(Statics, Dynamics, Solid Mechanics, Fluid Mech, Heat Transfer, Thermodynamics, Strength of materials) Mechanical Engineering Courses

From 39.31 C$ /h

Lecturer at the Faculty of Engineering.
Experience in teaching since 2004.
I took mechanical engineering courses such as statics, Dynamics, Solid Mechanics, and fluid.
Mech, Heat Transfer, Thermodynamics, Strength of materials).
I contributed and supervised on technical projects.

Location

Online from Egypt

About Me

I am a teacher in faculty of engineering and a member at the university since I graduated in 2004 (about 20 years of experience in the field of teaching) then I obtained a master's degree and then a doctorate. I taught specialized subjects such as (statics - dynamics - engineering drawing and assembly - fluid mechanics - thermodynamics - heat transfer - testing and strength of materials - production engineering for engineering preparatory - mechanical design, first level). In addition to this, I am the mechanical maintenance head for a place of a special nature.

Education

Colleges of Engineering, Technical Colleges, Engineering Institutes, Technical Institutes, Mechanical Engineering Specialization, Mechanical Power Engineering, Production Engineering and Mechanical Design, Engineering Training Sectors.

Experience / Qualifications

I am a lecturer in faculty of engineering and a member at the university since I graduated in 2004 (about 20 years of experience in the field of teaching).
I have a master's degree in the Department of Power Engineering and Mechanical Design.
I have a doctorate in the Department of Mechanical Power and Energy Engineering.
In addition to this, I am the head of the mechanical maintenance department for a special place.
I have taught specialized subjects such as (statics - dynamics - engineering drawing and assembly - production engineering for engineering preparatory - fluid mechanics - thermodynamics - heat transfer - testing and evaluation of materials - mechanical design first level).
I have used drawing, design and programming programs such as AutoCAD, SolidWorks, Fluent and EES.

Age

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

90 minutes

The class is taught in

Arabic

English

Skills

Industrial engineering

Mechanical engineering

Engineering

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Matías

4.88

(84)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Alonso

4.88

(84)

I am a Full Professor of Mechanical Engineering with 30 years of experience in areas such as Strength of Materials, Stability, Physics (Kinematics and Dynamics), Statics, Elasticity, Solid Mechanics, Machine Elements, Stress Analysis, Structures and Advanced Materials Mechanics . I emphasize teaching through problem solving and practical applications.
The Strength of Materials classes include topics such as: Stress analysis. Axial load, bending, Torsion, Transverse load, Combined stresses, Stress transformation, Energy methods, Calculation of deflections in beams, statically indeterminate problems, buckling, shear center, compound bending and asymmetric bending, Castigliano's theorem, Mohr's method , Virtual work, Creep and Fracture Criteria, etc.

Yassine

4.88

(84)

Associate Professor and Doctor of Mechanical Engineering – Recognized academic expertise, combining scientific rigor and pedagogical excellence.

Private tutor for 10 years – A decade of experience in personalized support and student success.

I do not charge for extra time – My commitment is total: the time needed to understand and master the concepts is included.

Passionate and patient teaching – I teach with kindness, adapting to each individual's pace to transmit knowledge and methods in a lasting way.

Project and internship support – Structured guidance to enhance your work and strengthen your academic and professional record.

Sliding scale pricing based on the number of hours – A fair formula that rewards long-term investment.

I offer private online tutoring adapted to all levels of higher education:

🟥 Engineering Cycle • 🟥 Master's Degree • 🟥 Bachelor's Degree • 🟥 Preparatory Classes for the Grandes Écoles
🟥 Integrated preparatory courses • 🟥 DUT • 🟥 BTS • 🟥 Post-bac.
Which aim to:
🟡 Achieve excellent grades with guaranteed results thanks to a proven method.
🟡 Reinforcing fundamental concepts and acquiring practical tips.
🟡 Complete preparation for tutorials, homework, tests, exams and national competitions.
🟡 Specialized support for academic and industrial projects

🟢 Working method: an effective 3-step method
course review and summary
• drafting a complete summary sheet
· focus on important elements, key formulas and tips
• Fast and efficient revision support
progressive training
• Typical exercises and direct application
• problems of in-depth study
· complex synthesis exercises
optimal preparation
• Specific methods for each type of assessment
• Strategies for tests, exams and competitions
• simulations of tests under real-world conditions

I use remote platforms such as:
Zoom, Teams, Google Meet...
I use a graphics tablet as a tool.

Among the courses I teach:
🟢 Solid mechanics;
🟢 The mechanics of the point;
🟢 Strength of materials (SOM);
🟢 Continuum mechanics (CM);
🟢 Elasticity;
🟢 Structural calculations using finite element (FE);
🟢 Reinforced concrete structural calculations;
🟢 The vibration continues;
🟢 Fluid mechanics;
🟢 Hydraulics;
🟢 Thermodynamics;
🟢 Heat transfer;
🟢 Industrial design;
🟢 Aeronautics;
🟢 Machine components;
🟢 The materials;
🟢 Metallurgy;
🟢 Mechanical manufacturing processes;
🟢 Metrology;
🟢 Servomechanisms and regulation.

I offer continuing education courses or industrial projects to be carried out using modeling and numerical simulation software, CAM and CAD:
🟢 Ansys;
🟢 Abaqus;
🟢 Catia;
🟢 SolidWorks

Jeremy

4.88

(84)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have experience teaching Physics and Maths to kids from unprivileged backgrounds at the homework school in Saint-Gilles (CASG du Service Social Juif asbl) as well as 5 years of private teaching.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Anh

4.88

(84)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Youssef

4.88

(84)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Samaa

4.88

(84)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

Nicolas

4.88

(84)

As a current Master's student in Aerospace Engineering at TU Delft, I have successfully navigated the entire Bachelor's curriculum and the competitive selection procedure, so I am fully equipped to guide you through the study plan and specific admission requirements. I offer personalized tutoring sessions designed to ensure comprehensive preparation for the entrance exams. These classes include a detailed review of key concepts in Mathematics and Physics, intensive practice with relevant exercises, and specific strategies to tackle the test effectively. I also place a dedicated focus on mastering the First Year Material (FYM) section (often the most challenging and unfamiliar part for applicants) to help you build the confidence and skills necessary to succeed. Furthermore, I am happy to discuss the degree program itself and explore the opportunities available in Delft to help you prepare for your future student life.

Ayoub

4.88

(84)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Roland

4.88

(84)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. With it being highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A massive part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduated Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of valuable experience and knowledge of the program to help you out with the right preparation to get in. Moreover, after successfully helping more than 10 students secure a spot over the last three years, I have decided to prepare an additional custom lesson plan for each student, based on the admission syllabus, to ensure an even higher chance of admission.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will be polished. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, Delft, what to expect from the study and whether it is the right fit for you.

Emmanuel

4.88

(84)

Dive into the dynamic world of engineering and science with this comprehensive course designed for aspiring engineers and scientists. This course is structured to provide you with a robust foundation in key principles and practices that are essential in these fields.

You'll explore fundamental concepts in physics, chemistry, and mathematics, and learn how to apply these principles to solve real-world problems. The course covers critical topics such as mechanics, thermodynamics, materials science, and electrical circuits.

In addition to theoretical knowledge, you'll engage in hands-on projects and experiments that illustrate practical applications. You'll develop skills in data analysis, experimental design, and technical communication, preparing you for advanced study or a career in engineering and science.

Join us to unlock the potential of engineering and science, and start your journey towards innovation and discovery.

Marcos

4.88

(84)

80% of my students got accepted in the 2025 exam, I am sure I can help you out in the 2026 exam!

TU Delft is Europe's most prestigious university for aerospace studies, preparing some of the best engineers. However the selection procedure is tough and demanding, and only those prepared have a chance to succeed.

As a TU Delft student, I know from first hand how stressfull this process is, and can therefore help you succeed in the preparation of these exams. I have previous experience as a tutor back in high school, helping students improve their grades from Cs to As.

Moreover, I have an extensive knowledge on the subjects tested on these exams, having taken them myself, completed the courses at university with excellent grades and teaching over 10 students for the entrance exam.

Throughout the class, I will use a presentation to explain the main concepts of each exam (Maths, Physics and Aerospace Engineering), focusing on those subjects the student is struggling with most. After this, I will help the student complete some practice excercises, and then assign extra practice to complete on their own time. These exercises will then be reviewed in the following class to ensure the topics have been understood.

I am looking forward to help you in your journey as an aerospace engineer!

Yomna

4.88

(84)

This class is designed for engineering students and pre-university students who want to build a solid foundation in the most essential math topics used in engineering and technical fields.
→ Calculus
→ Linear Algebra
→ Ordinary Differential Equations (ODEs)
→ Numerical Analysis

Whether you're currently struggling with these subjects or preparing to study engineering soon, this course will help you understand the core concepts in a clear, step-by-step, and application-focused way — with examples that actually make sense in real life and engineering scenarios.

Reza

4.88

(84)

This tutoring class is designed to support Mechanical Engineering students in mastering core concepts of thermodynamics. I cover key topics such as the First and Second Laws of Thermodynamics, energy conservation, entropy, thermodynamic cycles (Carnot, Rankine, Otto, Brayton), and the analysis of closed and open systems. Emphasis is placed on clear explanations, worked examples, and strategies for solving complex engineering problems.

Core Thermodynamics topics that I teach include:
• Basic Concepts: Systems (closed, open), properties, processes, and energy forms
• First Law of Thermodynamics: Energy conservation in closed and open systems
• Applications: turbines, compressors, nozzles, heat exchangers
• Properties of Substances: Phase changes, property tables, ideal gas law, P-v-T behavior
• Second Law of Thermodynamics: Heat engines, refrigerators, Carnot cycle, reversibility
• Entropy: Entropy changes, T-s diagrams, irreversibility
• Thermodynamic Cycles: Otto, Diesel, Rankine, Brayton, and vapor-compression cycles

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Boaz

4.88

(84)

Maths for Everyone is a class designed for people who want to understand maths clearly and without fear. It is open to learners of all backgrounds, whether you struggled with maths before or simply want a stronger foundation.

The class focuses on real understanding rather than memorising formulas. Concepts are explained step by step using simple language, clear examples, and practical intuition. Students are encouraged to ask questions, make mistakes, and build confidence at their own pace.

Lessons are adapted to the level of the learners and may cover core arithmetic, algebra, functions, graphs, probability, basic statistics, and problem solving skills. The goal is not speed, but clarity and confidence.

No prior knowledge is required. The aim of this class is to make maths understandable, useful, and accessible to everyone.