Translated by GoogleSee original

Detailed Online Electrical Safety Course via Webcam

From 22 C$ /h

Since electricity is a permanent danger, whether for humans (it can cause death) or for buildings (it can cause fires or explosions), it can only be used under well-defined safety conditions. In order to avoid any risk of contact with conductors (and therefore, to avoid electrification or electrocution), to protect electrical circuits, to protect devices from short circuits or overloads, the integration of electrical safety is necessary.
Plan:
1. Electrical risks
2. Nature of electrical accidents and danger of electric current
3. Protective measures
4. Safety measure against indirect effects of electric current

Extra information

Basic knowledge of electricity

Location

Online from Tunisia

About Me

Passionate about this profession, and with over 15 years of teaching experience, I am confident that I can add value and ensure teaching excellence.

I have been employed as a university teacher of several subjects in my specialty.
I quote:
-General electricity
-Logical systems
-API
-GRAFCET
-Electronic
-Diagrams and standards for domestic installations
-Dimensioning of industrial installations

My teaching style includes:

Make learning more enjoyable, engaging, and hopeful with lesson plans that meet the needs of each learner.
Strong leadership and presentation skills to help my learners realize and reach their potential
I have always strived to help learners achieve their learning goals, including adapting teaching materials and creating extracurricular activities.
Foster learner creativity and self-confidence.

Education

Master's degree in electrical engineering
Certificate of Advanced Studies in Electrical Engineering
Master's in Conversion and Treatment of Electrical Energy
Currently a doctoral researcher

Experience / Qualifications

Secondary school teacher
University teacher for more than 10 years
Educational advisor at the higher institute

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

120 minutes

The class is taught in

French

Arabic

English

Skills

Electrical engineering

Reviews

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Private online course on the study of direct and alternating electrical circuits

22 C$ /h

Study of continuous electric circuits, passive dipoles, active dipoles, Kirchoff's law, mesh law, Norton's theorem, and Thévenin's theorem.
Single-phase AC network. Calculations and representation
Three-phase AC network. Calculations and representation

Private lessons on industrial automation, GRAFCET and industrial programmable logic controllers online

22 C$ /h

Development of a GRAFCET according to standards and programming of a Siemens programmable controller.
Structure of automated production systems (SAP)
Hardware architecture of APIs, API programming languages, The LADER language (LD),
Input/Output Addressing, Example

Ansh

4.86

(7)

Applied Power Electronics & Motion Digital Signal Processing
Electrical & Electronic Power Systems Telecommunications
Microwave Electronics Control Engineering, with all electrical subjects on need basis.
apart from that live and practical’s are also available at coding level like VHDL,System verilog digital electronics.

Matías

4.86

(7)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

4.86

(7)

Hello, I am a doctor in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (electronics, automation, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Adam

4.86

(7)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Ali

4.86

(7)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

Ahmed

4.86

(7)

Fundamentals of electronics engineering, Arduino programming, and smart home circuits

I offer practical and simplified training that starts from the basics of electronics and goes up to the design and programming of smart home and Internet of Things systems, with theoretical explanations and practical applications on real circuits and digital simulations.

Course content:
1. Fundamentals of Electronics

Identifying different electronic components: resistors, capacitors, diodes, transistors, and sensors.

Understanding correct electrical connections

Reading electronic circuits and working with breadboards

2. What is Arduino? And how do we program it?

Introduction to Arduino boards

Explanation of the C++ programming language used with Arduino

How to download code and test projects step by step

3. Design and programming of smart home circuits

Connecting sensors and smart switches

Lighting and electrical appliance control

Designing a system that controls the home using a mobile phone

Introduction to the Internet of Things (IoT) and its connection to home control

4. Controlling the home from a mobile phone

Creating simple control interfaces

Connect using Wi-Fi or Bluetooth

Remote device operation and sensor monitoring

5. Practical training

Real Arduino circuit experiment

Using simulation software such as Tinkercad and Proteus

Practical projects ready for implementation

Who is this course for?

Beginners in the field of electronics

Students interested in Arduino programming

Who wants to create a smart home project?

Anyone who wants to understand how electronics work in a simple and practical way

Fatima

4.86

(7)

🚀 Do you finally want to understand electricity, electronics, or automation without stress? You've come to the right place!

👩‍🏫 I'm an electrical and renewable energy engineer and an experienced teacher. I'll guide you step by step, even if you're starting from scratch.

💡 My courses allow you to:
Understanding the basics of electricity

Master electronic circuits, control systems, and automatons

Learn at your own pace with concrete examples, diagrams, simulations and guided exercises

🧰 Content suitable for:
High school students / students in BTS, DUT, license, preparatory classes, engineering schools......

Students in retraining or self-taught

International students (courses available in French or English)

✅ What sets me apart:
Clear, progressive and caring approach

Support after the course if needed (questions, corrections, etc.)

Online or face-to-face courses

Venkateswarlureddy

4.86

(7)

I am an Analog IC Design Engineer with strong academic and practical experience in integrated circuit design. During my master’s, I published two conference papers in the field of analog and power management circuits. Currently, I am working as an Analog IC Design Engineer, focusing on developing circuits such as operational amplifiers, current mirrors, bandgap references, and LDOs. My teaching approach blends solid theoretical foundations with real-world design practices, making complex concepts intuitive and industry-relevant. Whether you are a beginner or an advanced learner, I can guide you from fundamentals to hands-on design methodologies.

Muhammad

4.86

(7)

As a teaching assistant in the College of Engineering (specializing in Mechatronics Systems Engineering), I provide specialized academic support to engineering students to help them understand complex material, pass exams with distinction, and complete academic projects professionally.
I offer explanations and assistance in the following courses:
• Fluid Mechanics & Hydraulic/Pneumatic Control.
• Rigid Body Dynamics.
• Sensors and Data Acquisition Systems.
• Digital control machines and computer-aided design/manufacturing (CAD/CAM & CNC).
• Electric Machines & Drives.
• Renewable Energies.
In addition to theoretical explanations and worksheet solutions, I offer practical guidance in using engineering software (such as MATLAB and ANSYS) and assistance with graduation projects and course projects (CAD modeling and CFD simulations). My goal is to simplify engineering concepts and connect them to practical applications.

Amir

4.86

(7)

Basics of electricity
electric current
electrical potential
The difference between power and electrical energy
Electrical resistance, its types, and methods of connection
How to calculate total resistance
How to calculate the total current in an electrical circuit and the current flowing through a branch
How to calculate the potential difference between two points

Abdelmalek

4.86

(7)

Master Industrial Control Systems (SCADA, DCS, IIoT) and automation through tailored, hands-on coaching based on real-world industrial projects! With over 10 years of international engineering, solution architecture, and technical business development experience working with major industry vendors

I offer practical courses designed for engineering students, university undergraduates, and professionals looking to upskill.

The pathway will be in 7 days to cover all basics in OT environnement :
Day 1 - Virtual Environment Preparation for OT projects
- Install Hypervisor on your workstation (A virtual machine).
- Create a Linux VM (Fedora Server).
- Configure 2 networks on the VM: one in NAT (internet access) and one in Host-Only Network (to isolate lab traffic).
- Install basic tools for OT
Day 2: Modbus PLC Simulation (Add 2 Server and test script client to connect)
- Implement Modbus PLC simulators and architecture overview
- Create PLC simulator scripts in src/plc-simulators/
- Add validation test script for Modbus connectivity
- Update Day 2 guide with detailed implementation steps and compatibility notes
Day 3: NGINX Load Balancer Configuration (Round Robin)
- Understand NGINX Stream Module
- Configure NGINX
- Verify and Load the Module
- Troubleshooting NGINX (Activate load balancing in layer 4 protocol, Set permission)
- Step-by-Step Load Balancer Validation
- Test Load Balancing (Round-Robin)
- Test Failover (Resilience)
Day 4 - Creation of the traffic generator (SCADA Client)
- TBD
Day 5 - Traffic capture and measurement with TShark
TBD
Day 6 - Advanced analysis and overload simulation
TBD
Day 7 - Grafana
-TBD
What we can cover together based on your goals:

Henoc

4.86

(7)

Prof d'Électricité - Cours en Direct depuis une Vraie Salle de Classe

MARRE DES COURS DEVANT UNE FEUILLE BLANCHE ?

Je donne mes cours EN DIRECT depuis une salle de classe avec tableau et craies.
Comme à l'école, mais en Google Meet chez vous.

POUR QUI ?
COLLÈGE / LYCÉE : Circuits, lois, sécurité, lecture de schémas
BAC PRO : Schéma de puissance, schéma de commande, câblage, installation
BTS : Schéma industriel, démarrage des moteurs, relais et contacteurs

MA MÉTHODE :
On travaille sur VOS exercices. Je vous explique au tableau pas à pas.
Explications claires et concrètes avec des exemples de chantier.
Vous voyez tout ce que j'écris et vous repartez avec des photos du cours.

COMMENT ÇA SE PASSE ?
Cours 100% en visio via Google Meet.
Qualité pro : Son + Image + Tableau visible.
Horaires : Le soir et week-end, heure de France.

Niveaux : Débutant à Avancé. 1er cours pour tester.

Dhanush

4.86

(7)

Electrical engineering is a current trend and upcoming future necessity for people day to day life. so I will teach about how our electrical engineering help our day to day life and it remain use full and safe to our environment and people . People of this world must know about safety measures of electrical system. Also I will teach how to protect our environment and nature by using electrical engineering concept. The above content what I mentioned is learned by future students and taught by me.

عبدالرحمن

4.86

(7)

Explanation of courses and materials in electrical engineering and devices for students of the Electrical and Electronics Engineering Department

A simple and clear explanation of engineering courses and topics, with a focus on understanding the basics and linking the theoretical aspect with practical application.

The explanation includes topics in electrical engineering, measurements and devices, control, and topics related to engineering disciplines, with step-by-step explanations of concepts, laws, circuits, and application methods.

🎓 Suitable for engineering students at all levels.

⚡ Electrical Engineering
🎛️ Instrumentation
🎚️ Control Engineering
📐 Explanation of circuits, diagrams, and geometric concepts
Linking studies to practical applications in the engineering field

The goal is not just to memorize the material, but to understand it in a way that helps the student to study, solve problems, and benefit from it in his professional life after graduation.

Mayank

4.86

(7)

In this 30-minute class, we will understand the two core components of a microprocessor: the ALU (Arithmetic Logic Unit) and the Control Unit. I will explain their structure, functions, and how they work together to execute instructions, using simple diagrams and practical examples. The goal is to build a clear understanding of how a microprocessor processes and controls data.