High School: ENGINEERING SCIENCE courses at home or online - Saint-Denis

Translated by GoogleSee original

High School: ENGINEERING SCIENCE courses at home or online

From 33 C$ /h

I am a 41-year-old mechanical design and structural calculation engineer.
I offer private lessons at college and high school level in Engineering Sciences as well as in the following subjects: Mathematics; Chemical Physics ; Mechanical ; Technology; Digital Sciences and I offer primary-college courses in French, English and Spanish.
I am willing to pick up the kids after school to continue with homework or lessons.

My assets, for the students and the teaching that I provide: → I show young people the concrete use of what they learn by real and speaking examples → I use my ability to capitalize on the know-how as well as my knowledge in knowledge management to transmit my knowledge to them → I have developed many tutorials within my professional career and am able to set up a program with paper, computer or digital media → I have acquired great rigor, particularly in hypotheses and definitions, through my thesis and my mastery of national, European and international standards which are very precise → I have good oral and handwritten communication in French, English and Spanish if you have foreign students.

Extra information

- Provide a filing cabinet and perforated sheets; or one or more notebook.
- Provide sheets of drafts and a quick marker.

Location

Online from Reunion

About Me

Engineer by training, with a post-BAC course in Preparatory Classes (CPGE). I cumulate two Masters level diplomas, a doctoral student and 9 years of professional engineering experience in the field of calculation and training. My goal is to become a professor with CAPES, while waiting for my diploma, I wish to teach in a private setting by private lessons in the subjects I master:
- Mathematics
- Chemical Physics
- Engineering Sciences
- Mechanical
- Technology
- Digital Sciences

In my professional career, I trained engineers and supervised trainees in calculation methods on material physics with advanced mathematics. During my sessions, I demonstrate clarity, efficiency and impact on people with an education recognized by my peers. Added to this is good group management, time and priorities. Finally, I regularly supervised and shared my knowledge on various and varied subjects with young people, which I greatly appreciate, within the framework of my extra-professional activities.

Education

BAC S option SI 2003
Mechanical Design Engineer (Double specialty: technological innovation and product development) at UTBM (Belfort BAC + 5) 2009 with semester in Spanish in Argentina
Research Master in Mechanical Design at UJF (Grenoble 2010)
CIFRE thesis in knowledge management at UJF / INPG / Lab G-SCOP (Grenoble 2013) (not obtained by bankruptcy of the company ANTECIM)

Experience / Qualifications

Home courses successfully for neighbors.
Baby-sitting of my godchild from 6 months to 2 years old and my 4 neighbors from 2 years to 12 years old for 4 years.
My assets, for the students and the teaching that I provide: → I show young people the concrete use of what they learn by real and speaking examples → I use my ability to capitalize on know-how as well as my knowledge in knowledge management to transmit my knowledge to them → I have developed many tutorials within my professional career and am able to set up a program with paper, computer or digital media (video / projector / etc.) → J have acquired great rigor in particular in hypotheses and definitions, through my thesis and my mastery of national, European and international standards which are very precise → I have good oral and handwritten communication in French, English and Spanish if you have students strangers.

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

90 minutes

120 minutes

The class is taught in

French

English

Spanish

Skills

Computer engineering

Mechanical engineering

Electrical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

College-High School: PHYSICS-CHEMISTRY course at home or by video

22 C$ /h

I am a 41-year-old mechanical design and structural calculation engineer.
I offer private lessons at college and high school level in Physics and Chemistry as well as in the following subjects: Mathematics; Engineering Sciences ; Mechanical ; Technology; Digital Sciences and I offer primary-college courses in French, English and Spanish.
I am willing to pick up the kids after school to continue with homework or lessons.

My assets, for the students and the teaching that I provide: → I show young people the concrete use of what they learn by real and speaking examples → I use my ability to capitalize on the know-how as well as my knowledge in knowledge management to transmit my knowledge to them → I have developed many tutorials within my professional career and am able to set up a program with paper, computer or digital media → I have acquired great rigor, particularly in hypotheses and definitions, through my thesis and my mastery of national, European and international standards which are very precise → I have good oral and handwritten communication in French, English and Spanish if you have foreign students.

Middle School-High School: MATHEMATICS lessons via video (webcam)

22 C$ /h

I am a 41-year-old mechanical design and structural calculation engineer.
I offer private lessons at college-high school level in Mathematics but also in the following subjects: Physics-Chemistry; Engineering Sciences ; Mechanical ; Technology; Digital Sciences and I offer primary-college courses in French, English and Spanish.
I am willing to pick up the kids after school to continue with homework or lessons.

My assets, for the students and the teaching that I provide: → I show young people the concrete use of what they learn by real and speaking examples → I use my ability to capitalize on the know-how as well as my knowledge in knowledge management to transmit my knowledge to them → I have developed many tutorials within my professional career and am able to set up a program with paper, computer or digital media → I have acquired great rigor, particularly in hypotheses and definitions, through my thesis and my mastery of national, European and international standards which are very precise → I have good oral and handwritten communication in French, English and Spanish if you have foreign students.

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Anh

4.85

(13)

In these tailored Engineering sessions, I combine tutoring with mentoring to guide your technical understanding and foster your growth in key engineering concepts. My approach adapts to your natural learning style, ensuring that each lesson is intuitive, engaging, and effective.

With over 10 years of experience in Aerospace, Mechanical, and Electrical engineering, I bring a wealth of both academic and real-world expertise to our sessions. I’ll share insights from the Aerospace, Maritime, and Aviation industries to help you develop practical skills and problem-solving techniques, tailored to your needs.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

Or need help with areas like control systems or data analysis, I’m here to guide you through any engineering challenge. My lessons are customized to fit your learning style and academic goals, ensuring you leave each session feeling confident and prepared.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Rafik

4.85

(13)

Are you new to computer science ? are you struggling in understanding the foundation of computer science and programming ? is computer science not your first choice and you wanna get a good grade at it ?

If you answer "yes" to one of the above question then this course is for you . I have three years experience teaching computer science foundation to junior university students and here to help you in understanding all what you need to pass the course .

Adam

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Reza

4.85

(13)

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB.

Some of the finite element modeling and numerical simulations I have worked on include:
- Multiscale finite element modeling for fatigue crack propagation in porous materials.
- Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper].
- Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles.
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials.
- Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions.

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Ali

4.85

(13)

I offer one-to-one Machine Learning and AI tuition for university students, postgraduates, working professionals, and serious self-learners. Lessons are available online or in person around Birmingham.
What I cover:

Python for data science and ML (NumPy, Pandas, Scikit-learn)
Deep learning with TensorFlow and Keras
Core ML concepts: regression, classification, clustering, neural networks, CNNs
Computer vision and image classification (my published research area)
University coursework support, dissertation help, project guidance
Help with Kaggle competitions and personal portfolio projects

How I teach:
I focus on understanding, not memorisation. We work through real datasets and real problems — not toy examples — so you can actually apply what you learn. I'll help you build a model from scratch, debug it when it doesn't work, and explain the maths behind why it does or doesn't perform well. For university students, I can also help with assignments, dissertations, and final-year projects.
Whether you're just starting out, stuck on a coursework project, or trying to break into ML professionally, I can meet you wherever you are and help you move forward.

Farid

4.85

(13)

I am a Master’s student in Telecommunications Engineering at the University of Bologna, with a current GPA of 29.54/30 and a previous academic background in Control Engineering.

I offer lessons in English for university and engineering students who need help with mathematics, physics, signals and systems, control systems, and telecommunications. My lessons are structured and practical: first we identify the student’s difficulties, then we review the theory clearly, and finally we solve exercises step by step.

I can help with exam preparation, assignments, lecture review, MATLAB practice, and understanding difficult technical concepts. The goal is not only to solve one exercise, but to help the student build a clear method for solving similar problems independently.

Juan

4.85

(13)

I work with you as a Spanish-speaking international student to help you clearly and directly understand subjects such as engineering mathematics, physics, electronics across all areas (analogue, digital, power systems and circuits), signals and systems, and applied programming using tools like Python, MATLAB, or Arduino. The goal is for you to stop seeing these topics as abstract concepts in English and start truly understanding them in your own language, connecting theory with what is required at university. Each session is adapted to what you are covering in class, whether it is exam preparation, assignment support, or strengthening fundamentals, with simple, practical explanations focused on helping you progress with confidence.

Sandra

4.85

(13)

Hello! My name is Sandra. I completed my undergraduate degree in Electronics and Communications Engineering in Mexico City. Following that, I earned my Master's degree in Communications Systems and Signal Processing in England, and my PhD in Physics, focusing on the acoustics of musical instruments, in Scotland.

I have been teaching electronics and electrical engineering since 1999 at various universities and in different countries, and I can do this equally well in German, English or Spanish.

If you are currently having difficulty following the electronics or electrical engineering lectures at your school, college or university, or if you want to prepare for an exam, or if you are looking for further opportunities to practice your knowledge, or if you generally want to learn about electronics or electrical engineering, I would be happy to help you!

Topics that I often cover include:

* Voltage, current, power, efficiency
* Ohm's and Kirchhoff's laws
* Solution of resistance networks with resistors in parallel and in series
* Solving circuits using the mesh and knot method
* Solving circuits using the superposition theorem
* Backup voltage and current sources
* Electric and magnetic fields
* Circuits with capacitors and inductors in direct current (step response)
* Circuits with capacitors and inductors in alternating current
* Power in alternating current, power correction
* Three-phase current
* Analog-to-digital and digital-to-analog conversion of signals
* Signal sampling, Nyquist theorem, aliasing, quantization
* Fourier Theorem and Transformation
* DFT, frequency resolution, spectral leakage, window functions
* Spectrogram, frequency and time resolution
* Fourier-based analysis and synthesis of signals
* Passive and active filters
* LTI systems, folding
* Laplace, impedance, transfer function, frequency response, Bode plot
* Diode circuits
* Transistor (BJT) basic circuits
* Basic op-amp circuits
* Audio signal chain
* Microphones, preamplifiers, power amplifiers, loudspeakers

Zewdu

4.85

(13)

Hello! My name is Zewdu, and I am a Master's student in Global Production Engineering and Management at Warsaw University of Technology. I hold a Bachelor's degree in Mechatronics Engineering and have experience in engineering projects, research, and STEM education.
I offer personalized tutoring in Mathematics, Physics, Calculus, Mechanics, and Engineering-related subjects for secondary school, high school, and university students. My goal is to help students understand concepts clearly, improve problem-solving skills, and build confidence in their studies.
Lessons are adapted to each student's level and learning pace. Whether you need help with homework, exam preparation, assignments, SAT preparation or understanding challenging topics, I will provide clear explanations and practical examples to support your learning.
I welcome students of all levels I mentioned and look forward to helping you achieve your academic goals.

I offer lessons online to students worldwide and in person in Warsaw, Poland.

Lucas

4.85

(13)

I am a PhD researcher at the University of Oxford, with an MRes from the University of Cambridge and research experience with Rolls-Royce.

I enjoy helping students build confidence in engineering, physics, and mathematics through clear explanations and a supportive, personalised approach. Whether you are preparing for exams, working through challenging coursework, or simply looking to strengthen your understanding, lessons are tailored to your goals and learning style.

My aim is not only to help you achieve better results, but also to develop the problem-solving skills and intuition that make technical subjects more enjoyable and rewarding.

Amir

4.85

(13)

Basics of electricity
electric current
electrical potential
The difference between power and electrical energy
Electrical resistance, its types, and methods of connection
How to calculate total resistance
How to calculate the total current in an electrical circuit and the current flowing through a branch
How to calculate the potential difference between two points

Massimiliano

4.85

(13)

Struggling with your classes or upcoming exams?
I've been there too, and I can help with personalized one-to-one tutoring tailored to your needs. From one student to another, we'll focus on what you actually need to understand, improve, and succeed.

Abdelmalek

4.85

(13)

Master Industrial Control Systems (SCADA, DCS, IIoT) and automation through tailored, hands-on coaching based on real-world industrial projects! With over 10 years of international engineering, solution architecture, and technical business development experience working with major industry vendors

I offer practical courses designed for engineering students, university undergraduates, and professionals looking to upskill.

What we can cover together based on your goals:
- SCADA & DCS Systems: System architecture design, database configuration, HMI engineering, and control center supervision platforms.
- Industrial Networks & Protocols: Understanding and integrating key industrial communication protocols (IEC 61850, Modbus, Profibus) and protocol gateway solutions.
- Automation & Integration: PLC/DCS programming fundamentals, hardware/software integration, single-line diagrams (SLD), and testing methodologies (FAT/SAT).
- Industrial IT & OT Convergence: Bridging plant-floor operational technology (OT) with enterprise IT infrastructure, telemetry, and system governance.
- IT/OT Business Solutions & Proposals: Designing turnkey technical architecture proposals, cost estimation/pricing models, bid & tender management, and project risk evaluation.
- Custom Problem Solving & Coding: Adapting simple tailored solutions to solve real technical problems in the programming language of your choice (Python, C/C++, PLC scripting, etc.).
Teaching Approach:
My lessons combine proven hands-on field experience from major industrial infrastructure projects with cutting-edge AI technologies to help you streamline coding, optimize design workflows, and solve engineering and business challenges efficiently. Whether you need help preparing for exams, completing a graduation capstone project, or acing technical job interviews in the industrial automation sector, we will build a custom roadmap to reach your objectives.