Solidworks - Basic and Professional Courses - Advanced Special Modules - Dublin

Translated by GoogleSee original

Solidworks - Basic and Professional Courses - Advanced Special Modules

From 35 C$ /h

Solidworks Online courses via ZOOM. Standard courses and advanced special modules.

Tailor-made course for my students according to their field of action. You will learn to use essential and advanced tools to design infinities of objects.
In these courses you will not only learn to use Solidworks tools, but also to design with a realistic point of view, that is, understanding the manufacturing processes. I will teach you many methods and strategies to create great projects which I have learned through my 10 years of experience as a designer and manufacturer of products.

Available courses:
1) SOLIDWORKS STANDARD
• Basic 3D part modeling
• Assembly Generation
• Generation of 2D Plans

2) ADVANCED SPECIAL MODULES
• Welded structures
• Sheet metal parts
• Modeling of complex surfaces
• Simulations
• Realistic photo render
• Rapid Prototypes

Extra information

Requirements: good internet connection. You do not need prior knowledge for the standard Solidworks course. If you don't have a Solidworks version installed, I'll help you get the free student version.

Location

Online from Spain

About Me

Ingeniero de diseño mecánico especializado en el diseño y la fabricación de nuevos productos

Soy una persona con iniciativa, positiva, siempre dispuesto a la innovación y el aprendizaje. Apasionado por el diseño de nuevos productos, la ingeniería mecánica y el diseño industrial. Me encanta transmitir a mis alumnos los conocimientos tanto de diseño como también los procesos y métodos de fabricación que he adquirido a través de toda mi carrera profesional. Mi objetivo es capacitar a mis estudiantes hacia un nivel profesional en el área de diseño y desarrollo de productos.

Tengo 10 años experiencia trabajando en proyectos como el diseño de componentes de fibra de vidrio y carbono, piezas de plástico y metálicas, moldes y utillaje, coches eléctricos y de competición, motores aeronáutico, remolques, estructuras metálicas y dispositivos para el ensamblaje de componentes.

Education

Ingeniero Mecánico egresado en la Universidad Católica de Córdoba, Argentina.
Capacitaciones oficiales de Dassault Systèmes en SOLIDWORKS nivel Profesional.
Capacitación en simulación estructural utilizando método por elemento finito. Plataforma de cálculo de Solidworks, Catia y Mecway.

Experience / Qualifications

PROFESOR DE SOLIDWORKS (2015 -2021)
Tengo 6 años de experiencia enseñando SOLIDWORKS. He capacitado a jóvenes y adultos, ingenieros y diseñadores industriales para trabajar en grandes proyectos de forma eficiente, rápida y profesional.

INGENIERO DISEÑADOR en VOLT MOTORS (2017-2020)
Diseño de coches eléctricos. Miembro del equipo de diseño.
-Diseño de componentes para el coche.
-Gestor en la fabricación de componentes con proveedores externos y personal interno.
-Gestor de prototipos. Coordinación e indicaciones técnicas para la fabricación de componentes y sistemas mecánicos.

INGENIERO DE DISEÑO en ORESTE BERTA (2010-2017)
-Miembro del equipo de diseño de productos.
-Proyectos destacados: Motor aeronáutico, piezas para vehículos de competición, diseño de autos de competición.
-Encargado en la fabricación de componentes, producción en serie y de prototipos (2015-2017).

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

90 minutes

120 minutes

The class is taught in

English

Spanish

Skills

Cad software

Mechanical engineering

Drawing & sketching

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Jaume

4.81

(26)

I am a visual artist born in Barcelona, settled in Belgium since 2017. As an artist I have accumulated experience for the last 25 years. I am graduated with an Academic Bachelor in Fine Arts in the University of Barcelona and graduated as a Master in Visual Arts at Sint Lucas School of Arts in Antwerpen.

I am specialised in painting, drawing, experimental films, installations, language, sound and curating. In other words, I am a multidisciplinary artist.

I understand the artistic practice as a way to understand ourselves and the situations which surrounds us. In my classes I don't teach how to do Art, but as how to say something through your artistic work. With me you can work independently, with a coach who will challenge you with some assignments and giving feedback to your personal concerns.

In addition, you will learn how to work with several mediums, preparing your own material: paintings, canvases, and so on.

You will not only receive individual coaching but as encourage you to look other artists or take into account other references connected with your concerns.

Finding, discussing and retaking solutions together are the core of my classes.

Matías

4.81

(26)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Xingying

4.81

(26)

Painting and drawing are not just techniques—they are also powerful tools for presentation, mediation, and self-expression. This class will guide you through the essentials of painting and drawing, covering foundational skills such as perspective, anatomy, and color theory, as well as techniques for analyzing and critiquing artwork.

From still life and portraiture to landscapes, abstract painting, and multimedia art, this course will support you in developing your unique visual language. Based on your individual goals and interests, I will create a tailored plan to help you achieve the best possible outcomes in your artistic journey.

Reza

4.81

(26)

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB.

Some of the finite element modeling and numerical simulations I have worked on include:
- Multiscale finite element modeling for fatigue crack propagation in porous materials.
- Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper].
- Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles.
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials.
- Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions.

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Adam

4.81

(26)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Leia

4.81

(26)

Do you want to learn to draw on a tablet or perfect your digital style?
I'll guide you step by step to master the tools of digital drawing, from sketch to final illustration!

On the program according to your level:
*Introduction to drawing on a tablet (Procreate, Photoshop, Clip Studio Paint, etc.)
*Understanding layers, brushes, and digital colors
*Build a character, a scene, or a complete setting
*Lighting, texture, and shading techniques
*Create your own illustration style
*(Optional) Portfolio or preparation for art school

Yomna

4.81

(26)

This course explains how air interacts with bodies, from airfoils to aircraft.

Topics Covered:

Aerodynamic forces and moments
Airfoil theory and lift generation
Drag and pressure distribution
Subsonic and compressible aerodynamics
Boundary layers and flow separation

Applications:

Aircraft and drones
Automotive aerodynamics
Wind and performance analysis

Muhammad

4.81

(26)

As a teaching assistant in the College of Engineering (specializing in Mechatronics Systems Engineering), I provide specialized academic support to engineering students to help them understand complex material, pass exams with distinction, and complete academic projects professionally.
I offer explanations and assistance in the following courses:
• Fluid Mechanics & Hydraulic/Pneumatic Control.
• Rigid Body Dynamics.
• Sensors and Data Acquisition Systems.
• Digital control machines and computer-aided design/manufacturing (CAD/CAM & CNC).
• Electric Machines & Drives.
• Renewable Energies.
In addition to theoretical explanations and worksheet solutions, I offer practical guidance in using engineering software (such as MATLAB and ANSYS) and assistance with graduation projects and course projects (CAD modeling and CFD simulations). My goal is to simplify engineering concepts and connect them to practical applications.

Ammar

4.81

(26)

Engineering and design become much easier when analysis, geometry, technical representation, digital modelling, spatial reasoning, and visual communication are connected within one coherent problem-solving process.

I am a PhD-qualified engineer, university professor, researcher, technical trainer, designer, and multidisciplinary consultant with more than 30 years of experience across engineering, teaching, project work, CAD, technical drawing, 3D modelling, GIS, visualization, information systems, and professional problem solving.

This class provides a personalized pathway for school and university students, engineering and design learners, architects and technicians, researchers, professionals, career changers, and adult learners. Depending on your goals, we can focus deeply on one specialized area or connect several areas within a complete technical workflow.

PHYSICS & APPLIED ENGINEERING SCIENCE
• Mechanics: motion, forces, Newton’s laws, work, energy, momentum, and rotational motion
• Statics, dynamics, equilibrium, torque, and engineering applications
• Fluids, pressure, buoyancy, density, and basic fluid mechanics
• Heat, temperature, thermodynamics, and energy transfer
• Waves, oscillations, sound, optics, electricity, and magnetism according to the learner’s level
• Mathematical modelling of physical systems
• Units, dimensions, vectors, graphs, and interpretation of experimental or engineering data
• Connecting physical principles to engineering design, calculations, and real-world technical problems

CHEMISTRY & ENGINEERING MATERIALS
• Atomic structure, chemical bonding, molecular structure, and periodic trends
• Stoichiometry, chemical reactions, solutions, concentrations, gases, and equilibrium
• Acids, bases, oxidation-reduction, and introductory thermochemistry
• Properties and behaviour of engineering materials
• Metals, polymers, ceramics, composites, and material-selection principles when relevant
• Connecting chemical principles to materials, manufacturing, environmental, and engineering applications

ENGINEERING DESIGN & PROBLEM SOLVING
• Understanding and structuring engineering problems
• Translating requirements into technical objectives
• Identifying constraints, assumptions, variables, and criteria
• Engineering calculations and quantitative reasoning
• Applied mechanics and engineering fundamentals when relevant
• Dimensional reasoning and unit consistency
• Design alternatives and trade-off analysis
• Verification and reasonableness checking
• Engineering decision making
• Design methodology and iterative improvement
• Interpreting technical specifications
• Connecting analysis to drawings, models, and deliverables
• Engineering-management and multidisciplinary project contexts

AUTOCAD & TECHNICAL DRAFTING
• AutoCAD interface and efficient workflows
• Coordinate systems and precise geometric construction
• 2D drafting fundamentals
• Layers, properties, object organization, and standards
• Blocks and reusable drawing content
• Dimensions, annotations, text, and hatching
• Model space and paper space
• Layouts, viewports, scales, and plotting
• Technical drawing principles
• Reading and interpreting engineering drawings
• Plans, sections, elevations, and details
• Drawing organization and documentation quality
• Advanced drafting workflows
• AutoCAD 3D concepts when relevant
• Improving speed, accuracy, and drawing consistency

BIM & REVIT WORKFLOWS
• BIM concepts and model-based thinking
• Revit project organization
• Levels and grids
• Walls, floors, roofs, and building elements
• Doors, windows, components, and families
• Views, sections, elevations, and schedules
• Annotation and documentation workflows
• Sheets and presentation standards
• View templates and graphical consistency
• Family-library organization
• BIM coordination principles
• Connecting models to professional documentation
• Developing structured Revit templates and repeatable workflows

3D MODELLING & PARAMETRIC DESIGN
• 3D geometric thinking
• Curves, surfaces, solids, and meshes
• Constructive and feature-based modelling concepts
• Precision modelling
• Product and engineering geometry
• Architectural and spatial modelling
• Rhino 3D workflows
• Grasshopper and visual parametric thinking
• Parameters, relationships, dependencies, and constraints
• Algorithmic generation of geometry
• Reusable and adaptive design logic
• Design iterations and controlled variation
• SolidWorks and Inventor workflows when relevant
• 3D Studio Max and visualization contexts when relevant
• Connecting models to drawings, analysis, fabrication, or presentation

CAD/CAM & MANUFACTURING WORKFLOWS
• From CAD geometry to manufacturable components
• Design-for-manufacturing principles
• Introduction to CAM concepts and machining strategies
• CNC fundamentals, coordinate systems, tools, operations, and toolpaths when relevant
• SolidWorks CAD/CAM workflows
• Verification, simulation, and interpretation of manufacturing outputs

GIS, MAPPING & SPATIAL ANALYSIS
• Foundations of Geographic Information Systems
• Spatial data models
• Vector and raster concepts
• Coordinate systems and projections
• Georeferencing
• Spatial data collection and organization
• Attribute data and database relationships
• Geodatabases
• Selection and spatial queries
• Buffering, overlay, proximity, and spatial analysis
• Thematic mapping
• Cartographic principles
• Spatial patterns and decision support
• ArcGIS Desktop and ArcGIS Pro workflows when relevant
• Remote-sensing and imagery concepts when relevant
• Integrating maps, analysis, and professional reporting

GRAPHIC DESIGN & VISUAL COMMUNICATION
• Principles of visual communication
• Composition and layout
• Visual hierarchy
• Typography
• Colour and contrast
• Image preparation and editing
• Vector graphics and illustration
• Technical diagrams and infographics
• Maps and spatial presentation
• Engineering and architectural presentation
• Portfolio and project-board development
• Presentation graphics
• Adobe Photoshop workflows
• Adobe Illustrator workflows
• Adobe InDesign workflows
• Connecting technical accuracy with visual clarity

Depending on your objectives, practical work may involve AutoCAD, Revit, BIM workflows, Rhino, Grasshopper, SolidWorks, Inventor, 3ds Max, ArcGIS Desktop, ArcGIS Pro, QGIS, Adobe Photoshop, Illustrator, InDesign, SketchUp, Figma, Canva or other relevant technical and design tools.

My teaching approach follows a structured workflow:
define the problem → understand the requirements → analyze the constraints → develop the geometry or data structure → create the drawing, model, or spatial analysis → verify accuracy → refine the solution → communicate it clearly

I do not simply demonstrate isolated commands. I help you understand why a workflow is appropriate, how information should be structured, how accuracy can be verified, how alternative solutions can be evaluated, and how the final technical idea should be communicated professionally.

We can work with your course syllabus, engineering problem, technical drawing, CAD file, Revit/BIM model, 3D model, parametric definition, GIS dataset, map, design project, portfolio, graphic layout, or professional workflow challenge.

Whether you are learning your first CAD commands, solving an engineering problem, developing a BIM workflow, building a 3D or parametric model, conducting spatial analysis, or improving technical visual communication, I will adapt the sessions to your level, objectives, and pace.

My goal is to help you become an independent technical problem solver who can analyze, design, model, verify, visualize, and communicate solutions with confidence.

Fernanda

4.81

(26)

I am a professional visual artist with more than 30 years of experience exhibiting, researching and developing my practice internationally. I offer individual art lessons and mentoring for students of different ages and levels, from beginners who want to learn how to draw or paint to more experienced artists who want to develop a stronger and more personal body of work.

Lessons are adapted to each student. We can work with observational drawing, painting, composition, materials and technique, but also with ideas, references, art history, sketchbooks and the development of your own visual language.

I also work with students preparing portfolios and applications for art schools, universities, residencies and other professional opportunities, as well as artists who feel stuck and want to rethink or strengthen their creative practice.

My aim is not simply to teach you how to reproduce an image, but to help you understand what you want to make, why you want to make it, and how to develop the skills and references necessary to make it your own.

Classes are available in English or Portuguese and are shaped around your interests, experience and goals.

Philippine

4.81

(26)

I offer drawing lessons to teach you different techniques and tools. It's about understanding how colors combine and blend, and how to create an interesting composition.
I also support you in your artistic projects by giving you advice to help you succeed.
I mainly work with watercolors, colored pencils, black markers, but also pastels or tools that we all have: the ballpoint pen.
I also do a lot of collage and graphic compositions
I am a student passionate about art who loves to share her passion and has been drawing for several years.

Emma

4.81

(26)

Hello,

Still a 5th year student in 2D animation film creation, I offer to teach you how to create your own universe through the creation of your character(s) as well as in the development of environments in which this/these same character(s) could be animated.

These courses are accessible regardless of your drawing level.

Want to bring your ideas to life, create a unique character or imagine a captivating environment? My drawing classes are tailored above all to your desires and objectives.

Whether you are a beginner or already experienced, the course content is fully customizable according to your level and the areas you wish to explore in greater depth.

Do you want to focus primarily on character creation? We can explore their design together and develop your ideas.

Do you prefer to delve deeper into the creation of environments and universes? The course can be geared towards this in order to allow you to work specifically on what interests you.

And if you simply want to discover both aspects, I also offer a discovery course, combining character and environment creation to offer you a complete first approach to creating a universe.

Here, the course adapts to you, not the other way around. Together, we build a learning experience that truly matches your desires and progress.

Arun

4.81

(26)

I provide practical, one-to-one training in Autodesk Inventor and Autodesk Vault, focused on helping students understand the software and apply it effectively to real engineering work.

The training can be adapted to your current level and objective. We can work through Autodesk Inventor concepts step by step, or take a completely hands-on approach where you create your own models while I guide you, identify issues, explain better methods and share practical modelling and engineering best practices.

For Autodesk Inventor, topics can include part modelling, assemblies, drawings, design intent, modelling strategies, constraints, parameters, design changes and general CAD best practices. If you already have experience with Inventor, we can focus on improving your modelling approach, solving specific problems or reviewing your existing work.

For Autodesk Vault, we can focus on understanding document and design data management, file organisation, versioning, revisions, check-in/check-out, working with CAD data and practical workflows for managing engineering files.

The lessons are not based on a fixed syllabus. I adapt each session to what you actually need to learn or solve. You can also bring your own model, exercise, project or specific problem and we can work through it together.

I have more than 14 years of experience working at the intersection of engineering, manufacturing, CAD, PDM and PLM, so the focus is not only on which button to click, but also on understanding why a particular approach is useful in an engineering environment.

The lessons are suitable for students, engineering professionals, designers and anyone who wants to improve their practical Autodesk Inventor or Vault skills.

طارق

4.81

(26)

Eleven years of experience, including both teaching and practical experience in the industry, along with a Bachelor's degree in Mechanical Engineering with a very good grade, have given me a very deep and accurate understanding of mechanical engineering concepts, in addition to extensive experience in the academic field due to my passing a very large number of exams and lessons, as well as teaching the material to my colleagues at the university and teaching it to secondary and university students.

I can confidently convey the concepts and principles of mechanical engineering to you in a way that suits your abilities, and I can address your problems in the following engineering subjects so that you will be able to pass any exam with distinction and excellence:
1- Principles of Mechanics
2- Calculus 1 + 2 + 3
3- Physics 1 + 2
4- Static
5- Dynamics
6- Fluid Mechanics
7- Heat transfer
8- Strength of material
9- Thermodynamics
10 - Mechanical Vibrations

You can contact me for more details before making your decision. You're most welcome.

Derek

4.81

(26)

Patient, practical tuition in Maths, Physics and Engineering Science from a mechanical engineer and further-education lecturer. I support Scottish National, Higher and Advanced Higher courses, GCSE learners throughout England, college and university students, apprentices and adult learners. Lessons are tailored to your level and goals, with calculations explained step by step, regular checks for understanding, revision planning, exam technique and real-world engineering examples. Topics can include algebra, trigonometry, calculus, statistics, mechanics, thermodynamics, fluid mechanics, electrical circuits and applied engineering calculations. I hold a Bachelor’s Degree in Mechanical Engineering, have over 25 years of engineering experience, five years of teaching experience, and a current PVG disclosure. Tuition is available online and in person in Glasgow, Monday to Saturday.