Electronics engineering for graduate students tutoring

From 38 C$ /h

Iam a Doctorate and specialize in tutoring engineering students. My goal is to keep students challenged, but not overwhelmed. I assign homework after every lesson and provide periodic progress reports. I assure better learning and understanding of concepts.

Location

Online from India

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Skills

Computer engineering

Electrical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Youssef

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Anh

4.85

(13)

In these tailored Engineering sessions, I combine tutoring with mentoring to guide your technical understanding and foster your growth in key engineering concepts. My approach adapts to your natural learning style, ensuring that each lesson is intuitive, engaging, and effective.

With over 10 years of experience in Aerospace, Mechanical, and Electrical engineering, I bring a wealth of both academic and real-world expertise to our sessions. I’ll share insights from the Aerospace, Maritime, and Aviation industries to help you develop practical skills and problem-solving techniques, tailored to your needs.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

Or need help with areas like control systems or data analysis, I’m here to guide you through any engineering challenge. My lessons are customized to fit your learning style and academic goals, ensuring you leave each session feeling confident and prepared.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Adam

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Ali

4.85

(13)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

Abdelmalek

4.85

(13)

- Modbus Protocol Introduction
- Modbus Frame Structure & Byte Analysis
- Modbus Exception Handling & Error Codes

Each module in this series is structured with core learning content followed by two mandatory practical components:
Challenge: A hands-on troubleshooting or design scenario to test your practical skills.
Audit: A checklist and verification quiz to ensure full mastery before moving to the next section.

Henoc

4.85

(13)

Electricity Teacher - Live Lessons from a Real Classroom

TIRED OF CLASSES IN FRONT OF A BLANK SHEET OF PAPER?

I give my lessons LIVE from a classroom with a blackboard and chalk.
Like at school, but with Google Meet at home.

FOR WHO ?
MIDDLE SCHOOL / HIGH SCHOOL: Circuits, laws, safety, reading diagrams
Vocational Baccalaureate: Power diagram, control diagram, wiring, installation
BTS: Industrial diagrams, motor starting, relays and contactors

MY METHOD:
We're working on YOUR exercises. I'll explain them to you step by step on the board.
Clear and concrete explanations with examples from construction sites.
You see everything I write and you leave with photos from the course.

HOW DOES IT WORK?
100% online course via Google Meet.
Professional quality: Sound + Image + Visible painting.
Opening hours: Evenings and weekends, French time.

Levels: Beginner to Advanced. First lesson to try it out.

Dhanush

4.85

(13)

Electrical engineering is a current trend and upcoming future necessity for people day to day life. so I will teach about how our electrical engineering help our day to day life and it remain use full and safe to our environment and people . People of this world must know about safety measures of electrical system. Also I will teach how to protect our environment and nature by using electrical engineering concept. The above content what I mentioned is learned by future students and taught by me.

Pallavi

4.85

(13)

Learn Python with a structured, hands-on approach! Whether you are a absolute beginner looking to start coding, a student needing help with coursework, or a professional aiming to automate tasks, these lessons are tailored for you.What we will cover:
Core Fundamentals: Variables, loops, functions, and data structures.Object-Oriented Programming: Building reusable and clean code.Real-World Projects: Creating scripts, data analysis, or web scraping based on your goals.

Problem Solving: Learning how to debug and think like a programmer. Lessons are highly interactive. We will write code together from day one, and you will receive practical exercises after every session to build your confidence.

Zeyad

4.85

(13)

This course is for students just starting out in CS.

We'll cover programming (Python), some algorithms, data representation, basic computer architecture, networks, and databases built step by step so the fundamentals actually stick before exams or university coursework get harder.

Lessons are hands-on: meaning we'll solve problems together and focus on the areas students usually get stuck on, like tracing algorithms or writing your first working programs.

We'll prepare thoroughly for final examinations so you can see the best results.

Test

4.85

(13)

You will learn how to develop websites with and without AI, as well as skills related to the software development sector such as programming, databases, different development methodologies, and writing technical specifications.

Mayank

4.85

(13)

In this 30-minute class, we will understand the two core components of a microprocessor: the ALU (Arithmetic Logic Unit) and the Control Unit. I will explain their structure, functions, and how they work together to execute instructions, using simple diagrams and practical examples. The goal is to build a clear understanding of how a microprocessor processes and controls data.

4.85

(13)

Learn PowerShell through practical, one-on-one training focused on real-world Windows administration.

This course is designed for IT professionals, system administrators, IT support technicians, and career changers who want to develop practical PowerShell skills for managing Windows Server, Active Directory, and Microsoft Exchange environments.

Topics Covered
PowerShell fundamentals and command structure

Working with PowerShell commands, cmdlets, parameters, and objects

Variables, operators, conditions, and loops

Working with files, folders, and Windows processes

Managing Windows Server with PowerShell

Creating and managing Active Directory users, groups, and computers

Active Directory administration and automation

Bulk user and account management

Searching and filtering Active Directory objects

PowerShell for Microsoft Exchange Online

PowerShell for on-premises Exchange Server

Managing Microsoft 365 and Exchange objects with PowerShell

Writing reusable PowerShell scripts

Error handling and troubleshooting

Automating repetitive administrative tasks

Practical scripting exercises based on real IT administration scenarios

Who Is This Training For?
This training is suitable for:

IT Support and Help Desk professionals

Desktop Support technicians

Windows Administrators

System Administrators

Microsoft 365 Administrators

Network/IT professionals

Students preparing for an IT career

Career changers entering the IT field

Anyone who wants to automate Windows administration tasks

No advanced programming background is required. We can start with the fundamentals and progress toward practical administration and automation.

Lessons are one-on-one and customized to your current knowledge and career goals, with an emphasis on hands-on exercises rather than theory alone.

If your goal is to learn PowerShell for Windows Server, Active Directory, Microsoft 365, or Exchange administration, this training can be tailored specifically to your needs.

Hend

4.85

(13)

In this lesson we cover the basics of statics, the science that studies stationary objects under the influence of different forces, and is the cornerstone of engineering subjects such as mechanics and construction.
What you will learn in this lesson:
• The concept of power, its types, and methods of representing it
• Analyzing forces into their components
Conditions for equilibrium of bodies
• Solve practical examples step by step
The lesson is suitable for engineering students of all specializations, and for anyone who wishes to build a strong understanding of the material before moving on to advanced subjects.

Mohamed

4.85

(13)

Teaching electrical engineering online to university students

I offer online private lessons for engineering college students, focusing on simplifying engineering concepts, solving problems step by step, and practicing exam and project questions.

I help students understand the material from the ground up instead of relying on memorization, using practical examples, illustrations and simulations when needed.

The subjects I teach include:

Electrical Circuits
Electrical Machines
- Electrical Power Systems
Power System Protection
Electrical Installation & Distribution
Energy Conversion
Renewable Energy Systems
High Voltage and High Voltage Engineering
- Transformer stations and substations
- Electronics and basic electronic circuits
- Basic Control Systems
Engineering mathematics used in electrical engineering

During the lecture, I focus on:

1. Explain the concept in a simple and organized way.
2. Derivation of important laws and equations.
3. Solve various examples and problems step by step.
4. Training the student on exam questions.
5. Explaining common mistakes and how to avoid them.
6. Use MATLAB/Simulink, ETAP and simulation when needed.
7. A comprehensive review before tests and exams.

Teaching method:

- Individual lectures or small online groups.
- Live and interactive explanation via Zoom or Google Meet.
- Sharing the screen and writing on the electronic whiteboard.
- The possibility of recording the lecture as agreed.
- Providing summaries and practice problems for review.

The goal: for the student to be able to understand the material, solve problems on their own, and prepare confidently for exams and engineering projects.