Renewable Engineering: Wind and Solar PV Energy Production

I am Engineer Abdel Rahman Abdel Aal, a university instructor specializing in explaining engineering subjects in a simplified and interactive manner via Zoom. God willing, our lessons aim to provide a deep and systematic understanding of the curriculum content, through simplified and interactive explanations that adapt to each student's level. 🔹 Short tests are given periodically to measure understanding and stimulate concentration, while clarifying the differences between similar concepts to prevent distraction. 🔹 I rely on various examples, patience, and gradual delivery of information in my explanation, until the student reaches full understanding with confidence. 🔹 There is continuous follow-up via WhatsApp or Telegram throughout the semester to answer questions and help the student with studying and solving problems as they occur. 💻 The explanation is conducted online via Zoom, with a full recording of each session provided, so that the student can review it at any time. 🎯 Our goal is not just to pass the subject, but to excel in it and understand it in an easy and consistent manner, God willing.

If you want to lear the profession, which can't be replaced by AI, here I am to help you with that. If you want to master(or learn) electrical engineering with the essential skills needed to effectively utilize Revit and AutoCAD in the design and documentation of electrical systems within building projects, book first lesson with me. Through a combination of theoretical knowledge and practical hands-on exercises, students will learn how to leverage the powerful features of both software tools to create detailed electrical designs, generate accurate drawings, and collaborate seamlessly with other stakeholders in the construction process. Key topics covered include: - Fundamentals of electrical engineering principles and standards. - Introduction to Building Information Modeling (BIM) concepts and workflows. - Utilizing Revit for electrical system design, including lighting, power distribution, and circuiting. - Integrating AutoCAD for detailed drafting, annotation, and documentation of electrical plans. - Performing electrical load analysis and simulation to ensure system efficiency and compliance. - Best practices for organizing, managing, and sharing electrical project data effectively. Whether you are a beginner electrical engineer looking to enhance your skills or a newcomer to Revit and AutoCAD seeking to specialize in electrical design, working with me will provide a solid foundation to excel in the field of building services engineering. For more information, please do not hesitate to text me.

• Empowered engineering and STEM students through personalized, high-impact tutoring in mechatronics, electronics, robotics, and applied mathematics. • Translated complex concepts into real-world problem-solving techniques, boosting student performance and technical confidence. • Mentored students on academic projects involving CAD (Creo/SolidWorks), embedded systems, and MATLAB/Simulink applications. • Developed customized learning paths, resulting in improved grades and stronger conceptual foundations across multiple technical disciplines. • Built a reputation for making engineering make sense—combining technical depth with engaging instruction.

In these tailored Engineering sessions, I combine tutoring with mentoring to guide your technical understanding and foster your growth in key engineering concepts. My approach adapts to your natural learning style, ensuring that each lesson is intuitive, engaging, and effective. With over 10 years of experience in Aerospace, Mechanical, and Electrical engineering, I bring a wealth of both academic and real-world expertise to our sessions. I’ll share insights from the Aerospace, Maritime, and Aviation industries to help you develop practical skills and problem-solving techniques, tailored to your needs. Whether you're studying: • Aerospace Engineering • Aeronautical Engineering • Mechanical Engineering • Electrical Engineering • other types of Engineering Or need help with areas like control systems or data analysis, I’m here to guide you through any engineering challenge. My lessons are customized to fit your learning style and academic goals, ensuring you leave each session feeling confident and prepared. Contact me now for availability, and let's schedule your first session soon. I look forward to working with you! __________________________________________________________________________________ I'm actively supporting students from top universities worldwide, including: UK: • Imperial College London (+ Business School) (ICL) • University College London (UCL) • King’s College London (KCL) The Netherlands: • Delft University of Technology (TUDelft) • University of Amsterdam (UvA) • University of Groningen (RUG) Switzerland: • ETH Zurich - Swiss Federal Institute of Technology Australia: • Queensland University of Technology (QUT) • University of Queensland (UQ) • Griffith University __________________________________________________________________________________ My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential. I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student. I work as an Engineering Specialist/Consultant, holding: • Master’s degree in Aeronautical Engineering from Imperial College London, • AAA* A-Level in Further Maths and Physics, Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics. Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects. Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies. Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life. Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life. Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently. Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Industrial engineering at the university level is the branch of engineering that focuses on the design, improvement, implementation, and operation of production systems for goods and services. Its main objective is to optimize efficiency, increase productivity, and reduce costs in various organizations. Industrial engineers apply knowledge in areas such as operations management, methods and quality engineering, project management, and business administration. My tutoring sessions cover basic sciences (mathematics and physics), thermodynamics, and general subjects related to industrial engineering.

Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering: •Electrical Engineering Basics •Conductor, Isolator, and Semiconductor Physics •AC Passive components: Inductors, Capacitors and Resistors •DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches) •Three-phase systems •Diodes and the PN Junction •Transistor Physics: BJT/IGBT/MOSFET •Operational Amplifiers •Electronic Circuitry (Buffers, Signal Amplifiers, etc) •Transformer and Electromagnetics Basics

..................................... (satisfied or refunded)........ ....... Electrical engineering expert PhD student in electrical engineering and renewable energies engineer in electrical engineering and industrial computing I offer home schooling courses to deal with the difficulties encountered by students during their schooling, These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams. ===Automatic (Servo-control and automatism regulation (discrete, continuous)======== ===Electrical engineering (electrical machines) and power electronics (inverter rectifier)======= ===Continuous and sampled signal processing================= ===VHDL programming, microcontroller and microprocessor (intel, ARM)============ ===High frequency electronics (transistor, diode, AOP, noise)============ ===Propagation of electromagnetic waves and antennas======== ===Analog and digital electronics (filters, flip-flops, sysml,Grafcet,amplifier)===== === Realization of electrical projects ===MATLAB ARDUINO Proteus ISIS === Renewable energies COURSE OBJECTIVES AND PEDAGOGICAL APPROACH Resumption and deepening of fundamental concepts through exercises with course reminders. Put the student in a situation of questioning and research. Respond to individual issues and questions Exercise training in order to achieve real mastery of the content. Learn to build theoretical reasoning from observable facts or hypotheses. Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background) This pedagogical approach is effective since it has often led me to interesting results with my students.

Lessons for mechanical, industrial and electrical engineering students. Ability to understand and communicate information easily and smoothly, God willing. Five years of experience teaching engineering college courses at various universities in Saudi Arabia, Kuwait, Cairo and the Emirates. Holds a master's degree and a preliminary doctorate.

Basics of electronics engineering, Arduino programming, and smart home circuits Start learning from the basics of electronics and various electronic components And the electrical connections required to design and program smart home and Internet of Things circuits What is Arduino and what language is required to program it? How to design programs to control the home through a mobile phone Training on real Arduino circuits and also on simulation programs

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems. - Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws. - Electronic components: Resistors, capacitors, inductors, diodes. - Operational amplifiers: Operation, characteristics, applications. - Basic analog circuits: Amplifiers, filters, oscillators. - Introduction to digital electronics: Binary logic, logic gates, combinational circuits. - Numbering systems: Conversion between bases, adders, subtractors. - Transistors: Bipolar transistors, field effect transistors, characteristics, applications. - Transistor amplifiers: Configuration, gain calculations, stability. - Analog integrated circuits: Voltage regulators, A/D and D/A converters. - Sequential digital systems: Flip-flops, registers, counters. - Microcontrollers and microprocessors: Architecture, basic programming, interfaces. - Analysis of electronic circuits: Frequency and time analysis methods. - Advanced analog circuits: Differential amplifiers, power amplifiers, active filters. - Modulation and demodulation techniques: AM, FM, PM. - Embedded systems: Design of real-time systems, communication between peripherals. - Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators. -

I'm an experienced tutor and Aerospace Engineer working as a control engineer in the space business. I hold a 5-year experience tutoring more than 60 engineering undergrad students, helping them understand the technical contents and prepare for their exams. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Among the subjects I've previously taught you can find Controls, Flight Mechanics, Fluid Mechanics, Design, Aerospace Structures, among many others. I've also helped students with their dissertations and even mentored students in their transition to the profesional world. __________________________________________________________________________________ Previously supported students in Aerospace, Mechanical, Electrical Engineering, among others, from universities like: UK: - University of Bristol - Swansea University - Imperial College London (+ Business School) - University College London - King's College London NL: - Delft University of Technology SW - ETH Zurich - Swiss Federal Institute of Technology ES: - Universidad Carlos III de Madrid - Universidad Politécnica de Madrid

Are you in preparatory classes (CPGE) and want to excel in Engineering Sciences? I offer personalized courses to support you in key subjects, with a pedagogy adapted to your academic needs and your objectives. Modules taught: 🔧 Strength of Materials (RDM): Analysis of stresses, deformations and dimensioning of structures. ⚙️ Elasticity: Study of elastic solids and resolution of stress and deformation problems. 🌊 Fluid and solid mechanics: Fundamental concepts and applications in the field of fluid structures and systems. 💻 Industrial computing: Programming, automation and simulation of industrial systems. Highlights of my courses: ✔️ Methodical and structured approach adapted to the CPGE program. ✔️ Typical exercises and solving complex problems. ✔️ Specific preparation for competitive examinations for major engineering schools. ✔️ Clear and detailed teaching materials provided in each session. For who ? 🎓 Students in scientific preparatory classes (CPGE). 🏫 Students and professionals looking to strengthen their knowledge in SII. Course organization: Format: Individually or in small groups. Modalities: Online or in person depending on your preferences. Flexibility: Classes tailored to your schedule.

Teaching electrical and electronic engineering subjects through examples and practical explanations Examples of subjects that I can teach in Arabic and English: Microcontroller - Arduino - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C And some other core subjects for electrical and electronic engineering major I am able to teach the Electrical and Electronics Engineering Subject with practical examples, some courses that I can teach: Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C.

God willing, it is possible to explain the subjects of the Communications Department, such as antennas, electromagnetic waves, mobile phone communications, signal analysis, electromagnetic fields, and some subjects of Electrical Engineering, such as electrical circuits, forces, and electrical machines, and some subjects of the Computers Department, such as programming. It is also possible to explain the subjects of Engineering Mathematics.