Electrical Drives, Electrical Machines, Electrical Circuits

From 61 C$ /h

I did Master's in Electrical Engineering with specialization in Power Systems. I have six years of teaching experience. Courses that I can teach are Power Generation, Power Transmission & Distribution, Power Electronics, Electrical Drives, Electrical Machines, Renewable Power Generation, Engineering Mathematics, Signals & Systems, Matlab and Simulink Programing. My Research interests are Power Electronics, Power Optimization and renewable energies.

Location

Online from Pakistan

About Me

I did Master's in Electrical Engineering with specialization in Power Systems. I have four years of teaching experience. Courses that I can teach are Power Generation, Power Transmission & Distribution, Power Electronics, Electrical Drives, Electrical Machines, Renewable Power Generation, Engineering Mathematics, Engineering Economics, Signals & Systems, Matlab and Simulink Programing. My Research interests are Power Electronics, Power Optimization and renewable energies.

Education

Bachelor's in Electrical Engineering and Masters in Electrical Engineering with Specialization in Power Systems. My Research interests are Power Electronics, Power Optimization and renewable energies.

Experience / Qualifications

I did Master's in Electrical Engineering with specialization in Power Systems. I have Seven Years of Tutoring experience and Four Years of experience in teaching the electrical engineering courses in the practical department in the academic field and Supervising projects for electrical engineering students.

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Urdu

Pashto

Skills

Electrical engineering

Electrical circuits

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Electrical Engineering, Power Electronics and Renewable Energy

45 C$ /h

I did Master's in Electrical Engineering with specialization in Power Systems. I have four years of teaching experience. Courses that I can teach are Power Generation, Power Transmission & Distribution, Power Electronics, Electrical Drives, Electrical Machines, Renewable Power Generation, Engineering Mathematics, Signals & Systems, Matlab and Simulink Programing. My Research interests are Power Electronics, Power Optimization and renewable energies.

Mathematics Tutoring and Entry Test Preparation for High School Students

26 C$ /h

Youssef

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Nassim

4.85

(13)

Detailed explanation of basic electronics courses starting from basic elements to the most complicated structures, solid course with detailed explanation

All electronic components

Basic logic circuits
integrated circuits

Adam

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

عبدالرحمن

4.85

(13)

He holds an honors degree in electrical engineering, electronics and communications. More than 15 years of experience. I teach engineering students and technicians. I also teach mathematics in all its branches, algebra and engineering for Arabic education and languages for all educational levels.
I have trained students in universities and graduated engineers practically and theoretically, and I have achieved various successes, thanks to God, with the students and raising their level. The lesson or lecture can be given face to face or online.
Depending on the conditions available to students

Ansh

4.85

(13)

This class is specially design and recommended by students to capture a lot of electronics topic in one go and clear the exams with good score with in limited time.
while teaching students , they asked me to start something which they can use a quick guide to save their time in exams and clear easily

Ahmed

4.85

(13)

Learn from the ground up, starting with the fundamentals of electronics and various electronic components.
Understand the necessary electrical connections to design and program smart home and Internet of Things (IoT) circuits.
Explore what Arduino is and the programming language used to control it.
Discover how to create programs to control home devices using a mobile phone.

Training includes working with real Arduino circuits as well as using simulation software.
I offer practical and simplified training that starts from the fundamentals of electronics and progresses to designing and programming smart home and Internet of Things (IoT) systems. The course includes clear theoretical explanations and hands-on applications using real circuits and digital simulation software.

Course Content

Electronics Fundamentals

Introduction to essential electronic components: resistors, capacitors, diodes, transistors, and sensors

Understanding proper electrical connections

Reading electronic circuits and using the breadboard

What is Arduino and How Do We Program It?

Introduction to Arduino boards

Explanation of the C/C++ programming language used for Arduino

How to upload code and test projects step by step

Designing and Programming Smart Home Circuits

Connecting sensors and smart switches

Controlling lighting and household devices

Designing a system to control the home using a mobile phone

Introduction to IoT and integrating it with home automation

Mobile Phone Home Control

Creating simple control interfaces

Connecting using Wi-Fi or Bluetooth

Turning devices on and off and monitoring sensors remotely

Practical Training

Working with real Arduino circuits

Using simulation software such as Tinkercad and Proteus

Building ready-to-use practical projects

Who Is This Course For?

Beginners in electronics

Students interested in learning Arduino programming

Anyone who wants to build a smart home project

Anyone looking to understand how electronics work in a simple and practical way

Lionel

4.85

(13)

- Understand the concepts of direct and alternating electricity
- Master mathematical concepts through different calculations, symbols and units
- Understand the concepts of wiring switches and residential installations

Ali

4.85

(13)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

Thelma

4.85

(13)

Struggling with Physics? Let's work towards better grades together!
Hi, I'm Thelma, and I offer supportive online mathematics lessons for students studying GCSE, IGCSE, AS and A-Level Physics.
Whether you're struggling with the basics, finding algebra confusing or preparing for an important examination, my lessons are designed around your learning needs and goals.

• We will focus on;

📘 GCSE & IGCSE Physics
We can work on:
•
•
•
•
•
•

📗 AS & A-Level Physics
Topics include:
•
•
•
•
•
•

🎯 Exam Preparation
We will practice exam-style questions, review challenging topics, identify areas for improvement and work through solutions step by step. Where appropriate, we will use past papers from your examination board, including Pearson Edexcel, AQA and OCR.

💻 What to expect in my lessons
• Clear, step-by-step explanations
• Interactive online teaching and worked examples
• Practice questions suited to your level
• Lessons tailored to your goals
• Support with revision and homework questions

Whether you need help understanding a topic or want structured exam preparation, we can focus on the areas where you need the most support.
Ready to improve your understanding of Physics? Book a lesson, tell me your exam board and the topics you find difficult, and let's get started!

Dhanush

4.85

(13)

Electrical engineering is a current trend and upcoming future necessity for people day to day life. so I will teach about how our electrical engineering help our day to day life and it remain use full and safe to our environment and people . People of this world must know about safety measures of electrical system. Also I will teach how to protect our environment and nature by using electrical engineering concept. The above content what I mentioned is learned by future students and taught by me.

يحيى

4.85

(13)

Lesson title:
General Physics for University Students (Physics 101 & 102) - The Complete Guide to Mastering Concepts, Solving Complex Problems, and Guaranteeing A+ Exams

Detailed lesson description:
Do you feel that the general physics course is an obstacle to your academic achievement? Do you find it difficult to connect theoretical laws and apply them to complex exam problems in English? Do you suffer from time constraints during exams or difficulty in extracting data correctly?

Don't worry! This comprehensive and intensive course is specifically designed to be your first and complete reference for passing the General Physics I & II courses with the highest distinction (A+), and turning physics from a source of anxiety into a strength in your GPA.

---

First: Topics covered in the General Physics 1 course (Physics 101 - Mechanics and Heat):

1. Vectors and Physical Quantities:
Understanding scalar and vector quantities and their applications.
- Adding and subtracting vectors structurally and computationally (Vector Addition & Components).
- Standard multiplication and cross product (Dot Product & Cross Product) and their direct uses.

2. Movement in one dimension and two dimensions (Kinematics in 1D & 2D):
- Equations of motion with constant acceleration.
- Free Fall & Projectile Motion.
Uniform Circular Motion and Determination of Acquired Acceleration Directions.

3. Newton's Laws of Motion and their applications:
- Newton's first, second and third laws and the formulation of the free-body diagram.
- Applying forces to different axes and dismantling the vehicles.
- Dealing with static and kinetic friction forces, inclined surfaces, and suspended masses.

4. Work, Energy & Conservation of Energy:
- Calculating the work done by constant and variable forces.
- Kinetic and Potential Energy.
- The principle of conservation of mechanical energy and its applications in the presence and absence of friction.

5. Linear Momentum & Collisions:
- Definition of momentum and calculation of impulse (Momentum & Impulse).
- Elastic and inelastic collisions in one dimension and two dimensions (Elastic & Inelastic Collisions).
- Calculating the center of mass for systems and particle systems.

6. Rotational Motion and Torque:
- Speed, angular acceleration, and the relationship between them and linear quantities.
- Bending moment, shear moment, and inertia moment.
- Applying Newton’s second law to rotational motion and the conservation of angular momentum.

---

Second: Topics covered in the General Physics 2 course (Physics 102 - Electricity and Magnetism):

1. Electric Charge and Coulomb's Law:
- Properties of electric charges and the laws of attraction and repulsion.
- Calculating the net electric force resulting from a group of point charges (Superposition Principle).

2. Electric Field and Gauss's Law:
- Calculating the electric field strength for point charges and continuous charge distributions.
- Electric flux and applications of Digges' law to spherical, cylindrical and planar surfaces.

3. Electrical Potential and Potential Energy:
- The difference in electrical potential and the work done to move the charges.
- Calculating the electrical potential resulting from the different distributions of conductive and insulating surfaces.

4. Capacitors and Dielectrics:
- Capacitor capacity and methods of connecting capacitors in series and parallel (Series & Parallel Capacitors).
- Energy stored in the electric field and the effect of introducing dielectric materials on capacitance and voltage.

5. Electric current and electrical circuits (Current, Resistance & DC Circuits):
- Ohm's Law and the difference between resistance and resistivity.
- Analyzing complex electrical circuits using Kirchhoff's Voltage & Current Laws.
- Capacitor charging and discharging circuits (RC Circuits).

6. Magnetic Field and Magnetic Forces:
- The magnetic force acting on moving charges and wires through which a current flows (Lorentz Force).
- The movement of charges in uniform magnetic fields.
- Biot-Savart Law and Ampere's Law for calculating magnetic fields.

---

Advantages of the teaching method and services provided in this course:

* Simplifying and deconstructing concepts: Transforming complex laws and dry theories into simplified ideas explained in Arabic while maintaining complete directness and professionalism in dealing with English terminology.
* Exam-style training: Solving hundreds of problems and concepts ranging from beginner to advanced levels and levels for outstanding students.
* Solving Past Papers: A comprehensive review of past years’ questions from various universities and coverage of midterm and final exam concepts.
Overcoming the obstacle of multiple choice (MCQs): Introducing critical thinking strategies, quick problem-solving, and techniques for eliminating incorrect answers to deal with time pressure in electronic and paper tests.
* Support and follow-up: Answering student inquiries, explaining school and university assignments (Assignments & Homeworks), clarifying weaknesses and addressing them immediately.

Who is this course for?
This course is aimed at all first and second year students in engineering colleges (mechanical, electrical, civil, aviation, computer), science college students (physics, mathematics, chemistry), technological and technical college students, and every student who seeks to break the barrier of fear of physics and reach the top by obtaining the highest grade.

Keywords (Tags):
Physics 101, Physics 102, General Physics, University Physics, Physics 101, Physics 102, Mechanics, Electricity and Magnetism, Engineering, University, Physics Exams, Physics Problem Solving, Past Papers, Calculus-based Physics, Coulomb, Newton, Kirchhoff, Diving, Piots Savar, EmSAT, Physics Tests, University Physics Explanation, Physics Questions and Answers, Physics Homework, General Physics I, General Physics II

Mayank

4.85

(13)

In this 30-minute class, we will understand the two core components of a microprocessor: the ALU (Arithmetic Logic Unit) and the Control Unit. I will explain their structure, functions, and how they work together to execute instructions, using simple diagrams and practical examples. The goal is to build a clear understanding of how a microprocessor processes and controls data.

Hend

4.85

(13)

In this lesson we cover the basics of statics, the science that studies stationary objects under the influence of different forces, and is the cornerstone of engineering subjects such as mechanics and construction.
What you will learn in this lesson:
• The concept of power, its types, and methods of representing it
• Analyzing forces into their components
Conditions for equilibrium of bodies
• Solve practical examples step by step
The lesson is suitable for engineering students of all specializations, and for anyone who wishes to build a strong understanding of the material before moving on to advanced subjects.

Isar

4.85

(13)

Assalamu Alaikum! I offer personalized one-on-one online Quran classes for children, adults and complete beginners, in a calm, patient and encouraging environment.

What you can learn:
Noorani Qaida (Arabic letters, correct sounds and basic rules for beginners)
Quran reading (Nazra) with proper pronunciation
Tajweed rules, explained step by step with live practice
Short surahs and daily duas for children
Revision and fluency building for students who can already read

How my classes work:
Live one-on-one lessons, so every student gets full attention
A short trial lesson to check your current level and set clear goals
Each lesson includes recitation practice, correction of mistakes and revision of the previous lesson
Regular feedback on progress, and extra practice at home
Lessons in English or Urdu, depending on what is easiest for you
Flexible timings for students in different countries

Whether you are starting from the alphabet or want to improve your recitation, I will guide you at your own pace so that you read the Quran with confidence and respect.