Solar PV power plant and its main components functioning

From 116.6 C$ /h

Solar PV technology, different aspects that can be covered:
- electrical systems calculation.
- control system design.
- monitoring, diagnosis and maintenance.

Providing a complete understanding about how a solar PV power plant as well as its components work.

Extra information

Please bring your own laptop

Location

Online from Spain

About Me

I'm a easy going teacher, I really like curious and hard worker students.
I like to spend as much time as necessary to provide the most complete explanation to help the student better understand.

These classes can be a perfect complement for an engineer willing to increase his/her renewable engineering formation and skills.

Education

DTU Wind Energy master by Danish Tecnical University - DTU (Denmark). Two years course.
Industrial Engineering master by Universitat Jaume I - UJI (Spain). Five years course.

Experience / Qualifications

13 years experience as renewable project engineer and many years as engineering department supervisor. RE Energy consultant expert

Age

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Spanish

Catalan

Skills

Engineering

Electrical engineering

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Wind turbines technology and its main components functioning

116.6 C$ /h

Wind turbine technology,
different aspects that can be covered:
- electrical systems calculation.
- loads calculation.
- structural dynamics calculation.
- control system design.

Providing a complete understanding about how a wind turbine system as well as its components work.

Hybrid Power Plants: Wind and Solar PV with Energy Storaging

189.88 C$ /h

Development of an algorithm methodology to minimize the hybrid
power produced forecast error so it’s important to keep in mind that I’m not presenting an optimization model in this work. I’ll show the dependency of the battery size used for this purpose so using the forecast error we will reduce its variability. We will see what positive
effects adding a battery within a hybrid wind and solar power plant has, its sensitivity effect, having as main advantages these:
• reduction of the curtailment produced, bigger battery size less curtailment.
• repair of the forecast error

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Matías

4.85

(13)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Jeremy

4.85

(13)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have experience teaching Physics and Maths to kids from unprivileged backgrounds at the homework school in Saint-Gilles (CASG du Service Social Juif asbl) as well as 5 years of private teaching.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Youssef

4.85

(13)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Samaa

4.85

(13)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

Ayoub

4.85

(13)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Roland

4.85

(13)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. With it being highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A massive part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduated Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of valuable experience and knowledge of the program to help you out with the right preparation to get in. Moreover, after successfully helping more than 10 students secure a spot over the last three years, I have decided to prepare an additional custom lesson plan for each student, based on the admission syllabus, to ensure an even higher chance of admission.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will be polished. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, Delft, what to expect from the study and whether it is the right fit for you.

Baia

4.85

(13)

If you want to lear the profession, which can't be replaced by AI, here I am to help you with that. If you want to master(or learn) electrical engineering with the essential skills needed to effectively utilize Revit and AutoCAD in the design and documentation of electrical systems within building projects, book first lesson with me. Through a combination of theoretical knowledge and practical hands-on exercises, students will learn how to leverage the powerful features of both software tools to create detailed electrical designs, generate accurate drawings, and collaborate seamlessly with other stakeholders in the construction process.

Key topics covered include:

- Fundamentals of electrical engineering principles and standards.
- Introduction to Building Information Modeling (BIM) concepts and workflows.
- Utilizing Revit for electrical system design, including lighting, power distribution, and circuiting.
- Integrating AutoCAD for detailed drafting, annotation, and documentation of electrical plans.
- Performing electrical load analysis and simulation to ensure system efficiency and compliance.
- Best practices for organizing, managing, and sharing electrical project data effectively.

Whether you are a beginner electrical engineer looking to enhance your skills or a newcomer to Revit and AutoCAD seeking to specialize in electrical design, working with me will provide a solid foundation to excel in the field of building services engineering.

For more information, please do not hesitate to text me.

Emmanuel

4.85

(13)

Dive into the dynamic world of engineering and science with this comprehensive course designed for aspiring engineers and scientists. This course is structured to provide you with a robust foundation in key principles and practices that are essential in these fields.

You'll explore fundamental concepts in physics, chemistry, and mathematics, and learn how to apply these principles to solve real-world problems. The course covers critical topics such as mechanics, thermodynamics, materials science, and electrical circuits.

In addition to theoretical knowledge, you'll engage in hands-on projects and experiments that illustrate practical applications. You'll develop skills in data analysis, experimental design, and technical communication, preparing you for advanced study or a career in engineering and science.

Join us to unlock the potential of engineering and science, and start your journey towards innovation and discovery.

Marcos

4.85

(13)

80% of my students got accepted in the 2025 exam, I am sure I can help you out in the 2026 exam!

TU Delft is Europe's most prestigious university for aerospace studies, preparing some of the best engineers. However the selection procedure is tough and demanding, and only those prepared have a chance to succeed.

As a TU Delft student, I know from first hand how stressfull this process is, and can therefore help you succeed in the preparation of these exams. I have previous experience as a tutor back in high school, helping students improve their grades from Cs to As.

Moreover, I have an extensive knowledge on the subjects tested on these exams, having taken them myself, completed the courses at university with excellent grades and teaching over 10 students for the entrance exam.

Throughout the class, I will use a presentation to explain the main concepts of each exam (Maths, Physics and Aerospace Engineering), focusing on those subjects the student is struggling with most. After this, I will help the student complete some practice excercises, and then assign extra practice to complete on their own time. These exercises will then be reviewed in the following class to ensure the topics have been understood.

I am looking forward to help you in your journey as an aerospace engineer!

Fatima

4.85

(13)

🚀 Do you finally want to understand electricity, electronics, or automation without stress? You've come to the right place!

👩‍🏫 I'm an electrical and renewable energy engineer and an experienced teacher. I'll guide you step by step, even if you're starting from scratch.

💡 My courses allow you to:
Understanding the basics of electricity

Master electronic circuits, control systems, and automatons

Learn at your own pace with concrete examples, diagrams, simulations and guided exercises

🧰 Content suitable for:
High school students / students in BTS, DUT, license, preparatory classes, engineering schools......

Students in retraining or self-taught

International students (courses available in French or English)

✅ What sets me apart:
Clear, progressive and caring approach

Support after the course if needed (questions, corrections, etc.)

Online or face-to-face courses

Sahbi

4.85

(13)

Learn electronics in a simple and practical way, adapted to your school level and needs. These courses are designed for all ages, from primary school to high school, and are available in French and Arabic.

You will learn :

The basics of electronics and electrical circuits
The operation of electronic components (resistors, LEDs, capacitors, etc.)
Simple setups and practical projects
Applying the concepts to the school curriculum

Each lesson is personalized according to the student's age and level, with interactive exercises and clear explanations to facilitate understanding.

Individual or small group online courses
Educational materials in PDF format and explanatory videos
Practical exercises adapted to the school curriculum
Personalized tracking to measure progress

Hassan

4.85

(13)

I am ready to teach anyone who has a problem in math or physics. As well as supervising the research and graduation project for the senior students in biomedical engineering, electronic engineering, and nuclear engineering.
Willing to contribute research and co-author and edit for scientific paper

Boaz

4.85

(13)

Maths for Everyone is a class designed for people who want to understand maths clearly and without fear. It is open to learners of all backgrounds, whether you struggled with maths before or simply want a stronger foundation.

The class focuses on real understanding rather than memorising formulas. Concepts are explained step by step using simple language, clear examples, and practical intuition. Students are encouraged to ask questions, make mistakes, and build confidence at their own pace.

Lessons are adapted to the level of the learners and may cover core arithmetic, algebra, functions, graphs, probability, basic statistics, and problem solving skills. The goal is not speed, but clarity and confidence.

No prior knowledge is required. The aim of this class is to make maths understandable, useful, and accessible to everyone.

Ali

4.85

(13)

Physics and materials science can be challenging without the right explanations. I offer structured, clear, and personalized tutoring to help students truly understand concepts rather than memorize formulas.

I hold a PhD in Materials Science & Nanotechnology and have several years of experience teaching and mentoring university students in physics, materials science, and semiconductor-related topics.

My classes are adapted to the student’s level and goals, whether you are:
- Preparing for university exams
- Studying engineering or physics
- Struggling with core concepts and problem-solving
- Looking to deepen your understanding for research or advanced studies

Topics can include (but are not limited to):
- General Physics (mechanics, electromagnetism, thermodynamics)
- Solid-State Physics & Semiconductor Physics
- Materials Science fundamentals
- Nanotechnology & MEMS basics
- Exam preparation and problem-solving strategies

I focus on clear explanations, step-by-step problem solving, and building confidence. Lessons are interactive and always tailored to your needs.