 | Tuesday at 11:00 | Wednesday at 11:00 | Thursday at 11:00 | Friday at 11:00 | Saturday at 11:00 | |
12 | Monday at 12:00 | Tuesday at 12:00 | Wednesday at 12:00 | Thursday at 12:00 | Friday at 12:00 | Saturday at 12:00 | |
13 | Monday at 13:00 | Tuesday at 13:00 | Wednesday at 13:00 | Thursday at 13:00 | Saturday at 13:00 | ||
14 | Tuesday at 14:00 | Thursday at 14:00 | Saturday at 14:00 | ||||
15 | Tuesday at 15:00 | Thursday at 15:00 | Saturday at 15:00 | ||||
16 | Tuesday at 16:00 | Thursday at 16:00 | Saturday at 16:00 | ||||
17 | Tuesday at 17:00 | Thursday at 17:00 | Saturday at 17:00 | ||||
18 | Tuesday at 18:00 | Thursday at 18:00 | Saturday at 18:00 | ||||
19 | Tuesday at 19:00 | Thursday at 19:00 | Saturday at 19:00 | ||||
20 | Tuesday at 20:00 | Thursday at 20:00 | Saturday at 20:00 | ||||
21 | Tuesday at 21:00 | Thursday at 21:00 | Saturday at 21:00 | ||||
22 | |||||||
23 |
from C$17At teacher's location
100% Satisfaction Guarantee
Good-fit Instructor Guarantee
If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.
Online reputation
- Instructor since September 2019
- Phone number verified
Availability of a typical week
(GMT -04:00) New York
Mon | Tue | Wed | Thu | Fri | Sat | Sun | |
---|---|---|---|---|---|---|---|
0 | |||||||
1 | |||||||
2 | |||||||
3 | |||||||
4 | |||||||
5 | |||||||
6 | |||||||
7 | |||||||
8 | |||||||
9 | Monday at 9:00 | Tuesday at 9:00 | Wednesday at 9:00 | Thursday at 9:00 | Friday at 9:00 | Saturday at 9:00 | |
10 | Monday at 10:00 | Tuesday at 10:00 | Wednesday at 10:00 | Thursday at 10:00 | Friday at 10:00 | Saturday at 10:00 | |
11 | Monday at 11:00 | Tuesday at 11:00 | Wednesday at 11:00 | Thursday at 11:00 | Friday at 11:00 | Saturday at 11:00 | |
12 | Monday at 12:00 | Tuesday at 12:00 | Wednesday at 12:00 | Thursday at 12:00 | Friday at 12:00 | Saturday at 12:00 | |
13 | Monday at 13:00 | Tuesday at 13:00 | Wednesday at 13:00 | Thursday at 13:00 | Saturday at 13:00 | ||
14 | Tuesday at 14:00 | Thursday at 14:00 | Saturday at 14:00 | ||||
15 | Tuesday at 15:00 | Thursday at 15:00 | Saturday at 15:00 | ||||
16 | Tuesday at 16:00 | Thursday at 16:00 | Saturday at 16:00 | ||||
17 | Tuesday at 17:00 | Thursday at 17:00 | Saturday at 17:00 | ||||
18 | Tuesday at 18:00 | Thursday at 18:00 | Saturday at 18:00 | ||||
19 | Tuesday at 19:00 | Thursday at 19:00 | Saturday at 19:00 | ||||
20 | Tuesday at 20:00 | Thursday at 20:00 | Saturday at 20:00 | ||||
21 | Tuesday at 21:00 | Thursday at 21:00 | Saturday at 21:00 | ||||
22 | |||||||
23 |
from C$17At teacher's location
Good-fit Instructor Guarantee
If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.
Share
You are here
Similar classes
Youssef
Automation Signal Processing MATLAB Electronics VHDL Programming..................................... (satisfied or refunded)........ .......
Electrical engineering expert
PhD student in electrical engineering and renewable energies
engineer in electrical engineering and industrial computing
I offer home schooling courses to deal with the difficulties encountered by students during their schooling,
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.
===Automatic (Servo-control and automatism regulation (discrete, continuous)========
===Electrical engineering (electrical machines) and power electronics (inverter rectifier)=======
===Continuous and sampled signal processing=================
===VHDL programming, microcontroller and microprocessor (intel, ARM)============
===High frequency electronics (transistor, diode, AOP, noise)============
===Propagation of electromagnetic waves and antennas========
===Analog and digital electronics (filters, flip-flops, sysml,Grafcet,amplifier)=====
=== Realization of electrical projects
===MATLAB ARDUINO Proteus ISIS
=== Renewable energies
COURSE OBJECTIVES AND PEDAGOGICAL APPROACH
Resumption and deepening of fundamental concepts through exercises with course reminders.
Put the student in a situation of questioning and research.
Respond to individual issues and questions
Exercise training in order to achieve real mastery of the content.
Learn to build theoretical reasoning from observable facts or hypotheses.
Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)
This pedagogical approach is effective since it has often led me to interesting results with my students.
Aniket
AI Web Apps and Tools Mastery Classes | Practical Learning by Building Apps using AI (Langchain, OpenAI, HuggingFace, etc)Hello,
I'm doing a PhD in AI and ML using Python and am an Oracle-certified trainer with 350+ reviews and ratings [with proof attached], I will be able to teach you Python better than any of my competition.
Why choose me?
1. 300 + reviews and ratings
2. Certified tutor
3. More than 5 years of teaching experience
4. Worked as a Software engineer in companies like Virtusa Corp and DIGIDEZ DIGITAL SYSTEMS
5. Hold B.tech and M.tech in Computer Science
Featured Review :
Been trying to learn Java on my own for about 1 year and I couldn't get a grasp on it. Aniket make learning Java a fun experience and challenges you to think for yourself to reinforce the concepts you've learned. I am truly excited for our meetings and he makes time go by so fast that I'm upset when they end. Great teacher and he is genuinely passionate about your success. If I could give him more stars I would!!!
Thanks
Aniket
Ludovic
Support or initiation course on programmingI've been developing since I was 15, and coding has always been at the heart of my career. Initially, Java was my language of choice. Now I use Python and Nodejs. I developed a complete product which was sold to companies in order to offer Single Sign-On (SSO) to an Oracle product supporting OpenID, SAML and Kerberos. I developed in Node.js.
Pr YSF
Electronics, Control of industrial systems, C/C++ VHDL programming, digital and analog electronics, MATLAB simulationHello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences
These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.
COURSE OBJECTIVES AND PEDAGOGICAL APPROACH
Resumption and deepening of fundamental concepts through exercises with course reminders.
Put the student in a situation of questioning and research.
Respond to individual issues and questions
Exercise training in order to achieve real mastery of the content.
Learn to build theoretical reasoning from observable facts or hypotheses.
Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)
This educational approach is effective since it has often led me to interesting results with my students.
Associate professor provides support courses in electrical engineering
Yassine
Python Artificial Intelligence Machine Learning, Deep LearningPython is an essa
Had
Had
Bdhdhdj dhdhd JD jdjd jdjd jdjd jdjd djdj djdj djdj djdj djdnd djdnd djdnd djd djdnd djdnd djdnd jfndn djdnd ndndnd hdhdhd dhdhd hdhdhd djdj jdjd jdjdjdj djdj djdjdjjdjdjdjdjdjdjdjdnbdbdbdbdbdbbxlslsjdjdndjdmdkdkdj
Esteban
Maths/ Physics/ IT/ Electronics lessonsDouble-degree student at ÉTS Montreal/INSA Rennes (France) in aerospace/computer-electronics, I studied for 4 years in France subjects such as maths, physics, as well as computer science and electronics. I am willing to give lessons at all levels, preferably by videoconference.
In France, I gave maths/physics lessons at all levels. I can also speak in English
Mohamed
General computer course (Python, C, javascript, etc ...)The aim of this course is to learn programming in general and to discover the different programming applications such as machine learning, deep learning or even video game programming via Unity.
There is also the possibility of doing lessons at a more advanced level according to the student's need and to concentrate on one point or another.
Sébastien
Web and mobile programming course (front-end / back-end)Hello,
I am a trainee engineer at MBA and I have 19 years of experience in the field. I teach web and mobile programming courses (Spring, Java, Hibernate, Angular, HTML5, CSS3, etc.)
I am available on Saturdays.
thank you,
Mehdi
JAVA / PHP / HTML / CSS / SQL Programming CourseHello,
Graduated in 2016 as a computer engineer and application developer for a computer company, I have acquired strong programming skills over the last 5 years. Today, I give tutoring all levels on the following technologies: JAVA / PHP / HTML / CSS / SQL
If you need help to:
- Realize a TP / Project
- Review specific points on a chapter
- Prepare a control
- Or simply learn programming
So I can help you!
My method is simple: each of my classes is followed by exercises to put into practice what you have just learned. I use a lot of schemas because they are easier to understand than a long explanatory text.
For anyone outside Montreal, know that I also give lessons via skype through screen sharing, and that the course is as instructor as a face to face.
You are interested ? send me a message on Apprentices!
Matías
Private coding / programming lessons with pythonPython is one of the best, if not the best, language to start learning programming. It is also one of the most widely used languages today, especially in cutting-edge areas such as machine learning.
This popularity means that Python is constantly evolving. It offers a wide range of tools and libraries, which are free and very varied.
As an aeronautical engineer, I like to share my knowledge and derive satisfaction from it by teaching and motivating others.
I'm used to working with people of different ages. I believe in the importance of segmenting learning, visualizing progress, setting concrete goals and practicing regularly.
Beyond these general principles, there is no magic rule or method. Some approaches work with some students but not with others. Adaptation to individual needs is therefore the main objective of private lessons. So I will do my best to find what motivates and helps my student.
Salah Eddine
Master Python with Courses Suitable for All Ages and Levels! Beginners, Intermediates, Professionals, Everyone is WelcomeMaster Python with Personalized Courses
Discover the art of programming with Python courses tailor-made to meet your specific needs. Whether you are a beginner, intermediate or professional, my lessons are suitable for all levels.
Why Choose My Courses?
Personalized Teaching Approach: Each course is tailored to your skill level and individual goals.
Practical Experience: Learn by doing with real-world projects that build your understanding and skills.
Ongoing Support: Get unlimited email support for any questions you have between sessions.
As a Python expert, I have a passion for teaching and sharing my knowledge. My goal is to guide you effectively in your learning journey.
Book Your First Lesson:
Start your journey to Python mastery now by booking your first lesson. Whether you aspire to enter the development field or hone your existing skills, these courses are designed for you.
Robert
Excel lessons, at your place, at my place or remotely, at your best convenience!As a Franco-Belgian management teacher, I give Excel lessons with passion!
Whether remotely or face-to-face, I offer many examples and exercises to accompany you.
I travel without problem throughout the region of Brussels and its surroundings, for lessons of at least 2 hours. For France, courses are only given remotely.
Here are some key words that will be covered in my classes:
Scenario analysis, Year, Rounding, Today, Bdnb, Bdnbval, Bdsum, Search, Column, Copy/paste in values, Copy/paste with transposition, Consolidation, Date, Datedif, Determat, Dollar, Right, Righterg, Equiv, Esterror, Estna, Frequency, Filter (simple and advanced), Format of cells, Left, Large.Value, Printing of documents, Index, Indirect, Inversemat, Day, Weekday, Line, Matrix, Max, Maxa, Max.Si, Min , Mina, Mina.If, Formatting of cells and ranges, Month, Average, Average.If, Nb, Nb.If, Nbval, Naming of cells and ranges, No, Small.value, Product, Productmat, Protection of cells, Lookup (Lookup), Lookupv (VLookup), Lookuph (HLookup), If (If), If.Not.Disp, If.Conditions, Iferror, Sum, Sumproduct, Sum.If, Sum.If.Set, Substitute , Pivot tables, Sorting, Cell locking
Do not hesitate to contact me to organize your lessons according to your needs and availability. Together, we will develop your Excel skills in an efficient and personalized way.
Bappa Tchandi
Tailor-made courses in networking, security and office automationI am a Computer Engineer specializing in Computer Networks and Security, I have a degree in technology with an RSI option, and I have been a private tutor since 2023. Trust me, choose me and we will achieve the objective set for you in IT.
My methodology: an approach tailored to each student. Each student has a different level and goals. That's why my classes are fully personalized to meet each student's specific needs.
🔹 Assessment of level and needs: During our first exchange, we take stock to understand your expectations (initiation, improvement, specific project, preparation for an exam, etc.).
🔹 Interactive and progressive courses: My courses are built around active teaching, with a balance between theory and practice. I explain concepts in a simple and illustrated way before moving on to concrete exercises.
🔹 Practical scenarios and projects: To better assimilate the concepts, I offer practical cases and real-life scenarios, particularly in networking and cybersecurity (attack simulation, server configuration, firewall management, etc.).
🔹 Personalized monitoring and support: After each session, I provide a summary of the points covered and exercises to be carried out to strengthen the
Mohammed Shan
Learn Coding at Your Own Pace - Expert Programming Tutor!Are you ready to take your programming skills to the next level? My interactive and engaging lessons are tailored to your individual learning style and goals. Each session starts with a quick overview of the topic, followed by hands-on coding exercises to reinforce your understanding.
We’ll dive into real-world projects, making the learning process practical and relatable. Whether it's building web applications, solving algorithmic challenges, or exploring cybersecurity principles, my structured lessons ensure you gain both theoretical knowledge and hands-on experience.
With a Master’s degree in Computer Science and professional experience at VISA and Broadcom, I provide industry insights that connect learning to real-world applications. My clear explanations, step-by-step guidance, and problem-solving approach help students master coding with confidence.
No matter your skill level—absolute beginner to advanced developer—I ensure each session is productive, fun, and empowering. Flexible scheduling, personalized feedback, and customized lesson plans make learning seamless and effective.
You’ll also receive practice problems, project-based assignments, and ongoing support to reinforce what you learn. Whether you're preparing for coding interviews, academic courses, or career advancement, I’m here to guide you every step of the way.
My goal is to make learning programming an enjoyable and rewarding experience. I simplify complex concepts and provide real-world coding examples that help you grasp topics easily. Don’t let coding challenges hold you back—take control of your learning today!
🚀 Start your coding journey now! Book a session and begin mastering programming with expert guidance. Limited slots available—reserve yours today!
Mohamed
Data Engineering: Extract Transform Load (ETL) Programming with Apache Airflow - Industry ApplicationsThis course provides a hands-on approach to mastering Apache Airflow, a powerful open-source workflow automation tool widely used in ETL (Extract, Transform, Load) processes. You will learn how to build, schedule, monitor, and optimize data pipelines, ensuring data reliability and efficiency in production environments. Through real-world examples and projects, you will gain the skills required to become a proficient Data Engineer capable of handling complex workflows in modern data ecosystems.
This course will allow you to build multiple real-world ETL workflows using Apache Airflow. Let me know if you would like additional information! 🚀