Maths, Physics, Further Mathematics, Sciences and Electrical and Electronics Engineering Tutoring for all. I also write project reports.

From 31 C$ /h

I specialize in tutoring Maths, Physics, Further Mathematics, Sciences and Electrical and Electronics Engineering. I teach students at primary school, secondary school and university level. I teach at IGCSE, GCSE, AS and A levels. I also teach undergraduate students as well as students preparing for exams.
My strength is in the areas of friendly relationships with students and breaking complex things to simple things for students, I give class exercises and homeworks to test students' understanding. I derive a lot of joy in the success of my students and my students' success rate is very high.

Extra information

Have a laptop with good internet connection so I can teach you online with ease.

Location

Online from Nigeria

About Me

I'm Jelil Lanre.

I have experience of over 16 years in teaching and tutoring both offline and online and about 5 years of experience in online tutoring.

I studied Electrical and Electronics Engineering with Distinction in my Masters degree and First Class in my First degree and I'm currently a lecturer in the university in Nigeria and I'm a fully registered Engineer with Council for the Regulation of Engineering in Nigeria (COREN).

I teach Maths, Physics, Further Mathematics and secondary school sciences. I also teach engineering courses at the university. I can also teach the above-mentioned subjects at IGCSE, AS & A Levels.

I'm familiar with both Cambridge and Edexcel curricula.

Education

Master of Engineering in Electrical and Electronics Engineering (2023), Distinction (76%).
Bachelor of Engineering in Electrical and Electronics Engineering (2015) First Class Honours.

Experience / Qualifications

MEng, BEng,. Examiner with Cambridge in the UK in Mathematics at O level and AS and A levels. A teacher of over 16 years experience both online and offline. A certified teacher to teach Cambridge Mathematics at AS and A levels. Familiar with British curriculums.

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Skills

Math

Physics

Electrical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Engineering for Engineering undergraduate students

48 C$ /h

Engineering is the application of science discoveries. One of the fields under it is Electrical Engineering. In this class, you will learn about the fundamentals of circuits and various circuit theorems and how to apply these theorems to solve various circuits.

Ansh

4.86

(7)

Applied Power Electronics & Motion Digital Signal Processing
Electrical & Electronic Power Systems Telecommunications
Microwave Electronics Control Engineering, with all electrical subjects on need basis.
apart from that live and practical’s are also available at coding level like VHDL,System verilog digital electronics.

Matías

4.86

(7)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Monther

4.86

(7)

Teaching electrical and electronic engineering subjects through examples and practical explanations
Examples of subjects that I can teach in Arabic and English:
Microcontroller - Arduino - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C
And some other core subjects for electrical and electronic engineering major

I am able to teach the Electrical and Electronics Engineering Subject with practical examples, some courses that I can teach:
Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C.

4.86

(7)

Hello, I am a doctor in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (electronics, automation, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Adam

4.86

(7)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Anh

4.86

(7)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

عبدالرحمن

4.86

(7)

He holds an honors degree in electrical engineering, electronics and communications. More than 15 years of experience. I teach engineering students and technicians. I also teach mathematics in all its branches, algebra and engineering for Arabic education and languages for all educational levels.
I have trained students in universities and graduated engineers practically and theoretically, and I have achieved various successes, thanks to God, with the students and raising their level. The lesson or lecture can be given face to face or online.
Depending on the conditions available to students

Ahmed

4.86

(7)

Learn from the ground up, starting with the fundamentals of electronics and various electronic components.
Understand the necessary electrical connections to design and program smart home and Internet of Things (IoT) circuits.
Explore what Arduino is and the programming language used to control it.
Discover how to create programs to control home devices using a mobile phone.

Training includes working with real Arduino circuits as well as using simulation software.
I offer practical and simplified training that starts from the fundamentals of electronics and progresses to designing and programming smart home and Internet of Things (IoT) systems. The course includes clear theoretical explanations and hands-on applications using real circuits and digital simulation software.

Course Content

Electronics Fundamentals

Introduction to essential electronic components: resistors, capacitors, diodes, transistors, and sensors

Understanding proper electrical connections

Reading electronic circuits and using the breadboard

What is Arduino and How Do We Program It?

Introduction to Arduino boards

Explanation of the C/C++ programming language used for Arduino

How to upload code and test projects step by step

Designing and Programming Smart Home Circuits

Connecting sensors and smart switches

Controlling lighting and household devices

Designing a system to control the home using a mobile phone

Introduction to IoT and integrating it with home automation

Mobile Phone Home Control

Creating simple control interfaces

Connecting using Wi-Fi or Bluetooth

Turning devices on and off and monitoring sensors remotely

Practical Training

Working with real Arduino circuits

Using simulation software such as Tinkercad and Proteus

Building ready-to-use practical projects

Who Is This Course For?

Beginners in electronics

Students interested in learning Arduino programming

Anyone who wants to build a smart home project

Anyone looking to understand how electronics work in a simple and practical way

Ali

4.86

(7)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

Baryalai

4.86

(7)

The High Voltage Substation Project encompasses all key stages from initiation to completion, including project design, procurement, installation, and implementation. It begins with the development of detailed designs and cost estimations to ensure technical and financial feasibility. The procurement phase focuses on sourcing high-quality equipment and materials in compliance with international standards. Installation and implementation are carried out with strict adherence to safety and reliability requirements. Additionally, on-demand technical support is provided throughout the project lifecycle to ensure efficient operation, timely issue resolution, and optimal performance of the substation system.

Abdelmalek

4.86

(7)

This hands-on training pathway is designed to help students kickstart any project, specifically tailored for OT labs and industrial applications. Starting from absolute scratch, students will build a strong foundation in Python programming through practical, industry-relevant concepts.

Curriculum Outline: |
01 - Python Environment Setup & Basics |
02 - Python Variables, Numbers, Bytes & Hex |
03 - Control Flow Logic Functions |
04 - Data Structures (Lists, Tuples, Dictionaries & Sets) |
05 - String Formatting, Comprehensions & Exception Handling |
06 - File IO, Pathlib & Context Managers |
07 - Object-Oriented Programming (Classes & OOP) |
08 - Standard Library, Modules & Networking Basics |

Assessment & Evaluation:
Students will take a mini-test after the completion of each module. Additionally, an Audit & Performance Evaluation report will be sent following the tests.
Duration:
5 days to 15 days (depending on the pace of the cohort)

Henoc

4.86

(7)

Electricity Teacher - Live Lessons from a Real Classroom

TIRED OF CLASSES IN FRONT OF A BLANK SHEET OF PAPER?

I give my lessons LIVE from a classroom with a blackboard and chalk.
Like at school, but with Google Meet at home.

FOR WHO ?
MIDDLE SCHOOL / HIGH SCHOOL: Circuits, laws, safety, reading diagrams
Vocational Baccalaureate: Power diagram, control diagram, wiring, installation
BTS: Industrial diagrams, motor starting, relays and contactors

MY METHOD:
We're working on YOUR exercises. I'll explain them to you step by step on the board.
Clear and concrete explanations with examples from construction sites.
You see everything I write and you leave with photos from the course.

HOW DOES IT WORK?
100% online course via Google Meet.
Professional quality: Sound + Image + Visible painting.
Opening hours: Evenings and weekends, French time.

Levels: Beginner to Advanced. First lesson to try it out.

Dhanush

4.86

(7)

Electrical engineering is a current trend and upcoming future necessity for people day to day life. so I will teach about how our electrical engineering help our day to day life and it remain use full and safe to our environment and people . People of this world must know about safety measures of electrical system. Also I will teach how to protect our environment and nature by using electrical engineering concept. The above content what I mentioned is learned by future students and taught by me.

يحيى

4.86

(7)

Lesson title:
General Physics for University Students (Physics 101 & 102) - The Complete Guide to Mastering Concepts, Solving Complex Problems, and Guaranteeing A+ Exams

Detailed lesson description:
Do you feel that the general physics course is an obstacle to your academic achievement? Do you find it difficult to connect theoretical laws and apply them to complex exam problems in English? Do you suffer from time constraints during exams or difficulty in extracting data correctly?

Don't worry! This comprehensive and intensive course is specifically designed to be your first and complete reference for passing the General Physics I & II courses with the highest distinction (A+), and turning physics from a source of anxiety into a strength in your GPA.

---

First: Topics covered in the General Physics 1 course (Physics 101 - Mechanics and Heat):

1. Vectors and Physical Quantities:
Understanding scalar and vector quantities and their applications.
- Adding and subtracting vectors structurally and computationally (Vector Addition & Components).
- Standard multiplication and cross product (Dot Product & Cross Product) and their direct uses.

2. Movement in one dimension and two dimensions (Kinematics in 1D & 2D):
- Equations of motion with constant acceleration.
- Free Fall & Projectile Motion.
Uniform Circular Motion and Determination of Acquired Acceleration Directions.

3. Newton's Laws of Motion and their applications:
- Newton's first, second and third laws and the formulation of the free-body diagram.
- Applying forces to different axes and dismantling the vehicles.
- Dealing with static and kinetic friction forces, inclined surfaces, and suspended masses.

4. Work, Energy & Conservation of Energy:
- Calculating the work done by constant and variable forces.
- Kinetic and Potential Energy.
- The principle of conservation of mechanical energy and its applications in the presence and absence of friction.

5. Linear Momentum & Collisions:
- Definition of momentum and calculation of impulse (Momentum & Impulse).
- Elastic and inelastic collisions in one dimension and two dimensions (Elastic & Inelastic Collisions).
- Calculating the center of mass for systems and particle systems.

6. Rotational Motion and Torque:
- Speed, angular acceleration, and the relationship between them and linear quantities.
- Bending moment, shear moment, and inertia moment.
- Applying Newton’s second law to rotational motion and the conservation of angular momentum.

---

Second: Topics covered in the General Physics 2 course (Physics 102 - Electricity and Magnetism):

1. Electric Charge and Coulomb's Law:
- Properties of electric charges and the laws of attraction and repulsion.
- Calculating the net electric force resulting from a group of point charges (Superposition Principle).

2. Electric Field and Gauss's Law:
- Calculating the electric field strength for point charges and continuous charge distributions.
- Electric flux and applications of Digges' law to spherical, cylindrical and planar surfaces.

3. Electrical Potential and Potential Energy:
- The difference in electrical potential and the work done to move the charges.
- Calculating the electrical potential resulting from the different distributions of conductive and insulating surfaces.

4. Capacitors and Dielectrics:
- Capacitor capacity and methods of connecting capacitors in series and parallel (Series & Parallel Capacitors).
- Energy stored in the electric field and the effect of introducing dielectric materials on capacitance and voltage.

5. Electric current and electrical circuits (Current, Resistance & DC Circuits):
- Ohm's Law and the difference between resistance and resistivity.
- Analyzing complex electrical circuits using Kirchhoff's Voltage & Current Laws.
- Capacitor charging and discharging circuits (RC Circuits).

6. Magnetic Field and Magnetic Forces:
- The magnetic force acting on moving charges and wires through which a current flows (Lorentz Force).
- The movement of charges in uniform magnetic fields.
- Biot-Savart Law and Ampere's Law for calculating magnetic fields.

---

Advantages of the teaching method and services provided in this course:

* Simplifying and deconstructing concepts: Transforming complex laws and dry theories into simplified ideas explained in Arabic while maintaining complete directness and professionalism in dealing with English terminology.
* Exam-style training: Solving hundreds of problems and concepts ranging from beginner to advanced levels and levels for outstanding students.
* Solving Past Papers: A comprehensive review of past years’ questions from various universities and coverage of midterm and final exam concepts.
Overcoming the obstacle of multiple choice (MCQs): Introducing critical thinking strategies, quick problem-solving, and techniques for eliminating incorrect answers to deal with time pressure in electronic and paper tests.
* Support and follow-up: Answering student inquiries, explaining school and university assignments (Assignments & Homeworks), clarifying weaknesses and addressing them immediately.

Who is this course for?
This course is aimed at all first and second year students in engineering colleges (mechanical, electrical, civil, aviation, computer), science college students (physics, mathematics, chemistry), technological and technical college students, and every student who seeks to break the barrier of fear of physics and reach the top by obtaining the highest grade.

Keywords (Tags):
Physics 101, Physics 102, General Physics, University Physics, Physics 101, Physics 102, Mechanics, Electricity and Magnetism, Engineering, University, Physics Exams, Physics Problem Solving, Past Papers, Calculus-based Physics, Coulomb, Newton, Kirchhoff, Diving, Piots Savar, EmSAT, Physics Tests, University Physics Explanation, Physics Questions and Answers, Physics Homework, General Physics I, General Physics II

Mayank

4.86

(7)

In this 30-minute class, we will understand the two core components of a microprocessor: the ALU (Arithmetic Logic Unit) and the Control Unit. I will explain their structure, functions, and how they work together to execute instructions, using simple diagrams and practical examples. The goal is to build a clear understanding of how a microprocessor processes and controls data.