MATHEMATICS TUTORING! FROM PRIMARY ALL THE WAY TO HIGH SCHOOL! SUBMIT OUR DOUBTS AND HAVE THEM CLEARED ASAP!
From 50 C$ /h
Mathematics is a wonderful subject. As a student, you may feel that it is pointless, but believe me. it helps you a lot. But, it is sad to see all the students fearing Mathematics. I was fortunate enough to have had good teachers who never let Math become a demon in my life. Through these classes, I want to play the same role in your lives as well.
My name is Nispruha and I am working as an Engineer at Tata Technologies Private Limited, Warwick. I have a Bachelors in Mechanical Engineering and a Masters in Computational Fluid Dynamics. I have always embraced Mathematics whenever possible, until now. I have consistently scored distinction throughout my school and college days in Mathematics and also in my Bachelors. I am not saying this to boast or something, I am just giving you an assurance that your doubts will be taken seriously and answered in a manner that you understand.
I will help you out with any question or doubt from Primary to High School Mathematics. All you have to do is jot down your doubts or topics that seems complicated to you. I will do my best to clear it out!
My name is Nispruha and I am working as an Engineer at Tata Technologies Private Limited, Warwick. I have a Bachelors in Mechanical Engineering and a Masters in Computational Fluid Dynamics. I have always embraced Mathematics whenever possible, until now. I have consistently scored distinction throughout my school and college days in Mathematics and also in my Bachelors. I am not saying this to boast or something, I am just giving you an assurance that your doubts will be taken seriously and answered in a manner that you understand.
I will help you out with any question or doubt from Primary to High School Mathematics. All you have to do is jot down your doubts or topics that seems complicated to you. I will do my best to clear it out!
Extra information
Classes will be online
Location
Online from United Kingdom
About Me
Hello!
My name is Nispruha and I am from India. I am working as an Engineer at TATA Technologies at Warwick. I am 24 years old, which means I have just completed my education. Why is that important?
- I know what a student goes through.
- I can relate better to your problems
- Since I understand your problems, I will come up with solutions and present it to you in a way you understand.
Honestly, Math was not my favorite subject in the beginning but when I actually sat down to sit and do the problems, I found out Math is the easiest. It is only one of the few subjects where you can be sure if you have the correct answer or not!
I will teach you all the tips and tricks to not only get the answer but also make sure that you have the CORRECT answer!
My name is Nispruha and I am from India. I am working as an Engineer at TATA Technologies at Warwick. I am 24 years old, which means I have just completed my education. Why is that important?
- I know what a student goes through.
- I can relate better to your problems
- Since I understand your problems, I will come up with solutions and present it to you in a way you understand.
Honestly, Math was not my favorite subject in the beginning but when I actually sat down to sit and do the problems, I found out Math is the easiest. It is only one of the few subjects where you can be sure if you have the correct answer or not!
I will teach you all the tips and tricks to not only get the answer but also make sure that you have the CORRECT answer!
Education
MSc Computational Fluid Dynamics: Cranfield University (Oct 2021 – Sept 2022)
Outcome: 2:1 Degree
1. Riemann Solver Wave Speed Estimates for ultra-high-speed flows. (Individual Research Project, Masters)
Worked to reduce instabilities in Riemann Solvers. Focused on mitigating the carbuncle phenomenon for optimal results. Gained expertise in hyperbolic conservation laws, numerical methods for shock capturing, Godunov's Method, and Riemann solvers throughout the project.
2. CFD analysis of the SpaceX Falcon Heavy Rocket Launch Group Project, Masters)
Part of a group project simulating the SpaceX Falcon Heavy launch. I cleaned and prepared rocket geometry using Solidworks The normal aerodynamic loads and the pressure distribution on the rocket was calculated.
B.E. (Mechanical): Ramaiah Institute of Technology (Sept 2017 - Aug 2021)
Outcome: 8.89 GPA
1. Aerodynamic development of a Formula SAE Car, (Final Semester Project, Bachelors)
• This project presents the process of developing an aerodynamic package and a suspension system for a Formula SAE race car, with the help of computational methods for the aerodynamic design and analytical methods for suspension design.
• My responsibilities included conducting the 2D simulations for the Front and Rear wing profiles and laying the foundation for the 3D simulations as well. I also took the responsibility of typing and compiling a very thorough report for our Project. This Project drove me to take up CFD as my Masters subject
Outcome: 2:1 Degree
1. Riemann Solver Wave Speed Estimates for ultra-high-speed flows. (Individual Research Project, Masters)
Worked to reduce instabilities in Riemann Solvers. Focused on mitigating the carbuncle phenomenon for optimal results. Gained expertise in hyperbolic conservation laws, numerical methods for shock capturing, Godunov's Method, and Riemann solvers throughout the project.
2. CFD analysis of the SpaceX Falcon Heavy Rocket Launch Group Project, Masters)
Part of a group project simulating the SpaceX Falcon Heavy launch. I cleaned and prepared rocket geometry using Solidworks The normal aerodynamic loads and the pressure distribution on the rocket was calculated.
B.E. (Mechanical): Ramaiah Institute of Technology (Sept 2017 - Aug 2021)
Outcome: 8.89 GPA
1. Aerodynamic development of a Formula SAE Car, (Final Semester Project, Bachelors)
• This project presents the process of developing an aerodynamic package and a suspension system for a Formula SAE race car, with the help of computational methods for the aerodynamic design and analytical methods for suspension design.
• My responsibilities included conducting the 2D simulations for the Front and Rear wing profiles and laying the foundation for the 3D simulations as well. I also took the responsibility of typing and compiling a very thorough report for our Project. This Project drove me to take up CFD as my Masters subject
Experience / Qualifications
TATA TECHNOLOGIES LIMITED: Graduate Engineer (Sept 2023 – Present)
Working as a Graduate Engineer in the Chassis and Steering Department. My responsibilities include
• Working on different steering systems and EPAS systems.
• Assisting my manager and taking the lead on Customer or Supplier meetings
• Working on a Graduate Innovation Project regarding Challenges in Electric Vehicle charging.
• Aiding in the creation of Pitch Decks to help pitch the capabilities of our department to several OEMs.
TSYS MS MEA Ltd: Customer Service Representative (Jan 2023 – Jun 2023)
Had the privilege of working as a Customer Service Representative, on behalf of the Nationwide Building Society. Responsibilities included:
• Taking calls from customers and assisting them in every way possible with respect to their credit cards.
• Take calls from different branches and solving customer problems.
• Handling credit card accounts of all members of the Nationwide Building Society.
BEML LTD: Summer Intern (July 2019 - August 2019)
BEML Limited, formerly Bharat Earth Movers Limited, is an Indian Public Sector Undertaking, which manufactures a variety of heavy equipment, such as that used for earth moving, transport and mining and state-of-the-art military equipment.
• Spent one month at BEML Rail coach Division and observed the functioning of a PSU first-hand. Identified and correlated concepts learned in college and witnessed the working of Heavy Machinery
• Interacted with trainees and senior employees to gain a deeper understanding of the functions of each of the hangars in the factory.
• Learned basic concepts of Enterprise Resource Planning (ERP) and observed the way SAP systems were implemented in the company.
Working as a Graduate Engineer in the Chassis and Steering Department. My responsibilities include
• Working on different steering systems and EPAS systems.
• Assisting my manager and taking the lead on Customer or Supplier meetings
• Working on a Graduate Innovation Project regarding Challenges in Electric Vehicle charging.
• Aiding in the creation of Pitch Decks to help pitch the capabilities of our department to several OEMs.
TSYS MS MEA Ltd: Customer Service Representative (Jan 2023 – Jun 2023)
Had the privilege of working as a Customer Service Representative, on behalf of the Nationwide Building Society. Responsibilities included:
• Taking calls from customers and assisting them in every way possible with respect to their credit cards.
• Take calls from different branches and solving customer problems.
• Handling credit card accounts of all members of the Nationwide Building Society.
BEML LTD: Summer Intern (July 2019 - August 2019)
BEML Limited, formerly Bharat Earth Movers Limited, is an Indian Public Sector Undertaking, which manufactures a variety of heavy equipment, such as that used for earth moving, transport and mining and state-of-the-art military equipment.
• Spent one month at BEML Rail coach Division and observed the functioning of a PSU first-hand. Identified and correlated concepts learned in college and witnessed the working of Heavy Machinery
• Interacted with trainees and senior employees to gain a deeper understanding of the functions of each of the hangars in the factory.
• Learned basic concepts of Enterprise Resource Planning (ERP) and observed the way SAP systems were implemented in the company.
Age
Children (7-12 years old)
Teenagers (13-17 years old)
Adults (18-64 years old)
Seniors (65+ years old)
Student level
Beginner
Intermediate
Advanced
Duration
45 minutes
60 minutes
90 minutes
120 minutes
The class is taught in
English
Hindi
Kannada
Telugu
Skills
Availability of a typical week
(GMT -04:00)
New York
Mon
Tue
Wed
Thu
Fri
Sat
Sun
00-04
04-08
08-12
12-16
16-20
20-24
Good-fit Instructor Guarantee