Tutoring in Electrical Engineering, Circuit Theory, Analogue and Digital Electronics

From 44 C$ /h

I graduated in Electrical Engineering and Electronics and Telecommunications at the University of Science and Technology(AGH). I will give tutoring in the theory of electrical circuits, electrical engineering and analog and digital systems. I provide additional materials. Welcome.

Scope of assistance:
- Electronic semiconductor components
- Bipolar transistor - working point setting, small signal description, common collector, common emitter, common base
- Differential amplifier - transition zone, polarization methods
- Operational amplifier - circuits with an operational amplifier, negative feedback, non-linear amplifier application
- Linear and pulse stabilizers
- Analog electronic circuits
- Digital electronic circuits
- ADC / DAC converters
- Current, voltage and magnetism issues
- Non-isolated converters (boost, buck and buck-boost, SEPIC)
- Non-isolated converters (flyback, forward, full-bridge, half-bridge, Push-Pull, Ćuk)
- Resonant and ferroresonant converters
- selective amplifiers
- power amplifiers
-stabilizers with continuous work
- PLL phase coupling loop
- network rectifiers
- switching power supplies
-high frequency technique and fast switching
- Kirchoff's laws, delta-star / star-delta transform
- Thevenin's theorem
- loop potential method
- the method of nodal potentials
- methods of solving DC and sinusoidal current circuits,
- crosses and filters
- circuits containing magnetically coupled coils
- operational amplifiers
- transmission properties of linear systems
- three-phase,
- the phenomenon of resonance,
- vector (phasor) charts of currents and voltages,
- transient states - classical method
I also provide assistance in the field of:
- matlaba / simulinka, scilab, LTSpice, PSpice, Spice, Tina-TI, Falstad Simulator
- Interfaces: CAN, I2C, SPI, UART
- ADC converter
- designing electronic diagrams in EAGLE, Altium.

If you have any questions, write to me - I will answer up to 24 hours

To facilitate cooperation, please include in the e-mail:
- topics that I am supposed to help with, if you have tasks, you can attach them in the e-mail
- since when you need help and for how long

Extra information

We work on Skype, Teams or Messenger and write together on a virtual board, which allows you to quickly write, paste content and draw (I use a graphic tablet). Each of my students receives a link with notes from all meetings. All you need to do such lessons is a browser and a microphone.
Benefits?
- I can see what you write right away and I am able to notice mistakes faster.
- In my experience, students stress much less when working in this form while sitting in front of their computer
- You don't waste time commuting
- I have more dates for such lessons and it will be easier to make an appointment.

Location

Online from Poland

About Me

I have been tutoring actively for 6 years. I work professionally as a designer of electronic and power electronics systems. Currently, I am developing autonomous driving at Aptiv company.

Education

- diploma of M.Sc. Of Electrical Engineering AGH, completed the specialization: Power Electronics and Electric Drive
- Diploma of Eng. Electrical engineering; completed module A (electrical networks)
- Engineering degree in Electronics and Telecommunications (Electronics specialization)
- laureate of the sessions of the AGH University of Science and Technology 2014, 2015

Experience / Qualifications

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

30 minutes

45 minutes

60 minutes

90 minutes

120 minutes

The class is taught in

English

Polish

Skills

Electrical engineering

Electrical circuits

Electronic circuits

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Youssef

4.85

(13)

I offer teaching courses in electrical engineering and electronics (private lessons or holiday courses) to deal with the difficulties encountered by students during their schooling, as part of an individual follow-up that respects the rhythm specific to each.
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Marko

4.85

(13)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Adam

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Ali

4.85

(13)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

Ahmed

4.85

(13)

Fundamentals of electronics engineering, Arduino programming, and smart home circuits

I offer practical and simplified training that starts from the basics of electronics and goes up to the design and programming of smart home and Internet of Things systems, with theoretical explanations and practical applications on real circuits and digital simulations.

Course content:
1. Fundamentals of Electronics

Identifying different electronic components: resistors, capacitors, diodes, transistors, and sensors.

Understanding correct electrical connections

Reading electronic circuits and working with breadboards

2. What is Arduino? And how do we program it?

Introduction to Arduino boards

Explanation of the C++ programming language used with Arduino

How to download code and test projects step by step

3. Design and programming of smart home circuits

Connecting sensors and smart switches

Lighting and electrical appliance control

Designing a system that controls the home using a mobile phone

Introduction to the Internet of Things (IoT) and its connection to home control

4. Controlling the home from a mobile phone

Creating simple control interfaces

Connect using Wi-Fi or Bluetooth

Remote device operation and sensor monitoring

5. Practical training

Real Arduino circuit experiment

Using simulation software such as Tinkercad and Proteus

Practical projects ready for implementation

Who is this course for?

Beginners in the field of electronics

Students interested in Arduino programming

Who wants to create a smart home project?

Anyone who wants to understand how electronics work in a simple and practical way

Thelma

4.85

(13)

Struggling with Physics? Let's work towards better grades together!
Hi, I'm Thelma, and I offer supportive online mathematics lessons for students studying GCSE, IGCSE, AS and A-Level Physics.
Whether you're struggling with the basics, finding algebra confusing or preparing for an important examination, my lessons are designed around your learning needs and goals.

• We will focus on;

📘 GCSE & IGCSE Physics
We can work on:
•
•
•
•
•
•

📗 AS & A-Level Physics
Topics include:
•
•
•
•
•
•

🎯 Exam Preparation
We will practice exam-style questions, review challenging topics, identify areas for improvement and work through solutions step by step. Where appropriate, we will use past papers from your examination board, including Pearson Edexcel, AQA and OCR.

💻 What to expect in my lessons
• Clear, step-by-step explanations
• Interactive online teaching and worked examples
• Practice questions suited to your level
• Lessons tailored to your goals
• Support with revision and homework questions

Whether you need help understanding a topic or want structured exam preparation, we can focus on the areas where you need the most support.
Ready to improve your understanding of Physics? Book a lesson, tell me your exam board and the topics you find difficult, and let's get started!

Dhanush

4.85

(13)

Electrical engineering is a current trend and upcoming future necessity for people day to day life. so I will teach about how our electrical engineering help our day to day life and it remain use full and safe to our environment and people . People of this world must know about safety measures of electrical system. Also I will teach how to protect our environment and nature by using electrical engineering concept. The above content what I mentioned is learned by future students and taught by me.

Amir

4.85

(13)

Physics is a fascinating subject that helps us understand how the world around us works. As an experienced scientist with a passion for teaching and sharing science, I enjoy helping students develop a deeper and more intuitive understanding of physics. My lessons cover topics including classical mechanics, optics, electromagnetism, quantum mechanics, and quantum optics, and can be tailored to your level and learning goals. Whether you are preparing for an exam, studying at university, or simply curious about physics, I focus on clear explanations, problem-solving, and making even challenging concepts easier to understand.

Uma

4.85

(13)

Electronic, communication systems,electromagnetic fields , embedded system, digital electronic, digital signal processing, digital image processing,optical communication, signals and systems,applied electronics, microwave engineering,TLN,radio engineering

Mayank

4.85

(13)

In this 30-minute class, we will understand the two core components of a microprocessor: the ALU (Arithmetic Logic Unit) and the Control Unit. I will explain their structure, functions, and how they work together to execute instructions, using simple diagrams and practical examples. The goal is to build a clear understanding of how a microprocessor processes and controls data.

Hend

4.85

(13)

In this lesson we cover the basics of statics, the science that studies stationary objects under the influence of different forces, and is the cornerstone of engineering subjects such as mechanics and construction.
What you will learn in this lesson:
• The concept of power, its types, and methods of representing it
• Analyzing forces into their components
Conditions for equilibrium of bodies
• Solve practical examples step by step
The lesson is suitable for engineering students of all specializations, and for anyone who wishes to build a strong understanding of the material before moving on to advanced subjects.

Niranjan

4.85

(13)

Hi! I am an electronics engineer and Master's student in Electronics Engineering at the University of Pavia, Italy, with approximately 7 years of professional experience, including experience at Analog Devices and Intel.

I offer online tutoring in Mathematics, Physics, and Electronics, with a focus on building strong fundamentals, understanding concepts clearly, and solving problems step by step.

**What I can teach:**
- Mathematics and Physics for high-school students, including Classes 11 and 12
- Basic electrical and electronic engineering
- Analog and digital electronics
- Fundamentals of ADCs, signal processing, and related engineering topics
- Exam preparation, numerical problem-solving, and concept revision

My teaching approach focuses on understanding the underlying principles rather than memorising formulas. I use practical examples and real-world engineering applications to make difficult topics easier to understand.

I also create educational videos on electronics and engineering concepts through my YouTube channel, Semi Tech.
https://youtu.be/bu0mKGemLBI?si=ajxcMoMiFB2wuMX4

Lessons are available online in English and can be tailored to each student's level, goals, and learning pace. Beginners are welcome!

Abderrahim

4.85

(13)

As an engineering student at ESIEA with a degree in electronics, I help you understand math step by step: algebra, analysis, trigonometry, and equations. I explain things simply with diagrams and concrete examples, starting from your level. We work through progressive exercises, which we then solve together.

Isar

4.85

(13)

Assalamu Alaikum! I offer personalized one-on-one online Quran classes for children, adults and complete beginners, in a calm, patient and encouraging environment.

What you can learn:
Noorani Qaida (Arabic letters, correct sounds and basic rules for beginners)
Quran reading (Nazra) with proper pronunciation
Tajweed rules, explained step by step with live practice
Short surahs and daily duas for children
Revision and fluency building for students who can already read

How my classes work:
Live one-on-one lessons, so every student gets full attention
A short trial lesson to check your current level and set clear goals
Each lesson includes recitation practice, correction of mistakes and revision of the previous lesson
Regular feedback on progress, and extra practice at home
Lessons in English or Urdu, depending on what is easiest for you
Flexible timings for students in different countries

Whether you are starting from the alphabet or want to improve your recitation, I will guide you at your own pace so that you read the Quran with confidence and respect.